From a7aabfb3a3bc26489983370b4f6e32fb39e907f7 Mon Sep 17 00:00:00 2001 From: Fede85 Date: Thu, 27 Jun 2013 12:16:14 +0200 Subject: EEPROM library to the new format --- .../EEPROM/examples/eeprom_write/eeprom_write.ino | 38 ---------------------- 1 file changed, 38 deletions(-) delete mode 100644 libraries/EEPROM/examples/eeprom_write/eeprom_write.ino (limited to 'libraries/EEPROM/examples/eeprom_write') diff --git a/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino deleted file mode 100644 index ae7c57e..0000000 --- a/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino +++ /dev/null @@ -1,38 +0,0 @@ -/* - * EEPROM Write - * - * Stores values read from analog input 0 into the EEPROM. - * These values will stay in the EEPROM when the board is - * turned off and may be retrieved later by another sketch. - */ - -#include - -// the current address in the EEPROM (i.e. which byte -// we're going to write to next) -int addr = 0; - -void setup() -{ -} - -void loop() -{ - // need to divide by 4 because analog inputs range from - // 0 to 1023 and each byte of the EEPROM can only hold a - // value from 0 to 255. - int val = analogRead(0) / 4; - - // write the value to the appropriate byte of the EEPROM. - // these values will remain there when the board is - // turned off. - EEPROM.write(addr, val); - - // advance to the next address. there are 512 bytes in - // the EEPROM, so go back to 0 when we hit 512. - addr = addr + 1; - if (addr == 512) - addr = 0; - - delay(100); -} -- cgit v1.2.3-18-g5258