From b5a130afb51c971fd7ceca8834b6055f1eada253 Mon Sep 17 00:00:00 2001
From: Federico Fissore <f.fissore@arduino.cc>
Date: Mon, 6 Jul 2015 15:18:33 +0200
Subject: Examples: mass code format. See example_formatter.conf

---
 .../EEPROM/examples/eeprom_put/eeprom_put.ino      | 34 ++++++++++++----------
 1 file changed, 18 insertions(+), 16 deletions(-)

(limited to 'libraries/EEPROM/examples/eeprom_put/eeprom_put.ino')

diff --git a/libraries/EEPROM/examples/eeprom_put/eeprom_put.ino b/libraries/EEPROM/examples/eeprom_put/eeprom_put.ino
index 186cf95..fe8a9fb 100644
--- a/libraries/EEPROM/examples/eeprom_put/eeprom_put.ino
+++ b/libraries/EEPROM/examples/eeprom_put/eeprom_put.ino
@@ -1,28 +1,28 @@
 /***
     eeprom_put example.
-    
+
     This shows how to use the EEPROM.put() method.
-    Also, this sketch will pre-set the EEPROM data for the 
+    Also, this sketch will pre-set the EEPROM data for the
     example sketch eeprom_get.
-    
+
     Note, unlike the single byte version EEPROM.write(),
     the put method will use update semantics. As in a byte
     will only be written to the EEPROM if the data is actually
     different.
 
     Written by Christopher Andrews 2015
-    Released under MIT licence.    
+    Released under MIT licence.
 ***/
 
 #include <EEPROM.h>
 
-struct MyObject{
+struct MyObject {
   float field1;
   byte field2;
   char name[10];
 };
 
-void setup(){
+void setup() {
 
   Serial.begin(9600);
   while (!Serial) {
@@ -31,15 +31,15 @@ void setup(){
 
   float f = 123.456f;  //Variable to store in EEPROM.
   int eeAddress = 0;   //Location we want the data to be put.
-  
-  
+
+
   //One simple call, with the address first and the object second.
-  EEPROM.put( eeAddress, f );
-  
+  EEPROM.put(eeAddress, f);
+
   Serial.println("Written float data type!");
-  
+
   /** Put is designed for use with custom structures also. **/
-  
+
   //Data to store.
   MyObject customVar = {
     3.14f,
@@ -48,9 +48,11 @@ void setup(){
   };
 
   eeAddress += sizeof(float); //Move address to the next byte after float 'f'.
-  
-  EEPROM.put( eeAddress, customVar );
-  Serial.print( "Written custom data type! \n\nView the example sketch eeprom_get to see how you can retrieve the values!" );
+
+  EEPROM.put(eeAddress, customVar);
+  Serial.print("Written custom data type! \n\nView the example sketch eeprom_get to see how you can retrieve the values!");
 }
 
-void loop(){ /* Empty loop */ }
\ No newline at end of file
+void loop() {
+  /* Empty loop */
+}
\ No newline at end of file
-- 
cgit v1.2.3-18-g5258