From beb9e08b79d5c59957c1532e50da30cccc318cac Mon Sep 17 00:00:00 2001 From: Federico Fissore Date: Mon, 15 Jul 2013 15:22:50 +0200 Subject: updated temboo examples (added ControlBySMS) --- .../examples/Temboo/ControlBySMS/ControlBySMS.ino | 443 +++++++++++++++++++++ 1 file changed, 443 insertions(+) create mode 100644 libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino (limited to 'libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino') diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino b/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino new file mode 100644 index 0000000..6543935 --- /dev/null +++ b/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino @@ -0,0 +1,443 @@ +/* + ControlBySMS + + Demonstrates using an SMS message to a Twilio account to turn an LED + on the Yun board on and off using the Temboo Arduino Yun SDK. + Sending a SMS with the text "LED ON" to your Twilio phone number + will turn on the LED on the Yun. Sending "LED OFF" will turn it off. + + Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino + + A Temboo account and application key are necessary to run all Temboo examples. + If you don't already have one, you can register for a free Temboo account at + http://www.temboo.com + + Since this sketch uses Twilio to retrieve the SMS, you'll also need a valid + Twilio account. You can create one for free at https://www.twilio.com. + + The sketch needs your Twilio Account SID and Auth Token you get when you + register with Twilio. Make sure to use the Account SID and Auth Token from + your Twilio Dashboard (not your test credentials from the Dev Tools panel). + + Normally, Twilio expects to contact a web site you provide to get a response + when an SMS message is received for your Twilio number. In this case, we + don't want to send any response (and we don't want to have to set up a web + site just to receive SMS messages.) You can use a URL that Twilio provides + for this purpose. When a message is received and sent to the Twilio "twimlets" + URL, it returns a code meaning "no response required." To set this up: + + 1. Log in to your Twilio account and go to this URL: + + https://www.twilio.com/user/account/phone-numbers/incoming + + 2. Select the Twilio number you want to receive SMS messages at. + + 3. Put this URL in the "SMS Request URL" field: + + http://twimlets.com/echo?Twiml=%3CResponse%3E%3C%2FResponse%3E + + See this link to Twilio's FAQ for details: + + https://www.twilio.com/help/faq/sms/how-can-i-receive-sms-messages-without-responding + + 4. Click the "Save Changes" button at the bottom of the page. + + Your account will now receive SMS messages, but won't send any responses. + + This example assumes basic familiarity with Arduino sketches, and that your Yun is connected + to the Internet. + + Looking for another API? We've got over 100 in our Library! + + This example code is in the public domain. +*/ + +#include +#include +#include "TembooAccount.h" // contains Temboo account information + // as described in the footer comment below + + + +/*** SUBSTITUTE YOUR VALUES BELOW: ***/ + +// Note that for additional security and reusability, you could +// use #define statements to specify these values in a .h file. + +// the Account SID from your Twilio account +const String TWILIO_ACCOUNT_SID = "xxxxxxxxxxxxxxxxxx"; + +// the Auth Token from your Twilio account +const String TWILIO_AUTH_TOKEN = "xxxxxxxxxxxxxxxxx"; + +// only act on messages sent from this phone number. (e.g. 15415551212) +const String FROM_PHONE_NUMBER = "xxxxxxxxxxx"; + +// how often (in milliseconds) to check for new SMS messages. +const unsigned long SMS_CHECK_PERIOD = 60000; + +// keep track of when we last checked for new messages +// (initialize it to SMS_CHECK_PERIOD seconds ago so +// we do the first check as soon as the sketch starts.) +unsigned long lastSMSCheckTime = -SMS_CHECK_PERIOD; + +// keep track of the ID of the last SMS message we processed. +// (we only need to process newer messages) +String lastSid; + +// we'll be turning the LED built in to the Yun on and off +// to simulate controlling some device. That LED is on pin 13. +int LED_PIN = 13; + +int numRuns = 1; // execution count, so this doesn't run forever +int maxRuns = 10; // the max number of times the Twitter HomeTimeline Choreo should run + + +void setup() { + Serial.begin(9600); + + // for debugging, wait until a serial console is connected + delay(4000); + while(!Serial); + + // tell the board to treat the LED pin as an output. + pinMode(LED_PIN, OUTPUT); + + // start with the LED off + digitalWrite(LED_PIN, LOW); + + // initialize the connection to the Linino processor. + Bridge.begin(); + + // Twilio will report old SMS messages. We want to + // ignore any existing control messages when we start. + Serial.println("Ignoring any existing control messages..."); + checkForMessages(true); + +} + +void loop() +{ + + // get the number of milliseconds the CPU has been running. + unsigned long now = millis(); + + // see if it's time to check for new SMS messages. + if (now - lastSMSCheckTime >= SMS_CHECK_PERIOD) { + + // it's time to check for new messages + // save this time so we know when to check next + lastSMSCheckTime = now; + + if (numRuns <= maxRuns) { + Serial.println("Checking for new SMS messages - Run #" + String(numRuns++)); + + // execute the choreo and don't ignore control messages. + checkForMessages(false); + } else { + Serial.println("Already ran " + String(maxRuns) + " times."); + } + } +} + +/* +This function executes the Twilio > SMSMessages > ListMessages choreo +and processes the results. + +If ignoreCommands is 'true', this function will read and process messages +updating 'lastSid', but will not actually take any action on any commands +found. This is so we can ignore any old control messages when we start. + +If ignoreCommands is 'false', control messages WILL be acted on. +*/ +void checkForMessages(bool ignoreCommands) { + + // we need a TembooChoreo object to send a Choreo request to Temboo + TembooChoreo ListMessagesChoreo; + + ListMessagesChoreo.begin(); + + // set Temboo account credentials + ListMessagesChoreo.setAccountName(TEMBOO_ACCOUNT); + ListMessagesChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); + ListMessagesChoreo.setAppKey(TEMBOO_APP_KEY); + + // identify the Temboo Library choreo to run (Twilio > SMSMessages > ListMessages) + ListMessagesChoreo.setChoreo("/Library/Twilio/SMSMessages/ListMessages"); + + // set the choreo inputs + // see https://www.temboo.com/library/Library/Twilio/SMSMessages/ListMessages/ + // for complete details about the inputs for this Choreo + + // the first input is a your Twilio AccountSID + ListMessagesChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID); + + // next is your Twilio Auth Token + ListMessagesChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN); + + // we only want to know about messages sent from our designated phone number + ListMessagesChoreo.addInput("From", FROM_PHONE_NUMBER); + + // Twilio can return information about up to 1000 messages at a time. + // we're only interested in the 3 most recent ones. Note that if + // this account receives lots of messages in quick succession, + // (more than 3 per minute in this case), we might miss some control + // messages. But if we request too many messages, we might run out of + // memory on the Arduino side of the Yun. + ListMessagesChoreo.addInput("PageSize", "3"); + + // We want the response in XML format to process with our + // XPath output filters. + ListMessagesChoreo.addInput("ResponseFormat", "xml"); + + // we don't want everything from the output, just the + // message IDs (the Sids) and the message texts + ListMessagesChoreo.addOutputFilter("sid", "Sid", "Response"); + ListMessagesChoreo.addOutputFilter("text", "Body", "Response"); + + // tell the Choreo to run and wait for the results. The + // return code (returnCode) will tell us whether the Temboo client + // was able to send our request to the Temboo servers + unsigned int returnCode = ListMessagesChoreo.run(); + + // a return code of zero (0) means success + if (returnCode == 0) { + + // Need a string to hold the list of message IDs. + String messageSids; + + // Need a string to hold the texts of the messages. + String messageTexts; + + // when the choreo results are available, process them. + // the output filters we specified will return comma delimited + // lists containing the Sids and texts of the messages + // from our designated phone number. + + while(ListMessagesChoreo.available()) { + + // output names are terminated with '\x1F' characters. + String name = ListMessagesChoreo.readStringUntil('\x1F'); + name.trim(); + //Serial.println(name); + + // output values are terminated with '\x1E' characters. + String data = ListMessagesChoreo.readStringUntil('\x1E'); + data.trim(); + //Serial.println(data); + + // assign the data to the appropriate string based on the name + if (name == "sid") { + messageSids = data; + } else if (name == "text") { + messageTexts = data; + } + } + + // done reading output, close the Choreo to free up resources. + ListMessagesChoreo.close(); + + // parse the comma delimited lists of messages and Sids + processMessages(messageTexts, messageSids, ignoreCommands); + + } else { + // a non-zero return code means there was an error + // read and print the error message + while(ListMessagesChoreo.available()) { + char c = ListMessagesChoreo.read(); + Serial.print(c); + } + } +} + +/* +This function processes the lists of message texts and Sids. +If a message contains a comma as part of the +message text, that message will be enclosed in double quotes +(") in the list. Example: + + A message,"Hey, now",Another message text + +If the message contains double quotes, it will be enclosed in +double quotes AND the internal quotes will be doubled. +Example: + + "Hi ""Sam"" the man", Led on + +NOTE! We are assuming that Twilio returns more recent messages +first. This isn't officially documented by Twilio, but we've +not seen any other case. + +'messageTexts' is a String containing a comma separated list of +message texts with commas and quotes escaped as described above. + +'messageSids' is a String containing a comma separated list of +message Sids. Sids should not contain embedded commas or quotes. + +'ignoreCommands' is a boolean. 'true' means and control messages +will not be acted upon. 'false' means control messages will be +acted upon in the usual way. +*/ +void processMessages(String messageTexts, String messageSids, bool ignoreCommands) { + + // proceed if we received at least one message + if (messageSids.length() > 0) { + int i = -1; + int sidsStart = 0; + int textsStart = 0; + String sid; + String text; + bool ledUpdated = false; + + // go through the list until we run out of items + // or otherwise know we can stop + do { + + // Output filter list items are separated by commas + // find the start of the next item in the list + i = messageSids.indexOf(',', sidsStart); + if (i >= 0) { + + //extract a single Sid from the list. + sid = messageSids.substring(sidsStart, i); + sidsStart = i + 1; + + // find the start of the next text in the list. + // Note that we have to be prepared to handle embedded + // quotes and commans in the message texts. + // The standard Arduino String class doesn't handle + // this, so we have to write our own function to do it. + i = quotedIndexOf(messageTexts, ',', textsStart); + if (i >= 0) { + + // extract a single message text from the list. + text = messageTexts.substring(textsStart, i); + textsStart = i + 1; + + // process the Sid and text to see if it's a + // control message. + ledUpdated = processMessage(sid, text, ignoreCommands); + } + } else { + + // the last item in the lists won't have a comma at the end, + // so we have to handle them specially. + // Since we know this is the last item, we can just + // take the rest of the string for the Sid and text. + sid = messageSids.substring(sidsStart); + text = messageTexts.substring(textsStart); + + // process the last item. + ledUpdated = processMessage(sid, text, ignoreCommands); + } + + // keep going until either we run out of list items + // or we run into a message we processed on a previous run. + } while ((i >=0) && (sid != lastSid)); + + // print what we've found to the serial monitor, + // just so we can see what's going on. + if (sid == lastSid) { + if (ledUpdated) + Serial.println("Control message processed."); + else + Serial.println("No new control messages received."); + } else { + Serial.println("No control messages received."); + } + } else { + Serial.println("No messages found"); + } +} + +/* +This function knows how to tell if a message is a control message +or not. It also knows know to control whatever it is we're controlling +(the state of the LED on pin 13 in this case.) + +A message with the text "LED ON" turns the LED on. +A message with the text "LED OFF" turns the LED off. +(Case is ignored.) + +If 'ignoreCommands' is true, the actions described above will NOT +take place. + +It also updates the 'lastSid' global variable when +a control message is processed. + +It returns 'true' if the message was a control message, and +'false' if it wasn't or if we've already processed this message. +*/ +bool processMessage(String sid, String text, bool ignoreCommands) { + + // a flag to indicate whether this was a control message or not + bool ledUpdated = false; + + // if we haven't already processed this message + if (sid != lastSid) { + + if (text.equalsIgnoreCase("LED ON")) { + + if (!ignoreCommands) { + //turn on the LED + digitalWrite(LED_PIN, HIGH); + Serial.println("LED ON"); + } + ledUpdated = true; + } else if (text.equalsIgnoreCase("LED OFF")) { + if (!ignoreCommands) { + //turn off the LED + digitalWrite(LED_PIN, LOW); + Serial.println("LED OFF"); + } + ledUpdated = true; + } + + // If the LED state was updated, remember the Sid if this message. + if (ledUpdated) + lastSid = sid; + } + return ledUpdated; +} + +/* +This function finds the index of a delimiter character in a String, +ignoring delimiters that appear inside double-quotes. +*/ +int quotedIndexOf(String s, char delim, int start) { + bool inQuotes = false; + char c; + int index = -1; + const char QUOTE = '"'; + do { + c = s[start++]; + if (c == QUOTE) + inQuotes = !inQuotes; + else if (c == delim && !inQuotes) + index = --start; + } while ((c != '\0') && (index < 0)); + return index; +} + + +/* + IMPORTANT NOTE: TembooAccount.h: + + TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. + You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, + by inserting your own Temboo account name and app key information. The contents of the file should + look like: + + #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name + #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name + #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key + + You can find your Temboo App Key information on the Temboo website, + under My Account > Application Keys + + The same TembooAccount.h file settings can be used for all Temboo SDK sketches. + + Keeping your account information in a separate file means you can save it once, + then just distribute the main .ino file without worrying that you forgot to delete your credentials. +*/ + -- cgit v1.2.3-18-g5258