From aa7d03ba9c6d61597b10d06804bfee7d53b45ce2 Mon Sep 17 00:00:00 2001
From: Federico Fissore <f.fissore@arduino.cc>
Date: Wed, 7 Aug 2013 17:16:13 +0200
Subject: spacebrew update

---
 .../spacebrewBoolean/spacebrewBoolean.ino          | 89 ++++++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino

(limited to 'libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean')

diff --git a/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino b/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino
new file mode 100644
index 0000000..0f068aa
--- /dev/null
+++ b/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino
@@ -0,0 +1,89 @@
+/*
+  Spacebrew Boolean
+ 
+ Demonstrates how to create a sketch that sends and receives a
+ boolean value to and from Spacebrew. Every time the buttton is 
+ pressed (or other digital input component) a spacebrew message 
+ is sent. The sketch also accepts analog range messages from 
+ other Spacebrew apps.
+
+ Make sure that your Yun is connected to the internet for this example 
+ to function properly.
+ 
+ The circuit:
+ - Button connected to Yun, using the Arduino's internal pullup resistor.
+ 
+ created 2013
+ by Julio Terra
+ 
+ This example code is in the public domain.
+ 
+ More information about Spacebrew is available at: 
+ http://spacebrew.cc/
+ 
+ */
+
+#include <Bridge.h>
+#include <SpacebrewYun.h>
+
+// create a variable of type SpacebrewYun and initialize it with the constructor
+SpacebrewYun sb = SpacebrewYun("spacebrewYun Boolean", "Boolean sender and receiver");
+
+// variable that holds the last potentiometer value
+int last_value = 0;
+
+// create variables to manage interval between each time we send a string
+void setup() { 
+
+	// start the serial port
+	Serial.begin(57600);
+
+	// for debugging, wait until a serial console is connected
+	delay(4000);
+	while (!Serial) { ; }
+
+	// start-up the bridge
+	Bridge.begin();
+
+	// configure the spacebrew object to print status messages to serial
+	sb.verbose(true);
+
+	// configure the spacebrew publisher and subscriber
+	sb.addPublish("physical button", "boolean");
+	sb.addSubscribe("virtual button", "boolean");
+
+	// register the string message handler method 
+	sb.onBooleanMessage(handleBoolean);
+
+	// connect to cloud spacebrew server at "sandbox.spacebrew.cc"
+	sb.connect("sandbox.spacebrew.cc"); 
+
+	pinMode(3, INPUT);
+	digitalWrite(3, HIGH);
+} 
+
+
+void loop() { 
+	// monitor spacebrew connection for new data
+	sb.monitor();
+
+	// connected to spacebrew then send a new value whenever the pot value changes
+	if ( sb.connected() ) {
+		int cur_value = digitalRead(3);
+		if ( last_value != cur_value ) {
+			if (cur_value == HIGH) sb.send("physical button", false);
+			else sb.send("physical button", true);
+			last_value = cur_value;
+		}
+	}
+} 
+
+// handler method that is called whenever a new string message is received 
+void handleBoolean (String route, boolean value) {
+	// print the message that was received
+	Serial.print("From ");
+	Serial.print(route);
+	Serial.print(", received msg: ");
+	Serial.println(value ? "true" : "false");
+}
+
-- 
cgit v1.2.3-18-g5258