From a3e2e68e2b7edb9f5434734bed4001df1e65451c Mon Sep 17 00:00:00 2001
From: Fede85 <f.vanzati@gmail.com>
Date: Fri, 6 Sep 2013 15:38:07 +0200
Subject: Bridge library to the 1.5 format

---
 .../examples/FileWriteScript/FileWriteScript.ino   | 82 ----------------------
 1 file changed, 82 deletions(-)
 delete mode 100644 libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino

(limited to 'libraries/Bridge/examples/FileWriteScript')

diff --git a/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino b/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino
deleted file mode 100644
index b550db2..0000000
--- a/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-  Write to file using FileIO classes.
- 
- This sketch demonstrate how to write file into the Yún filesystem.
- A shell script file is created in /tmp, and it is executed afterwards.
-
- created 7 June 2010
- by Cristian Maglie 
- 
- This example code is in the public domain.
-
- */
- 
-#include <FileIO.h>
-
-void setup() {
-  // Setup Bridge (needed every time we communicate with the Arduino Yún)
-  Bridge.begin();
-  // Initialize the Serial
-  Serial.begin(9600);
-  
-  while(!Serial);  // wait for Serial port to connect.
-  Serial.println("File Write Script example\n\n");
-  
-  // Setup File IO
-  FileSystem.begin();
-
-  // Upload script used to gain network statistics  
-  uploadScript();
-}  
-
-void loop() {
-  // Run stats script every 5 secs.
-  runScript();
-  delay(5000);
-}
-
-// this function creates a file into the linux processor that contains a shell script
-// to check the network traffic of the WiFi interface
-void uploadScript() {
-  // Write our shell script in /tmp
-  // Using /tmp stores the script in RAM this way we can preserve 
-  // the limited amount of FLASH erase/write cycles
-  File script = FileSystem.open("/tmp/wlan-stats.sh", FILE_WRITE);
-  // Shell script header 
-  script.print("#!/bin/sh\n");
-  // shell commands:
-  // ifconfig: is a command line utility for controlling the network interfaces.
-  //           wlan0 is the interface we want to query
-  // grep: search inside the output of the ifconfig command the "RX bytes" keyword
-  //       and extract the line that contains it
-  script.print("ifconfig wlan0 | grep 'RX bytes'\n");
-  script.close();  // close the file
-  
-  // Make the script executable
-  Process chmod;
-  chmod.begin("chmod");      // chmod: change mode
-  chmod.addParameter("+x");  // x stays for executable
-  chmod.addParameter("/tmp/wlan-stats.sh");  // path to the file to make it executable
-  chmod.run();
-}
-
-
-// this function run the script and read the output data
-void runScript() {
-  // Run the script and show results on the Serial
-  Process myscript;
-  myscript.begin("/tmp/wlan-stats.sh");
-  myscript.run();
-  
-  String output = "";
-  
-  // read the output of the script
-  while (myscript.available()) {
-    output += (char)myscript.read();
-  }
-  // remove the blank spaces at the beginning and the ending of the string
-  output.trim();
-  Serial.println(output);
-  Serial.flush();
-}
-
-- 
cgit v1.2.3-18-g5258