From a3e2e68e2b7edb9f5434734bed4001df1e65451c Mon Sep 17 00:00:00 2001
From: Fede85 <f.vanzati@gmail.com>
Date: Fri, 6 Sep 2013 15:38:07 +0200
Subject: Bridge library to the 1.5 format

---
 .../Bridge/examples/ConsolePixel/ConsolePixel.ino  | 62 ----------------------
 1 file changed, 62 deletions(-)
 delete mode 100644 libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino

(limited to 'libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino')

diff --git a/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino b/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino
deleted file mode 100644
index c962b6e..0000000
--- a/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-  Console Pixel
- 
- An example of using the Arduino board to receive data from the 
- Console on the Arduino Yun.  In this case, the Arduino boards turns on an LED when
- it receives the character 'H', and turns off the LED when it
- receives the character 'L'.
- 
- To see the Console, pick your Yún's name and IP address in the Port menu
- then open the Port Monitor. You can also see it by opening a terminal window
- and typing 
- ssh root@ yourYunsName.local 'telnet localhost 6571'
- then pressing enter. When prompted for the password, enter it.
- 
- 
- The circuit:
- * LED connected from digital pin 13 to ground
- 
- created 2006
- by David A. Mellis
- modified 25 Jun 2013
- by Tom Igoe 
- 
- This example code is in the public domain.
- 
- */
-
-#include <Console.h>
-
-const int ledPin = 13; // the pin that the LED is attached to
-char incomingByte;      // a variable to read incoming Console data into
-
-void setup() {
-  Bridge.begin();   // Initialize Bridge
-  Console.begin();  // Initialize Console
-
-  // Wait for the Console port to connect
-  while(!Console);
-
-  Console.println("type H or L to turn pin 13 on or off");
-
-  // initialize the LED pin as an output:
-  pinMode(ledPin, OUTPUT);
-}
-
-void loop() {
-  // see if there's incoming Console data:
-  if (Console.available() > 0) {
-    // read the oldest byte in the Console buffer:
-    incomingByte = Console.read();
-    Console.println(incomingByte);
-    // if it's a capital H (ASCII 72), turn on the LED:
-    if (incomingByte == 'H') {
-      digitalWrite(ledPin, HIGH);
-    } 
-    // if it's an L (ASCII 76) turn off the LED:
-    if (incomingByte == 'L') {
-      digitalWrite(ledPin, LOW);
-    }
-  }
-}
-
-- 
cgit v1.2.3-18-g5258