From fdfe4001d103d452ea6818f080a5020d3b75bd34 Mon Sep 17 00:00:00 2001
From: Federico Fissore <f.fissore@arduino.cc>
Date: Thu, 4 Jul 2013 16:33:10 +0200
Subject: BootWatcher removed BridgeNew is the new Bridge

---
 .../examples/BootWatcher001/BootWatcher001.ino     | 90 ----------------------
 1 file changed, 90 deletions(-)
 delete mode 100644 libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino

(limited to 'libraries/Bridge/examples/BootWatcher001')

diff --git a/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino b/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino
deleted file mode 100644
index 7833d54..0000000
--- a/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino
+++ /dev/null
@@ -1,90 +0,0 @@
-
-/*
-  Arduino Yun Boot watcher
- 
- Allows you to use the Yun's 32U4 processor as a
- serial terminal for the linino processor
- 
- Upload this to an Arduino Yun via serial (not WiFi) 
- then open the serial monitor at 115200 to see the boot process
- of the linino processor. You can also use the serial monitor
- as a basic command line interface for the linino processor using 
- this sketch.
- 
- The circuit:
- * Arduino Yun
- 
- created March 2013
- by Massimo Banzi
- modified 26 May 2013
- by Tom Igoe
- 
- This example code is in the public domain.
- */
-
-long baud = 115200;
-
-// Pin 13 has an LED connected on most Arduino boards.
-// give it a name:
-int led = 13;
-int ledState = HIGH;   // whether the LED is high or low      
-
-String bootString = "";
-int bootLineCount = 0;
-boolean booting = true;
-
-void setup() {
-  Serial.begin(baud);        // open serial connection to Linino
-  Serial1.begin(baud);       // open serial connection via USB-Serial
-
-  // initialize the digital pin as an output.
-  pinMode(led, OUTPUT);    
-  digitalWrite(led, ledState);   // turn the LED on (HIGH is the voltage level)
-  while(booting) {
-    listenForBoot();
-  }
-  delay(500);
-}
-
-
-void loop() {
-  // After booting, become a serial terminal:
-  if (Serial.available()) {           // got anything from USB-Serial?
-    char c = (char)Serial.read();     // read from USB-serial
-    Serial1.write(c);                 // write to Linino
-    ledState=!ledState;               // invert LED state
-    digitalWrite(led, ledState);      // toggle the LED
-  }
-  if (Serial1.available()) {          // got anything from Linino?         
-    char c = (char)Serial1.read();    // read from Linino  
-    Serial.write(c);                  // write to USB-serial
-  }
-
-}
-
-void listenForBoot() {
-  char c;
-  if (Serial1.available()) {     // got anything from Linino?         
-    c = (char)Serial1.read();    // read from Linino  
-    
-    if (c == '\n') {             // clear the bootString every newline
-      bootLineCount++;                // increment the boot line counter
-      Serial.println(bootLineCount);  // print the count
-      bootString = "";           // clear the boot string
-    } 
-    else {                       // anything other than newline, add to string
-      bootString += c;
-    }
-  }
-
-  // look for the final boot string message:
-  if (bootString.endsWith("entered forwarding state")) {
-    Serial1.println(); 
-  }
-
-  // look for the command prompt:
-  if (bootString.endsWith(":/#")) {
-    Serial.println("Ready for action.");
-    booting = false;
-  }
-}
-- 
cgit v1.2.3-18-g5258