From 4a7ef06b516dba4cdda939a16e5458c59592f6b1 Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 12:08:19 -0500 Subject: Delete 'firmwares' folder --- firmwares/wifishield/wifiHD/src/board_init.h | 313 --------------------------- 1 file changed, 313 deletions(-) delete mode 100644 firmwares/wifishield/wifiHD/src/board_init.h (limited to 'firmwares/wifishield/wifiHD/src/board_init.h') diff --git a/firmwares/wifishield/wifiHD/src/board_init.h b/firmwares/wifishield/wifiHD/src/board_init.h deleted file mode 100644 index 05a6609..0000000 --- a/firmwares/wifishield/wifiHD/src/board_init.h +++ /dev/null @@ -1,313 +0,0 @@ -/*! \page License - * Copyright (C) 2009, H&D Wireless AB All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of H&D Wireless AB may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY H&D WIRELESS AB ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND - * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#ifndef STARTUP_H -#define STARTUP_H - -#include -#include /* defines SPB104, SPB105 */ - -void board_init(void); - - - -/* - * - * EVK1100 - * --------------------------------------------------------------------------- - * - */ -#if BOARD == EVK1100 - -/* USART0 physical assignment */ -#define BOARD_RS232_0 AVR32_USART1 -#define BOARD_RS232_0_TX \ - { AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION } -#define BOARD_RS232_0_RX \ - { AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION } - -/* USART1 physical assignment */ -#define BOARD_RS232_1 AVR32_USART0 -#define BOARD_RS232_1_TX \ - { AVR32_USART0_TXD_0_0_PIN, AVR32_USART0_TXD_0_0_FUNCTION } -#define BOARD_RS232_1_RX \ - { AVR32_USART0_RXD_0_0_PIN, AVR32_USART0_RXD_0_0_FUNCTION }, - -/* Clocks */ -#define USE_PLL -#define OSC 0 -#define PLL_MUL 10 - -/* Wifi (SPB104 only) */ -#if defined(EXT_BOARD) -#if EXT_BOARD == SPB104 -#define WL_SPI AVR32_SPI1 /* Pin 8 NC, so no irq support if using SD-slot */ -#define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ -#define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI1_TX -#define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI1_RX -#define WL_SPI_CS 1 -#define WL_SPI_NPCS0 { AVR32_SPI1_NPCS_0_0_PIN, AVR32_SPI1_NPCS_0_0_FUNCTION } -#define WL_SPI_NPCS { AVR32_SPI1_NPCS_1_0_PIN, AVR32_SPI1_NPCS_1_0_FUNCTION } -#define WL_SPI_MISO { AVR32_SPI1_MISO_0_0_PIN, AVR32_SPI1_MISO_0_0_FUNCTION } -#define WL_SPI_MOSI { AVR32_SPI1_MOSI_0_0_PIN, AVR32_SPI1_MOSI_0_0_FUNCTION } -#define WL_SPI_SCK { AVR32_SPI1_SCK_0_0_PIN, AVR32_SPI1_SCK_0_0_FUNCTION } -#endif -#endif /* EXT_BOARD */ - - - - - - -/* - * - * EVK1101 - * --------------------------------------------------------------------------- - * - */ -#elif BOARD == EVK1101 - -/* USART0 physical assignment */ -#define BOARD_RS232_0 AVR32_USART1 -#define BOARD_RS232_0_TX \ - { AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION } -#define BOARD_RS232_0_RX \ - { AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION } - -/* Clocks */ -#define USE_PLL -#define OSC 0 -#define PLL_MUL 9 - -/* Wifi (SPB104 only) */ -#if defined(EXT_BOARD) -#if EXT_BOARD == SPB104 /* Pin 8 NC, so no irq support if using SD-slot */ -#define WL_SPI AVR32_SPI -#define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ -#define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI_TX -#define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI_RX -#define WL_SPI_CS 1 -#if EXT_BOARD == SPB105 - #define WL_SHUTDOWN_PIN AVR32_PIN_PA06 - #define WL_POWER_PIN AVR32_PIN_PA30 -#endif -#define WL_SPI_NPCS0 { AVR32_SPI_NPCS_0_0_PIN, AVR32_SPI_NPCS_0_0_FUNCTION } -#define WL_SPI_NPCS { AVR32_SPI_NPCS_1_0_PIN, AVR32_SPI_NPCS_1_0_FUNCTION } -#define WL_SPI_MISO { AVR32_SPI_MISO_0_0_PIN, AVR32_SPI_MISO_0_0_FUNCTION } -#define WL_SPI_MOSI { AVR32_SPI_MOSI_0_0_PIN, AVR32_SPI_MOSI_0_0_FUNCTION } -#define WL_SPI_SCK { AVR32_SPI_SCK_0_0_PIN, AVR32_SPI_SCK_0_0_FUNCTION } -#endif -#endif /* EXT_BOARD */ - - - - - - - -/* - * - * EVK1104 - * --------------------------------------------------------------------------- - * - */ -#elif BOARD == EVK1104 /* EVK1104 */ - -/* USART0 physical assignment */ -#define BOARD_RS232_0 AVR32_USART1 -#define BOARD_RS232_0_TX \ - { AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION } -#define BOARD_RS232_0_RX \ - { AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION } - -/* Clocks */ -#define USE_PLL -#define OSC 0 -#define PLL_MUL 9 /* for some reason we cant use 66 MHz */ - -/* Wifi (SDIO: SPB104 only; SPI: SPB105 only) */ -#if defined(EXT_BOARD) -#if EXT_BOARD == SPB105 - #define WL_SPI AVR32_SPI0 - #define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI0_TX - #define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI0_RX - #define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ - #define WL_SHUTDOWN_PIN AVR32_PIN_PA17 /* Pin 8 on RF-head -> Pin 4 on wifi */ - #define WL_IRQ_PIN AVR32_PIN_PA18 /* Pin 6 on RF-head -> Pin 3 on wifi */ - #define WL_IRQ AVR32_GPIO_IRQ_2 - #define WL_SPI_CS 3 - #define WL_SPI_NPCS { AVR32_SPI0_NPCS_3_1_PIN, AVR32_SPI0_NPCS_3_1_FUNCTION } - #define WL_SPI_MISO { AVR32_SPI0_MISO_0_0_PIN, AVR32_SPI0_MISO_0_0_FUNCTION } - #define WL_SPI_MOSI { AVR32_SPI0_MOSI_0_0_PIN, AVR32_SPI0_MOSI_0_0_FUNCTION } - #define WL_SPI_SCK { AVR32_SPI0_SCK_0_0_PIN, AVR32_SPI0_SCK_0_0_FUNCTION } -#elif EXT_BOARD == SPB104 - #ifdef SDIO_SLOT_A - #define WL_SDIO_CLK { AVR32_MCI_CLK_0_PIN, AVR32_MCI_CLK_0_FUNCTION } - #define WL_SDIO_CMD { AVR32_MCI_CMD_0_PIN, AVR32_MCI_CMD_0_FUNCTION } - #define WL_SDIO_DAT0 { AVR32_MCI_DATA_0_PIN, AVR32_MCI_DATA_0_FUNCTION } - #define WL_SDIO_DAT1 { AVR32_MCI_DATA_1_PIN, AVR32_MCI_DATA_1_FUNCTION } - #define WL_SDIO_DAT2 { AVR32_MCI_DATA_2_PIN, AVR32_MCI_DATA_2_FUNCTION } - #define WL_SDIO_DAT3 { AVR32_MCI_DATA_3_PIN, AVR32_MCI_DATA_3_FUNCTION } - #else - #define WL_SDIO_CLK { AVR32_MCI_CLK_0_PIN, AVR32_MCI_CLK_0_FUNCTION } - #define WL_SDIO_CMD { AVR32_MCI_CMD_1_0_PIN, AVR32_MCI_CMD_1_0_FUNCTION } - #define WL_SDIO_DAT0 { AVR32_MCI_DATA_8_0_PIN, AVR32_MCI_DATA_8_0_FUNCTION } - #define WL_SDIO_DAT1 { AVR32_MCI_DATA_9_0_PIN, AVR32_MCI_DATA_9_0_FUNCTION } - #define WL_SDIO_DAT2 { AVR32_MCI_DATA_10_0_PIN, AVR32_MCI_DATA_10_0_FUNCTION } - #define WL_SDIO_DAT3 { AVR32_MCI_DATA_11_0_PIN, AVR32_MCI_DATA_11_0_FUNCTION } - #endif -#endif -#endif /* EXT_BOARD */ - - - - - - - -/* - * - * EVK1105 - * --------------------------------------------------------------------------- - * - */ -#elif BOARD == EVK1105 /* EVK1105 */ - - -/* USART0 physical assignment */ -#define BOARD_RS232_0 AVR32_USART0 -#define BOARD_RS232_0_TX \ - { AVR32_USART0_TXD_0_0_PIN, AVR32_USART0_TXD_0_0_FUNCTION } -#define BOARD_RS232_0_RX \ - { AVR32_USART0_RXD_0_0_PIN, AVR32_USART0_RXD_0_0_FUNCTION } - -/* Clocks */ -#define USE_PLL -#define OSC 1 -#define PLL_MUL 10 - -/* Wifi SPB104/SPB105 */ -#if defined(EXT_BOARD) - #define WL_SPI AVR32_SPI0 - #define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI0_TX - #define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI0_RX - #if EXT_BOARD == SPB105 - #define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ - #define WL_SHUTDOWN_PIN AVR32_PIN_PB31 /* Pin 8 on RF-head -> Pin 4 on wifi */ - #define WL_IRQ_PIN AVR32_PIN_PB30 /* Pin 6 on RF-head -> Pin 3 on wifi */ - #define WL_IRQ AVR32_GPIO_IRQ_7 - #define WL_SPI_CS 2 - #elif EXT_BOARD == SPB104 - #define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */ - #define WL_SPI_CS 1 - #endif - #define WL_SPI_NPCS0 { AVR32_SPI0_NPCS_0_0_PIN, AVR32_SPI0_NPCS_0_0_FUNCTION } - #if WL_SPI_CS == 1 - #define WL_SPI_NPCS { AVR32_SPI0_NPCS_1_0_PIN, AVR32_SPI0_NPCS_1_0_FUNCTION } - #elif WL_SPI_CS == 2 - #define WL_SPI_NPCS { AVR32_SPI0_NPCS_2_0_PIN, AVR32_SPI0_NPCS_2_0_FUNCTION } - #endif - #define WL_SPI_MISO { AVR32_SPI0_MISO_0_0_PIN, AVR32_SPI0_MISO_0_0_FUNCTION } - #define WL_SPI_MOSI { AVR32_SPI0_MOSI_0_0_PIN, AVR32_SPI0_MOSI_0_0_FUNCTION } - #define WL_SPI_SCK { AVR32_SPI0_SCK_0_0_PIN, AVR32_SPI0_SCK_0_0_FUNCTION } -#endif /* EXT_BOARD */ - -/* - * - * ARDUINO - * --------------------------------------------------------------------------- - * - */ -#elif BOARD == ARDUINO /* ARDUINO */ - - -/* USART0 physical assignment */ -#define BOARD_RS232_1 AVR32_USART1 -#define BOARD_RS232_1_TX \ - { AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION } -#define BOARD_RS232_1_RX \ - { AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION } - -/* Clocks */ -#define USE_PLL -#define OSC 0 -#define PLL_MUL 8 - -#define WL_SPI AVR32_SPI1 -#define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI1_TX -#define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI1_RX - -#define WL_SHUTDOWN_PIN AVR32_PIN_PA09 -#define WL_IRQ_PIN AVR32_PIN_PA03 -/* -* WL_IRQ_# = (WL_IRQ_PIN / 32) * 4 + (WL_IRQ_PIN / 8) % 4 - * 3 => 0 * 4 + 0 = 0 -*/ -#define WL_IRQ AVR32_GPIO_IRQ_0 -#define WL_SPI_CS 0 -#define WL_RESET_PIN AVR32_PIN_PA07 -#define WL_EXTERNAL_RESET 1 - - -#define WL_SPI_NPCS { AVR32_SPI1_NPCS_0_0_PIN, AVR32_SPI1_NPCS_0_0_FUNCTION } -#define WL_SPI_MISO { AVR32_SPI1_MISO_0_0_PIN, AVR32_SPI1_MISO_0_0_FUNCTION } -#define WL_SPI_MOSI { AVR32_SPI1_MOSI_0_0_PIN, AVR32_SPI1_MOSI_0_0_FUNCTION } -#define WL_SPI_SCK { AVR32_SPI1_SCK_0_0_PIN, AVR32_SPI1_SCK_0_0_FUNCTION } - -#endif /* EVKxxxx */ - - - - - - - - - -#if OSC == 0 -# define FOSC FOSC0 /* 12 MHz */ -#else -# define FOSC FOSC1 /* 11.2896 MHz */ -#endif - -#ifdef USE_PLL -# define FMCK_HZ ((FOSC * (PLL_MUL + 1)) / 2) -#else -# define FMCK_HZ FOSC -#endif - -#define FCPU_HZ FMCK_HZ -#define FHSB_HZ FCPU_HZ -#define FPBB_HZ FMCK_HZ -#define FPBA_HZ FMCK_HZ - - -#ifndef CONFIG_CONSOLE_PORT -#define CONFIG_CONSOLE_PORT BOARD_RS232_1 -#endif - -#endif -- cgit v1.2.3-18-g5258