From 4a7ef06b516dba4cdda939a16e5458c59592f6b1 Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 12:08:19 -0500 Subject: Delete 'firmwares' folder --- .../SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h | 294 --------------------- 1 file changed, 294 deletions(-) delete mode 100644 firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h (limited to 'firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h') diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h deleted file mode 100644 index 38f931d..0000000 --- a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h +++ /dev/null @@ -1,294 +0,0 @@ -/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ - -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief Strings and integers print module for debug purposes. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices with a USART module can be used. - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2009 Atmel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an Atmel - * AVR product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE - * - */ - -#ifndef _PRINT_FUNCS_H_ -#define _PRINT_FUNCS_H_ - -#include -#include "board.h" - - -/*! \name USART Settings for the Debug Module - */ -//! @{ -#if BOARD == EVK1100 -# define DBG_USART (&AVR32_USART1) -# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION -# define DBG_USART_BAUDRATE 57600 -#elif BOARD == EVK1101 -# define DBG_USART (&AVR32_USART1) -# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION -# define DBG_USART_BAUDRATE 57600 -#elif BOARD == UC3C_EK -# define DBG_USART (&AVR32_USART2) -# define DBG_USART_RX_PIN AVR32_USART2_RXD_0_1_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART2_RXD_0_1_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART2_TXD_0_1_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART2_TXD_0_1_FUNCTION -# define DBG_USART_BAUDRATE 57600 -#elif BOARD == EVK1104 -# define DBG_USART (&AVR32_USART1) -# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION -# define DBG_USART_BAUDRATE 57600 -#elif BOARD == EVK1105 -# define DBG_USART (&AVR32_USART0) -# define DBG_USART_RX_PIN AVR32_USART0_RXD_0_0_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART0_RXD_0_0_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART0_TXD_0_0_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART0_TXD_0_0_FUNCTION -# define DBG_USART_BAUDRATE 57600 -#elif BOARD == STK1000 -# define DBG_USART (&AVR32_USART1) -# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_FUNCTION -# define DBG_USART_BAUDRATE 115200 -#elif BOARD == NGW100 -# define DBG_USART (&AVR32_USART1) -# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_FUNCTION -# define DBG_USART_BAUDRATE 115200 -#elif BOARD == STK600_RCUC3L0 -# define DBG_USART (&AVR32_USART1) -# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_1_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_1_FUNCTION -// For the RX pin, connect STK600.PORTE.PE3 to STK600.RS232 SPARE.RXD -# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_1_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_1_FUNCTION -// For the TX pin, connect STK600.PORTE.PE2 to STK600.RS232 SPARE.TXD -# define DBG_USART_BAUDRATE 57600 -# define DBG_USART_CLOCK_MASK AVR32_USART1_CLK_PBA -#elif BOARD == UC3L_EK -# define DBG_USART (&AVR32_USART3) -# define DBG_USART_RX_PIN AVR32_USART3_RXD_0_0_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART3_RXD_0_0_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART3_TXD_0_0_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART3_TXD_0_0_FUNCTION -# define DBG_USART_BAUDRATE 57600 -# define DBG_USART_CLOCK_MASK AVR32_USART3_CLK_PBA -#elif BOARD == ARDUINO -# define DBG_USART (&AVR32_USART1) -# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN -# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION -# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN -# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION -# define DBG_USART_BAUDRATE 57600 -# define DBG_USART_CLOCK_MASK AVR32_USART1_CLK_PBA -#endif - -#if !defined(DBG_USART) || \ - !defined(DBG_USART_RX_PIN) || \ - !defined(DBG_USART_RX_FUNCTION) || \ - !defined(DBG_USART_TX_PIN) || \ - !defined(DBG_USART_TX_FUNCTION) || \ - !defined(DBG_USART_BAUDRATE) -# error The USART configuration to use for debug on your board is missing -#endif -//! @} - -/*! \name VT100 Common Commands - */ -//! @{ -#define CLEARSCR "\x1B[2J\x1B[;H" //!< Clear screen. -#define CLEAREOL "\x1B[K" //!< Clear end of line. -#define CLEAREOS "\x1B[J" //!< Clear end of screen. -#define CLEARLCR "\x1B[0K" //!< Clear line cursor right. -#define CLEARLCL "\x1B[1K" //!< Clear line cursor left. -#define CLEARELN "\x1B[2K" //!< Clear entire line. -#define CLEARCDW "\x1B[0J" //!< Clear cursor down. -#define CLEARCUP "\x1B[1J" //!< Clear cursor up. -#define GOTOYX "\x1B[%.2d;%.2dH" //!< Set cursor to (y, x). -#define INSERTMOD "\x1B[4h" //!< Insert mode. -#define OVERWRITEMOD "\x1B[4l" //!< Overwrite mode. -#define DELAFCURSOR "\x1B[K" //!< Erase from cursor to end of line. -#define CRLF "\r\n" //!< Carriage Return + Line Feed. -//! @} - -/*! \name VT100 Cursor Commands - */ -//! @{ -#define CURSON "\x1B[?25h" //!< Show cursor. -#define CURSOFF "\x1B[?25l" //!< Hide cursor. -//! @} - -/*! \name VT100 Character Commands - */ -//! @{ -#define NORMAL "\x1B[0m" //!< Normal. -#define BOLD "\x1B[1m" //!< Bold. -#define UNDERLINE "\x1B[4m" //!< Underline. -#define BLINKING "\x1B[5m" //!< Blink. -#define INVVIDEO "\x1B[7m" //!< Inverse video. -//! @} - -/*! \name VT100 Color Commands - */ -//! @{ -#define CL_BLACK "\033[22;30m" //!< Black. -#define CL_RED "\033[22;31m" //!< Red. -#define CL_GREEN "\033[22;32m" //!< Green. -#define CL_BROWN "\033[22;33m" //!< Brown. -#define CL_BLUE "\033[22;34m" //!< Blue. -#define CL_MAGENTA "\033[22;35m" //!< Magenta. -#define CL_CYAN "\033[22;36m" //!< Cyan. -#define CL_GRAY "\033[22;37m" //!< Gray. -#define CL_DARKGRAY "\033[01;30m" //!< Dark gray. -#define CL_LIGHTRED "\033[01;31m" //!< Light red. -#define CL_LIGHTGREEN "\033[01;32m" //!< Light green. -#define CL_YELLOW "\033[01;33m" //!< Yellow. -#define CL_LIGHTBLUE "\033[01;34m" //!< Light blue. -#define CL_LIGHTMAGENTA "\033[01;35m" //!< Light magenta. -#define CL_LIGHTCYAN "\033[01;36m" //!< Light cyan. -#define CL_WHITE "\033[01;37m" //!< White. -//! @} - - -/*! \brief Sets up DBG_USART with 8N1 at DBG_USART_BAUDRATE. - * - * \param pba_hz PBA clock frequency (Hz). - */ -extern void init_dbg_rs232(long pba_hz); - -/*! \brief Sets up DBG_USART with 8N1 at a given baud rate. - * - * \param baudrate Baud rate to set DBG_USART to. - * \param pba_hz PBA clock frequency (Hz). - */ -extern void init_dbg_rs232_ex(unsigned long baudrate, long pba_hz); - -/*! \brief Prints a string of characters to DBG_USART. - * - * \param str The string of characters to print. - */ -extern void print_dbg(const char *str); - -/*! \brief Prints a character to DBG_USART. - * - * \param c The character to print. - */ -extern void print_dbg_char(int c); - -/*! \brief Prints an integer to DBG_USART in a decimal representation. - * - * \param n The integer to print. - */ -extern void print_dbg_ulong(unsigned long n); - -/*! \brief Prints a char to DBG_USART in an hexadecimal representation. - * - * \param n The char to print. - */ -extern void print_dbg_char_hex(unsigned char n); - -/*! \brief Prints a short integer to DBG_USART in an hexadecimal representation. - * - * \param n The short integer to print. - */ -extern void print_dbg_short_hex(unsigned short n); - -/*! \brief Prints an integer to DBG_USART in an hexadecimal representation. - * - * \param n The integer to print. - */ -extern void print_dbg_hex(unsigned long n); - -/*! \brief Prints a string of characters to a given USART. - * - * \param usart Base address of the USART instance to print to. - * \param str The string of characters to print. - */ -extern void print(volatile avr32_usart_t *usart, const char *str); - -/*! \brief Prints a character to a given USART. - * - * \param usart Base address of the USART instance to print to. - * \param c The character to print. - */ -extern void print_char(volatile avr32_usart_t *usart, int c); - -/*! \brief Prints an integer to a given USART in a decimal representation. - * - * \param usart Base address of the USART instance to print to. - * \param n The integer to print. - */ -extern void print_ulong(volatile avr32_usart_t *usart, unsigned long n); - -/*! \brief Prints a char to a given USART in an hexadecimal representation. - * - * \param usart Base address of the USART instance to print to. - * \param n The char to print. - */ -extern void print_char_hex(volatile avr32_usart_t *usart, unsigned char n); - -/*! \brief Prints a short integer to a given USART in an hexadecimal - * representation. - * - * \param usart Base address of the USART instance to print to. - * \param n The short integer to print. - */ -extern void print_short_hex(volatile avr32_usart_t *usart, unsigned short n); - -/*! \brief Prints an integer to a given USART in an hexadecimal representation. - * - * \param usart Base address of the USART instance to print to. - * \param n The integer to print. - */ -extern void print_hex(volatile avr32_usart_t *usart, unsigned long n); - - -#endif // _PRINT_FUNCS_H_ -- cgit v1.2.3-18-g5258