From 0d9a111face4f3629bcae8e52af843792af3b453 Mon Sep 17 00:00:00 2001 From: "David A. Mellis" Date: Thu, 13 Sep 2012 10:41:16 -0400 Subject: Moving into firmwares directory. --- .../SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h | 294 +++++++++++++++++++++ 1 file changed, 294 insertions(+) create mode 100644 firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h (limited to 'firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h') diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h new file mode 100644 index 0000000..38f931d --- /dev/null +++ b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.h @@ -0,0 +1,294 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Strings and integers print module for debug purposes. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with a USART module can be used. + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _PRINT_FUNCS_H_ +#define _PRINT_FUNCS_H_ + +#include +#include "board.h" + + +/*! \name USART Settings for the Debug Module + */ +//! @{ +#if BOARD == EVK1100 +# define DBG_USART (&AVR32_USART1) +# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION +# define DBG_USART_BAUDRATE 57600 +#elif BOARD == EVK1101 +# define DBG_USART (&AVR32_USART1) +# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION +# define DBG_USART_BAUDRATE 57600 +#elif BOARD == UC3C_EK +# define DBG_USART (&AVR32_USART2) +# define DBG_USART_RX_PIN AVR32_USART2_RXD_0_1_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART2_RXD_0_1_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART2_TXD_0_1_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART2_TXD_0_1_FUNCTION +# define DBG_USART_BAUDRATE 57600 +#elif BOARD == EVK1104 +# define DBG_USART (&AVR32_USART1) +# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION +# define DBG_USART_BAUDRATE 57600 +#elif BOARD == EVK1105 +# define DBG_USART (&AVR32_USART0) +# define DBG_USART_RX_PIN AVR32_USART0_RXD_0_0_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART0_RXD_0_0_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART0_TXD_0_0_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART0_TXD_0_0_FUNCTION +# define DBG_USART_BAUDRATE 57600 +#elif BOARD == STK1000 +# define DBG_USART (&AVR32_USART1) +# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_FUNCTION +# define DBG_USART_BAUDRATE 115200 +#elif BOARD == NGW100 +# define DBG_USART (&AVR32_USART1) +# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_FUNCTION +# define DBG_USART_BAUDRATE 115200 +#elif BOARD == STK600_RCUC3L0 +# define DBG_USART (&AVR32_USART1) +# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_1_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_1_FUNCTION +// For the RX pin, connect STK600.PORTE.PE3 to STK600.RS232 SPARE.RXD +# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_1_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_1_FUNCTION +// For the TX pin, connect STK600.PORTE.PE2 to STK600.RS232 SPARE.TXD +# define DBG_USART_BAUDRATE 57600 +# define DBG_USART_CLOCK_MASK AVR32_USART1_CLK_PBA +#elif BOARD == UC3L_EK +# define DBG_USART (&AVR32_USART3) +# define DBG_USART_RX_PIN AVR32_USART3_RXD_0_0_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART3_RXD_0_0_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART3_TXD_0_0_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART3_TXD_0_0_FUNCTION +# define DBG_USART_BAUDRATE 57600 +# define DBG_USART_CLOCK_MASK AVR32_USART3_CLK_PBA +#elif BOARD == ARDUINO +# define DBG_USART (&AVR32_USART1) +# define DBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN +# define DBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION +# define DBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN +# define DBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION +# define DBG_USART_BAUDRATE 57600 +# define DBG_USART_CLOCK_MASK AVR32_USART1_CLK_PBA +#endif + +#if !defined(DBG_USART) || \ + !defined(DBG_USART_RX_PIN) || \ + !defined(DBG_USART_RX_FUNCTION) || \ + !defined(DBG_USART_TX_PIN) || \ + !defined(DBG_USART_TX_FUNCTION) || \ + !defined(DBG_USART_BAUDRATE) +# error The USART configuration to use for debug on your board is missing +#endif +//! @} + +/*! \name VT100 Common Commands + */ +//! @{ +#define CLEARSCR "\x1B[2J\x1B[;H" //!< Clear screen. +#define CLEAREOL "\x1B[K" //!< Clear end of line. +#define CLEAREOS "\x1B[J" //!< Clear end of screen. +#define CLEARLCR "\x1B[0K" //!< Clear line cursor right. +#define CLEARLCL "\x1B[1K" //!< Clear line cursor left. +#define CLEARELN "\x1B[2K" //!< Clear entire line. +#define CLEARCDW "\x1B[0J" //!< Clear cursor down. +#define CLEARCUP "\x1B[1J" //!< Clear cursor up. +#define GOTOYX "\x1B[%.2d;%.2dH" //!< Set cursor to (y, x). +#define INSERTMOD "\x1B[4h" //!< Insert mode. +#define OVERWRITEMOD "\x1B[4l" //!< Overwrite mode. +#define DELAFCURSOR "\x1B[K" //!< Erase from cursor to end of line. +#define CRLF "\r\n" //!< Carriage Return + Line Feed. +//! @} + +/*! \name VT100 Cursor Commands + */ +//! @{ +#define CURSON "\x1B[?25h" //!< Show cursor. +#define CURSOFF "\x1B[?25l" //!< Hide cursor. +//! @} + +/*! \name VT100 Character Commands + */ +//! @{ +#define NORMAL "\x1B[0m" //!< Normal. +#define BOLD "\x1B[1m" //!< Bold. +#define UNDERLINE "\x1B[4m" //!< Underline. +#define BLINKING "\x1B[5m" //!< Blink. +#define INVVIDEO "\x1B[7m" //!< Inverse video. +//! @} + +/*! \name VT100 Color Commands + */ +//! @{ +#define CL_BLACK "\033[22;30m" //!< Black. +#define CL_RED "\033[22;31m" //!< Red. +#define CL_GREEN "\033[22;32m" //!< Green. +#define CL_BROWN "\033[22;33m" //!< Brown. +#define CL_BLUE "\033[22;34m" //!< Blue. +#define CL_MAGENTA "\033[22;35m" //!< Magenta. +#define CL_CYAN "\033[22;36m" //!< Cyan. +#define CL_GRAY "\033[22;37m" //!< Gray. +#define CL_DARKGRAY "\033[01;30m" //!< Dark gray. +#define CL_LIGHTRED "\033[01;31m" //!< Light red. +#define CL_LIGHTGREEN "\033[01;32m" //!< Light green. +#define CL_YELLOW "\033[01;33m" //!< Yellow. +#define CL_LIGHTBLUE "\033[01;34m" //!< Light blue. +#define CL_LIGHTMAGENTA "\033[01;35m" //!< Light magenta. +#define CL_LIGHTCYAN "\033[01;36m" //!< Light cyan. +#define CL_WHITE "\033[01;37m" //!< White. +//! @} + + +/*! \brief Sets up DBG_USART with 8N1 at DBG_USART_BAUDRATE. + * + * \param pba_hz PBA clock frequency (Hz). + */ +extern void init_dbg_rs232(long pba_hz); + +/*! \brief Sets up DBG_USART with 8N1 at a given baud rate. + * + * \param baudrate Baud rate to set DBG_USART to. + * \param pba_hz PBA clock frequency (Hz). + */ +extern void init_dbg_rs232_ex(unsigned long baudrate, long pba_hz); + +/*! \brief Prints a string of characters to DBG_USART. + * + * \param str The string of characters to print. + */ +extern void print_dbg(const char *str); + +/*! \brief Prints a character to DBG_USART. + * + * \param c The character to print. + */ +extern void print_dbg_char(int c); + +/*! \brief Prints an integer to DBG_USART in a decimal representation. + * + * \param n The integer to print. + */ +extern void print_dbg_ulong(unsigned long n); + +/*! \brief Prints a char to DBG_USART in an hexadecimal representation. + * + * \param n The char to print. + */ +extern void print_dbg_char_hex(unsigned char n); + +/*! \brief Prints a short integer to DBG_USART in an hexadecimal representation. + * + * \param n The short integer to print. + */ +extern void print_dbg_short_hex(unsigned short n); + +/*! \brief Prints an integer to DBG_USART in an hexadecimal representation. + * + * \param n The integer to print. + */ +extern void print_dbg_hex(unsigned long n); + +/*! \brief Prints a string of characters to a given USART. + * + * \param usart Base address of the USART instance to print to. + * \param str The string of characters to print. + */ +extern void print(volatile avr32_usart_t *usart, const char *str); + +/*! \brief Prints a character to a given USART. + * + * \param usart Base address of the USART instance to print to. + * \param c The character to print. + */ +extern void print_char(volatile avr32_usart_t *usart, int c); + +/*! \brief Prints an integer to a given USART in a decimal representation. + * + * \param usart Base address of the USART instance to print to. + * \param n The integer to print. + */ +extern void print_ulong(volatile avr32_usart_t *usart, unsigned long n); + +/*! \brief Prints a char to a given USART in an hexadecimal representation. + * + * \param usart Base address of the USART instance to print to. + * \param n The char to print. + */ +extern void print_char_hex(volatile avr32_usart_t *usart, unsigned char n); + +/*! \brief Prints a short integer to a given USART in an hexadecimal + * representation. + * + * \param usart Base address of the USART instance to print to. + * \param n The short integer to print. + */ +extern void print_short_hex(volatile avr32_usart_t *usart, unsigned short n); + +/*! \brief Prints an integer to a given USART in an hexadecimal representation. + * + * \param usart Base address of the USART instance to print to. + * \param n The integer to print. + */ +extern void print_hex(volatile avr32_usart_t *usart, unsigned long n); + + +#endif // _PRINT_FUNCS_H_ -- cgit v1.2.3-18-g5258