From 4a7ef06b516dba4cdda939a16e5458c59592f6b1 Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 12:08:19 -0500 Subject: Delete 'firmwares' folder --- .../src/SOFTWARE_FRAMEWORK/DRIVERS/EIC/eic.h | 275 --------------------- 1 file changed, 275 deletions(-) delete mode 100644 firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/EIC/eic.h (limited to 'firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/EIC/eic.h') diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/EIC/eic.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/EIC/eic.h deleted file mode 100644 index 32641b7..0000000 --- a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/EIC/eic.h +++ /dev/null @@ -1,275 +0,0 @@ -/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ - -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief EIC driver for AVR32 UC3. - * - * AVR32 External Interrupt Controller driver module. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices with an EIC module can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2009 Atmel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an Atmel - * AVR product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE - * - */ - -#ifndef _EIC_H_ -#define _EIC_H_ - -#include "compiler.h" - -/*! \name External Interrupt lines - */ -//! @{ -#if (UC3A || UC3B) -#define EXT_INT0 AVR32_EIC_INT0 //!< Line 0 -#define EXT_INT1 AVR32_EIC_INT1 //!< Line 1 -#define EXT_INT2 AVR32_EIC_INT2 //!< Line 2 -#define EXT_INT3 AVR32_EIC_INT3 //!< Line 3 -#define EXT_INT4 AVR32_EIC_INT4 //!< Line 4 -#define EXT_INT5 AVR32_EIC_INT5 //!< Line 5 -#define EXT_INT6 AVR32_EIC_INT6 //!< Line 6 -#define EXT_INT7 AVR32_EIC_INT7 //!< Line 7 -#define EXT_NMI AVR32_EIC_NMI //!< Line 8 -#else -#define EXT_INT0 AVR32_EIC_INT1 //!< Line 0 -#define EXT_INT1 AVR32_EIC_INT2 //!< Line 1 -#define EXT_INT2 AVR32_EIC_INT3 //!< Line 2 -#define EXT_INT3 AVR32_EIC_INT4 //!< Line 3 -#define EXT_INT4 AVR32_EIC_INT5 //!< Line 4 -#define EXT_INT5 AVR32_EIC_INT6 //!< Line 5 -#define EXT_INT6 AVR32_EIC_INT7 //!< Line 6 -#define EXT_INT7 AVR32_EIC_INT8 //!< Line 7 -#define EXT_NMI AVR32_EIC_NMI //!< Line 8 - -#endif - -//! @} - -/*! \name Mode Trigger Options - */ -//! @{ -#define EIC_MODE_EDGE_TRIGGERED AVR32_EIC_EDGE_IRQ //!< -#define EIC_MODE_LEVEL_TRIGGERED AVR32_EIC_LEVEL_IRQ //!< -//! @} - -/*! \name Edge level Options - */ -//! @{ -#define EIC_EDGE_FALLING_EDGE AVR32_EIC_FALLING_EDGE //!< -#define EIC_EDGE_RISING_EDGE AVR32_EIC_RISING_EDGE //!< -//! @} - -/*! \name Level Options - */ -//! @{ -#define EIC_LEVEL_LOW_LEVEL AVR32_EIC_LOW_LEVEL //!< -#define EIC_LEVEL_HIGH_LEVEL AVR32_EIC_HIGH_LEVEL //!< -//! @} - -/*! \name Filter Options - */ -//! @{ -#define EIC_FILTER_ENABLED AVR32_EIC_FILTER_ON //!< -#define EIC_FILTER_DISABLED AVR32_EIC_FILTER_OFF //!< -//! @} - -/*! \name Synch Mode Options - */ -//! @{ -#define EIC_SYNCH_MODE AVR32_EIC_SYNC //!< -#define EIC_ASYNCH_MODE AVR32_EIC_USE_ASYNC //!< -//! @} - -//! Configuration parameters of the EIC module. -typedef struct -{ - //!Line - unsigned char eic_line; - - //! Mode : EDGE_LEVEL or TRIGGER_LEVEL - unsigned char eic_mode; - - //! Edge : FALLING_EDGE or RISING_EDGE - unsigned char eic_edge; - - //! Level : LOW_LEVEL or HIGH_LEVEL - unsigned char eic_level; - - //! Filter: NOT_FILTERED or FILTERED - unsigned char eic_filter; - - //! Async: SYNC mode or ASYNC - unsigned char eic_async; - -} eic_options_t; - - -/*! \brief Init the EIC driver. - * - * \param eic Base address of the EIC module - * \param opt Configuration parameters of the EIC module (see \ref eic_options_t) - * \param nb_lines Number of lines to consider, equal to size of opt buffer - */ -extern void eic_init(volatile avr32_eic_t *eic, const eic_options_t *opt, unsigned int nb_lines); - -/*! \brief Enable the EIC driver. - * - * \param eic Base address of the EIC module - * \param mask_lines Mask for current selected lines - */ -extern void eic_enable_lines(volatile avr32_eic_t *eic, unsigned int mask_lines); - -/*! \brief Enable the EIC driver. - * - * \param eic Base address of the EIC module - * \param line_number Line number to enable - */ -extern void eic_enable_line(volatile avr32_eic_t *eic, unsigned int line_number); - -/*! \brief Disable the EIC driver. - * - * \param eic Base address of the EIC module - * \param mask_lines Mask for current selected lines - */ -extern void eic_disable_lines(volatile avr32_eic_t *eic, unsigned int mask_lines); - -/*! \brief Disable the EIC driver. - * - * \param eic Base address of the EIC module - * \param line_number Line number to disable - */ -extern void eic_disable_line(volatile avr32_eic_t *eic, unsigned int line_number); - -/*! \brief Tells whether an EIC line is enabled. - * - * \param eic Base address of the EIC module - * \param line_number Line number to test - * - * \return Whether an EIC line is enabled. - */ -extern Bool eic_is_line_enabled(volatile avr32_eic_t *eic, unsigned int line_number); - -/*! \name Interrupt Control Functions - */ -//! @{ - -/*! \brief Enable the interrupt feature of the EIC. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - * \param mask_lines Mask for current selected lines - */ -extern void eic_enable_interrupt_lines(volatile avr32_eic_t *eic, unsigned int mask_lines); - -/*! \brief Enable the interrupt feature of the EIC. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - * \param line_number Line number to enable - */ -extern void eic_enable_interrupt_line(volatile avr32_eic_t *eic, unsigned int line_number); - -/*! \brief Disable the interrupt feature of the EIC. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - * \param mask_lines Mask for current selected lines - */ -extern void eic_disable_interrupt_lines(volatile avr32_eic_t *eic, unsigned int mask_lines); - -/*! \brief Disable the interrupt feature of the EIC. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - * \param line_number Line number to disable - */ -extern void eic_disable_interrupt_line(volatile avr32_eic_t *eic, unsigned int line_number); - -/*! \brief Tells whether an EIC interrupt line is enabled. - * - * \param eic Base address of the EIC module - * \param line_number Line number to test - * - * \return Whether an EIC interrupt line is enabled. - */ -extern Bool eic_is_interrupt_line_enabled(volatile avr32_eic_t *eic, unsigned int line_number); - -/*! \brief Clear the interrupt flag. - * Call this function once you've handled the interrupt. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - * \param mask_lines Mask for current selected lines - */ -extern void eic_clear_interrupt_lines(volatile avr32_eic_t *eic, unsigned int mask_lines); - -/*! \brief Clear the interrupt flag. - * Call this function once you've handled the interrupt. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - * \param line_number Line number to clear - */ -extern void eic_clear_interrupt_line(volatile avr32_eic_t *eic, unsigned int line_number); - -/*! \brief Tells whether an EIC interrupt line is pending. - * - * \param eic Base address of the EIC module - * \param line_number Line number to test - * - * \return Whether an EIC interrupt line is pending. - */ -extern Bool eic_is_interrupt_line_pending(volatile avr32_eic_t *eic, unsigned int line_number); - -/*! \brief Enable the interrupt scan feature of the EIC. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - * \param presc Prescale select for the keypad scan rate in the range [0,31]. - */ -extern void eic_enable_interrupt_scan(volatile avr32_eic_t *eic, unsigned int presc); - -/*! \brief Disable the interrupt scan feature of the EIC. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - */ -extern void eic_disable_interrupt_scan(volatile avr32_eic_t *eic); - -/*! \brief Return scan pad number that causes interrupt. - * - * \param eic Base address of the EIC (i.e. &AVR32_EIC). - */ -extern unsigned long eic_get_interrupt_pad_scan(volatile avr32_eic_t *eic); - -//! @} - - -#endif // _EIC_H_ -- cgit v1.2.3-18-g5258