From 6225a8596005bfb0be68fa641f5b47d01a95c12d Mon Sep 17 00:00:00 2001 From: "David A. Mellis" Date: Thu, 13 Sep 2012 10:39:59 -0400 Subject: Moving ATmegaXXU2 firmwares into subdirectory. --- .../atmegaxxu2/arduino-usbserial/Descriptors.c | 277 +++++++++++++++++++++ 1 file changed, 277 insertions(+) create mode 100755 firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c (limited to 'firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c') diff --git a/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c b/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c new file mode 100755 index 0000000..705dddf --- /dev/null +++ b/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c @@ -0,0 +1,277 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + +/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as + * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. + * This allows the host to track a device across insertions on different ports, allowing them to retain allocated + * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices + * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value + * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and + * port location). + */ +#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) + #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. +#endif + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(01.10), + .Class = 0x02, + .SubClass = 0x00, + .Protocol = 0x00, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, // Atmel + + .ProductID = 0x204B, // LUFA USB to Serial Demo Application + .ReleaseNumber = 0x0001, + + .ManufacturerStrIndex = 0x01, + .ProductStrIndex = 0x02, + .SerialNumStrIndex = USE_INTERNAL_SERIAL, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 2, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .CDC_CCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = 0, + .AlternateSetting = 0, + + .TotalEndpoints = 1, + + .Class = 0x02, + .SubClass = 0x02, + .Protocol = 0x01, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_Functional_IntHeader = + { + .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24}, + .SubType = 0x00, + + .Data = {0x01, 0x10} + }, + + .CDC_Functional_AbstractControlManagement = + { + .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24}, + .SubType = 0x02, + + .Data = {0x06} + }, + + .CDC_Functional_Union = + { + .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24}, + .SubType = 0x06, + + .Data = {0x00, 0x01} + }, + + .CDC_NotificationEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_NOTIFICATION_EPSIZE, + .PollingIntervalMS = 0xFF + }, + + .CDC_DCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = 1, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = 0x0A, + .SubClass = 0x00, + .Protocol = 0x00, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x01 + }, + + .CDC_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x01 + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +USB_Descriptor_String_t PROGMEM LanguageString = +{ + .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, + + .UnicodeString = {LANGUAGE_ID_ENG} +}; + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +USB_Descriptor_String_t PROGMEM ManufacturerString = +{ + .Header = {.Size = USB_STRING_LEN(24), .Type = DTYPE_String}, + + .UnicodeString = L"Arduino (www.arduino.cc)" +}; + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +USB_Descriptor_String_t PROGMEM ProductString = +{ + #if (ARDUINO_MODEL_PID == ARDUINO_UNO_PID) + .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, + + .UnicodeString = L"Arduino Uno" + #elif (ARDUINO_MODEL_PID == ARDUINO_MEGA2560_PID) + .Header = {.Size = USB_STRING_LEN(17), .Type = DTYPE_String}, + + .UnicodeString = L"Arduino Mega 2560" + #endif + +}; + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = (void*)&DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = (void*)&ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case 0x00: + Address = (void*)&LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case 0x01: + Address = (void*)&ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case 0x02: + Address = (void*)&ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} -- cgit v1.2.3-18-g5258