From 4a7ef06b516dba4cdda939a16e5458c59592f6b1 Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 12:08:19 -0500 Subject: Delete 'firmwares' folder --- .../arduino-usbserial/Arduino-usbserial.c | 242 --------------------- 1 file changed, 242 deletions(-) delete mode 100644 firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c (limited to 'firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c') diff --git a/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c b/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c deleted file mode 100644 index 4de73c8..0000000 --- a/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2010. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the Arduino-usbserial project. This file contains the main tasks of - * the project and is responsible for the initial application hardware configuration. - */ - -#include "Arduino-usbserial.h" - -/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */ -RingBuff_t USBtoUSART_Buffer; - -/** Circular buffer to hold data from the serial port before it is sent to the host. */ -RingBuff_t USARTtoUSB_Buffer; - -/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ -volatile struct -{ - uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ - uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ - uint8_t PingPongLEDPulse; /**< Milliseconds remaining for enumeration Tx/Rx ping-pong LED pulse */ -} PulseMSRemaining; - -/** LUFA CDC Class driver interface configuration and state information. This structure is - * passed to all CDC Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = - { - .Config = - { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, - }, - }; - -/** Main program entry point. This routine contains the overall program flow, including initial - * setup of all components and the main program loop. - */ -int main(void) -{ - SetupHardware(); - - RingBuffer_InitBuffer(&USBtoUSART_Buffer); - RingBuffer_InitBuffer(&USARTtoUSB_Buffer); - - sei(); - - for (;;) - { - /* Only try to read in bytes from the CDC interface if the transmit buffer is not full */ - if (!(RingBuffer_IsFull(&USBtoUSART_Buffer))) - { - int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); - - /* Read bytes from the USB OUT endpoint into the USART transmit buffer */ - if (!(ReceivedByte < 0)) - RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte); - } - - /* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */ - RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer); - if ((TIFR0 & (1 << TOV0)) || (BufferCount > BUFFER_NEARLY_FULL)) - { - TIFR0 |= (1 << TOV0); - - if (USARTtoUSB_Buffer.Count) { - LEDs_TurnOnLEDs(LEDMASK_TX); - PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS; - } - - /* Read bytes from the USART receive buffer into the USB IN endpoint */ - while (BufferCount--) - CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&USARTtoUSB_Buffer)); - - /* Turn off TX LED(s) once the TX pulse period has elapsed */ - if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse)) - LEDs_TurnOffLEDs(LEDMASK_TX); - - /* Turn off RX LED(s) once the RX pulse period has elapsed */ - if (PulseMSRemaining.RxLEDPulse && !(--PulseMSRemaining.RxLEDPulse)) - LEDs_TurnOffLEDs(LEDMASK_RX); - } - - /* Load the next byte from the USART transmit buffer into the USART */ - if (!(RingBuffer_IsEmpty(&USBtoUSART_Buffer))) { - Serial_TxByte(RingBuffer_Remove(&USBtoUSART_Buffer)); - - LEDs_TurnOnLEDs(LEDMASK_RX); - PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS; - } - - CDC_Device_USBTask(&VirtualSerial_CDC_Interface); - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Hardware Initialization */ - Serial_Init(9600, false); - LEDs_Init(); - USB_Init(); - - /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */ - TCCR0B = (1 << CS02); - - /* Pull target /RESET line high */ - AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK; - AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK; -} - -/** Event handler for the library USB Configuration Changed event. */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface); -} - -/** Event handler for the library USB Unhandled Control Request event. */ -void EVENT_USB_Device_UnhandledControlRequest(void) -{ - CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); -} - -/** Event handler for the CDC Class driver Line Encoding Changed event. - * - * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced - */ -void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) -{ - uint8_t ConfigMask = 0; - - switch (CDCInterfaceInfo->State.LineEncoding.ParityType) - { - case CDC_PARITY_Odd: - ConfigMask = ((1 << UPM11) | (1 << UPM10)); - break; - case CDC_PARITY_Even: - ConfigMask = (1 << UPM11); - break; - } - - if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits) - ConfigMask |= (1 << USBS1); - - switch (CDCInterfaceInfo->State.LineEncoding.DataBits) - { - case 6: - ConfigMask |= (1 << UCSZ10); - break; - case 7: - ConfigMask |= (1 << UCSZ11); - break; - case 8: - ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10)); - break; - } - - /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */ - UCSR1B = 0; - UCSR1A = 0; - UCSR1C = 0; - - /* Special case 57600 baud for compatibility with the ATmega328 bootloader. */ - UBRR1 = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) - ? SERIAL_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS) - : SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS); - - UCSR1C = ConfigMask; - UCSR1A = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) ? 0 : (1 << U2X1); - UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1)); -} - -/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer - * for later transmission to the host. - */ -ISR(USART1_RX_vect, ISR_BLOCK) -{ - uint8_t ReceivedByte = UDR1; - - if (USB_DeviceState == DEVICE_STATE_Configured) - RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte); -} - -/** Event handler for the CDC Class driver Host-to-Device Line Encoding Changed event. - * - * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced - */ -void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) -{ - bool CurrentDTRState = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR); - - if (CurrentDTRState) - AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK; - else - AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK; -} -- cgit v1.2.3-18-g5258