From b0e6e58efbed41642766112a9812e249b644946b Mon Sep 17 00:00:00 2001 From: "David A. Mellis" Date: Fri, 24 Sep 2010 10:35:54 -0400 Subject: Adding usbserial and usbdfu firmwares (and combined compiled .hex files). --- firmwares/arduino-usbdfu/readme.txt | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 firmwares/arduino-usbdfu/readme.txt (limited to 'firmwares/arduino-usbdfu/readme.txt') diff --git a/firmwares/arduino-usbdfu/readme.txt b/firmwares/arduino-usbdfu/readme.txt new file mode 100644 index 0000000..e376679 --- /dev/null +++ b/firmwares/arduino-usbdfu/readme.txt @@ -0,0 +1,7 @@ +To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader: +1. unpack the source into LUFA's Bootloader directory +2. set ARDUINO_MODEL_PID in the makefile as appropriate +3. do "make clean; make; make program" + +Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU". Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory) + -- cgit v1.2.3-18-g5258