From f3893aba50116631007060697169b0150fd5caf8 Mon Sep 17 00:00:00 2001 From: "David A. Mellis" Date: Wed, 5 Mar 2008 02:50:11 +0000 Subject: Incorporating a modified version of oli.keller's Makefile (prepends #include and appends main() among other things). --- cores/arduino/Makefile | 168 +++++++++++++++++++++++++------------------------ 1 file changed, 87 insertions(+), 81 deletions(-) (limited to 'cores') diff --git a/cores/arduino/Makefile b/cores/arduino/Makefile index f0c1047..32eda14 100755 --- a/cores/arduino/Makefile +++ b/cores/arduino/Makefile @@ -1,77 +1,61 @@ -# Arduino makefile +# Arduino 0011 Makefile +# Arduino adaptation by mellis, eighthave, oli.keller # # This makefile allows you to build sketches from the command line # without the Arduino environment (or Java). # -# The Arduino environment does preliminary processing on a sketch before -# compiling it. If you're using this makefile instead, you'll need to do -# a few things differently: +# Detailed instructions for using the makefile: # -# - Give your program's file a .cpp extension (e.g. foo.cpp). -# -# - Put this line at top of your code: #include -# -# - Write prototypes for all your functions (or define them before you -# call them). A prototype declares the types of parameters a -# function will take and what type of value it will return. This -# means that you can have a call to a function before the definition -# of the function. A function prototype looks like the first line of -# the function, with a semi-colon at the end. For example: -# int digitalRead(int pin); -# -# - Write a main() function for your program that returns an int, calls -# init() and setup() once (in that order), and then calls loop() -# repeatedly(): -# -# int main() -# { -# init(); -# setup(); -# -# for (;;) -# loop(); -# -# return 0; -# } -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. +# 1. Copy this file into the folder with your sketch. There should be a +# file with the extension .pde (e.g. foo.pde) # # 2. Below, modify the line containing "TARGET" to refer to the name of # of your program's file without an extension (e.g. TARGET = foo). # -# 3. Modify the line containg "ARDUINO" to point the directory that -# contains the Arduino core (for normal Arduino installations, this -# is the hardware/cores/arduino sub-directory). +# 3. Modify the line containg "INSTALL_DIR" to point to the directory that +# contains the Arduino installation (for example, under Mac OS X, this +# might be /Applications/arduino-0011). # # 4. Modify the line containing "PORT" to refer to the filename # representing the USB or serial connection to your Arduino board # (e.g. PORT = /dev/tty.USB0). If the exact name of this file # changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). # -# 5. At the command line, change to the directory containing your +# 5. Set the line containing "MCU" to match your board's processor. +# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth +# or Diecimila have the atmega168. If you're using a LilyPad Arduino, +# change F_CPU to 8000000. +# +# 6. At the command line, change to the directory containing your # program's file and the makefile. # -# 6. Type "make" and press enter to compile/verify your program. +# 7. Type "make" and press enter to compile/verify your program. # -# 7. Type "make upload", reset your Arduino board, and press enter to +# 8. Type "make upload", reset your Arduino board, and press enter to # upload your program to the Arduino board. # # $Id$ -PORT = /dev/tty.usbserial* TARGET = foo -ARDUINO = arduino -SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \ +INSTALL_DIR = /Users/dmellis/Source/arduino/trunk/build/macosx/build/work +PORT = /dev/tty.usb* +UPLOAD_RATE = 19200 +AVRDUDE_PROGRAMMER = stk500v1 +MCU = atmega168 +F_CPU = 16000000 + +############################################################################ +# Below here nothing should be changed... + +ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino +AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin +SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \ $(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \ $(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \ $(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c -CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp -MCU = atmega168 -F_CPU = 16000000 +CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp FORMAT = ihex -UPLOAD_RATE = 19200 + # Name of this Makefile (used for "make depend"). MAKEFILE = Makefile @@ -109,26 +93,26 @@ LDFLAGS = -lm # Programming support using avrdude. Settings and variables. -AVRDUDE_PROGRAMMER = stk500 AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ - -b $(UPLOAD_RATE) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \ +-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ +-b $(UPLOAD_RATE) # Program settings -CC = avr-gcc -CXX = avr-g++ -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -AR = avr-ar -SIZE = avr-size -NM = avr-nm -AVRDUDE = avrdude +CC = $(AVR_TOOLS_PATH)/avr-gcc +CXX = $(AVR_TOOLS_PATH)/avr-g++ +OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy +OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump +AR = $(AVR_TOOLS_PATH)/avr-ar +SIZE = $(AVR_TOOLS_PATH)/avr-size +NM = $(AVR_TOOLS_PATH)/avr-nm +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude REMOVE = rm -f MV = mv -f # Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) # Define all listing files. LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) @@ -141,21 +125,42 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: build - -build: elf hex - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym +all: applet_files build sizeafter + +build: elf hex + +applet_files: $(TARGET).pde + # Here is the "preprocessing". + # It creates a .cpp file based with the same name as the .pde file. + # On top of the new .cpp file comes the WProgram.h header. + # At the end there is a generic main() function attached. + # Then the .cpp file will be compiled. Errors during compile will + # refer to this new, automatically generated, file. + # Not the original .pde file you actually edit... + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp + +elf: applet/$(TARGET).elf +hex: applet/$(TARGET).hex +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym # Program the device. -upload: $(TARGET).hex +upload: applet/$(TARGET).hex $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + # Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex +ELFSIZE = $(SIZE) applet/$(TARGET).elf +sizebefore: + @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi + +sizeafter: + @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. @@ -166,12 +171,12 @@ COFFCONVERT=$(OBJCOPY) --debugging \ --change-section-address .eeprom-0x810000 -coff: $(TARGET).elf - $(COFFCONVERT) -O coff-avr $(TARGET).elf $(TARGET).cof +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof extcoff: $(TARGET).elf - $(COFFCONVERT) -O coff-ext-avr $(TARGET).elf $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof .SUFFIXES: .elf .hex .eep .lss .sym @@ -191,13 +196,14 @@ extcoff: $(TARGET).elf .elf.sym: $(NM) -n $< > $@ + # Link: create ELF output file from library. +applet/$(TARGET).elf: $(TARGET).pde applet/core.a + $(CC) $(ALL_CFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS) + +applet/core.a: $(OBJ) + @for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done -core.a: $(OBJ) - @for i in $(OBJ); do echo $(AR) rcs core.a $$i; $(AR) rcs core.a $$i; done -# Link: create ELF output file from library. -$(TARGET).elf: core.a - $(CC) $(ALL_CFLAGS) -o $@ $(TARGET).cpp -L. core.a $(LDFLAGS) # Compile: create object files from C++ source files. .cpp.o: @@ -221,8 +227,8 @@ $(TARGET).elf: core.a # Target: clean project. clean: - $(REMOVE) $(TARGET).hex $(TARGET).eep $(TARGET).cof $(TARGET).elf \ - $(TARGET).map $(TARGET).sym $(TARGET).lss core.a \ + $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ + applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \ $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) depend: @@ -236,4 +242,4 @@ depend: >> $(MAKEFILE); \ $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE) -.PHONY: all build elf hex eep lss sym program coff extcoff clean depend +.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter -- cgit v1.2.3-18-g5258