From 563f69b870a7f71026c50605b531ed40d667b0a2 Mon Sep 17 00:00:00 2001 From: HampusM Date: Mon, 7 Mar 2022 13:48:57 +0100 Subject: rename arduino core dir to xinput --- cores/xinput/HardwareSerial.h | 161 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 161 insertions(+) create mode 100644 cores/xinput/HardwareSerial.h (limited to 'cores/xinput/HardwareSerial.h') diff --git a/cores/xinput/HardwareSerial.h b/cores/xinput/HardwareSerial.h new file mode 100644 index 0000000..6ff29d0 --- /dev/null +++ b/cores/xinput/HardwareSerial.h @@ -0,0 +1,161 @@ +/* + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus + Modified 3 December 2013 by Matthijs Kooijman +*/ + +#ifndef HardwareSerial_h +#define HardwareSerial_h + +#include + +#include "Stream.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which head is the index of the location +// to which to write the next incoming character and tail is the index of the +// location from which to read. +// NOTE: a "power of 2" buffer size is recommended to dramatically +// optimize all the modulo operations for ring buffers. +// WARNING: When buffer sizes are increased to > 256, the buffer index +// variables are automatically increased in size, but the extra +// atomicity guards needed for that are not implemented. This will +// often work, but occasionally a race condition can occur that makes +// Serial behave erratically. See https://github.com/arduino/Arduino/issues/2405 +#if !defined(SERIAL_TX_BUFFER_SIZE) +#if ((RAMEND - RAMSTART) < 1023) +#define SERIAL_TX_BUFFER_SIZE 16 +#else +#define SERIAL_TX_BUFFER_SIZE 64 +#endif +#endif +#if !defined(SERIAL_RX_BUFFER_SIZE) +#if ((RAMEND - RAMSTART) < 1023) +#define SERIAL_RX_BUFFER_SIZE 16 +#else +#define SERIAL_RX_BUFFER_SIZE 64 +#endif +#endif +#if (SERIAL_TX_BUFFER_SIZE>256) +typedef uint16_t tx_buffer_index_t; +#else +typedef uint8_t tx_buffer_index_t; +#endif +#if (SERIAL_RX_BUFFER_SIZE>256) +typedef uint16_t rx_buffer_index_t; +#else +typedef uint8_t rx_buffer_index_t; +#endif + +// Define config for Serial.begin(baud, config); +#define SERIAL_5N1 0x00 +#define SERIAL_6N1 0x02 +#define SERIAL_7N1 0x04 +#define SERIAL_8N1 0x06 +#define SERIAL_5N2 0x08 +#define SERIAL_6N2 0x0A +#define SERIAL_7N2 0x0C +#define SERIAL_8N2 0x0E +#define SERIAL_5E1 0x20 +#define SERIAL_6E1 0x22 +#define SERIAL_7E1 0x24 +#define SERIAL_8E1 0x26 +#define SERIAL_5E2 0x28 +#define SERIAL_6E2 0x2A +#define SERIAL_7E2 0x2C +#define SERIAL_8E2 0x2E +#define SERIAL_5O1 0x30 +#define SERIAL_6O1 0x32 +#define SERIAL_7O1 0x34 +#define SERIAL_8O1 0x36 +#define SERIAL_5O2 0x38 +#define SERIAL_6O2 0x3A +#define SERIAL_7O2 0x3C +#define SERIAL_8O2 0x3E + +class HardwareSerial : public Stream +{ + protected: + volatile uint8_t * const _ubrrh; + volatile uint8_t * const _ubrrl; + volatile uint8_t * const _ucsra; + volatile uint8_t * const _ucsrb; + volatile uint8_t * const _ucsrc; + volatile uint8_t * const _udr; + // Has any byte been written to the UART since begin() + bool _written; + + volatile rx_buffer_index_t _rx_buffer_head; + volatile rx_buffer_index_t _rx_buffer_tail; + volatile tx_buffer_index_t _tx_buffer_head; + volatile tx_buffer_index_t _tx_buffer_tail; + + // Don't put any members after these buffers, since only the first + // 32 bytes of this struct can be accessed quickly using the ldd + // instruction. + unsigned char _rx_buffer[SERIAL_RX_BUFFER_SIZE]; + unsigned char _tx_buffer[SERIAL_TX_BUFFER_SIZE]; + + public: + inline HardwareSerial( + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *ucsrc, volatile uint8_t *udr); + void begin(unsigned long baud) { begin(baud, SERIAL_8N1); } + void begin(unsigned long, uint8_t); + void end(); + virtual int available(void); + virtual int peek(void); + virtual int read(void); + virtual int availableForWrite(void); + virtual void flush(void); + virtual size_t write(uint8_t); + inline size_t write(unsigned long n) { return write((uint8_t)n); } + inline size_t write(long n) { return write((uint8_t)n); } + inline size_t write(unsigned int n) { return write((uint8_t)n); } + inline size_t write(int n) { return write((uint8_t)n); } + using Print::write; // pull in write(str) and write(buf, size) from Print + operator bool() { return true; } + + // Interrupt handlers - Not intended to be called externally + inline void _rx_complete_irq(void); + void _tx_udr_empty_irq(void); +}; + +#if defined(UBRRH) || defined(UBRR0H) + extern HardwareSerial Serial; + #define HAVE_HWSERIAL0 +#endif +#if defined(UBRR1H) + extern HardwareSerial Serial1; + #define HAVE_HWSERIAL1 +#endif +#if defined(UBRR2H) + extern HardwareSerial Serial2; + #define HAVE_HWSERIAL2 +#endif +#if defined(UBRR3H) + extern HardwareSerial Serial3; + #define HAVE_HWSERIAL3 +#endif + +extern void serialEventRun(void) __attribute__((weak)); + +#endif -- cgit v1.2.3-18-g5258