From 699e9c09ce7a23b1ec0292ac763477e4be743acc Mon Sep 17 00:00:00 2001 From: jantje Date: Sun, 23 Mar 2014 23:12:00 +0100 Subject: This commit contains 2 changes: Added support for different size of TX and RX buffer sizes. Added support for buffer sizes bigger than 256 bytes. Added support for different size of TX and RX buffer sizes. The default values remain the same. If you want to have different values define SERIAL_TX_BUFFER_SIZE and SERIAL_RX_BUFFER_SIZE on the command line Added support for buffer sizes bigger than 256 bytes. The type of the indexes is decided upon the size of the buffers. So there is no increase in program/data size when the buffers are smaller than 257 --- cores/arduino/HardwareSerial.cpp | 8 ++++---- cores/arduino/HardwareSerial.h | 25 +++++++++++++++++-------- 2 files changed, 21 insertions(+), 12 deletions(-) (limited to 'cores/arduino') diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp index a270ace..a634b28 100644 --- a/cores/arduino/HardwareSerial.cpp +++ b/cores/arduino/HardwareSerial.cpp @@ -83,7 +83,7 @@ void HardwareSerial::_tx_udr_empty_irq(void) // If interrupts are enabled, there must be more data in the output // buffer. Send the next byte unsigned char c = _tx_buffer[_tx_buffer_tail]; - _tx_buffer_tail = (_tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE; + _tx_buffer_tail = (_tx_buffer_tail + 1) % SERIAL_TX_BUFFER_SIZE; *_udr = c; @@ -152,7 +152,7 @@ void HardwareSerial::end() int HardwareSerial::available(void) { - return (unsigned int)(SERIAL_BUFFER_SIZE + _rx_buffer_head - _rx_buffer_tail) % SERIAL_BUFFER_SIZE; + return (unsigned int)(SERIAL_RX_BUFFER_SIZE + _rx_buffer_head - _rx_buffer_tail) % SERIAL_RX_BUFFER_SIZE; } int HardwareSerial::peek(void) @@ -171,7 +171,7 @@ int HardwareSerial::read(void) return -1; } else { unsigned char c = _rx_buffer[_rx_buffer_tail]; - _rx_buffer_tail = (uint8_t)(_rx_buffer_tail + 1) % SERIAL_BUFFER_SIZE; + _rx_buffer_tail = (BUFPOINTER)(_rx_buffer_tail + 1) % SERIAL_RX_BUFFER_SIZE; return c; } } @@ -207,7 +207,7 @@ size_t HardwareSerial::write(uint8_t c) sbi(*_ucsra, TXC0); return 1; } - uint8_t i = (_tx_buffer_head + 1) % SERIAL_BUFFER_SIZE; + BUFPOINTER i = (_tx_buffer_head + 1) % SERIAL_TX_BUFFER_SIZE; // If the output buffer is full, there's nothing for it other than to // wait for the interrupt handler to empty it a bit diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h index 226bf57..e21e55b 100644 --- a/cores/arduino/HardwareSerial.h +++ b/cores/arduino/HardwareSerial.h @@ -32,10 +32,19 @@ // using a ring buffer (I think), in which head is the index of the location // to which to write the next incoming character and tail is the index of the // location from which to read. +#if !(defined(SERIAL_TX_BUFFER_SIZE)&&defined(SERIAL_RX_BUFFER_SIZE)) #if (RAMEND < 1000) - #define SERIAL_BUFFER_SIZE 16 +#define SERIAL_TX_BUFFER_SIZE 16 +#define SERIAL_RX_BUFFER_SIZE 16 #else - #define SERIAL_BUFFER_SIZE 64 +#define SERIAL_TX_BUFFER_SIZE 64 +#define SERIAL_RX_BUFFER_SIZE 64 +#endif +#endif +#if (SERIAL_TX_BUFFER_SIZE>255) || (SERIAL_RX_BUFFER_SIZE>255) +#define BUFPOINTER uint16_t +#else +#define BUFPOINTER uint8_t #endif // Define config for Serial.begin(baud, config); @@ -76,16 +85,16 @@ class HardwareSerial : public Stream // Has any byte been written to the UART since begin() bool _written; - volatile uint8_t _rx_buffer_head; - volatile uint8_t _rx_buffer_tail; - volatile uint8_t _tx_buffer_head; - volatile uint8_t _tx_buffer_tail; + volatile BUFPOINTER _rx_buffer_head; + volatile BUFPOINTER _rx_buffer_tail; + volatile BUFPOINTER _tx_buffer_head; + volatile BUFPOINTER _tx_buffer_tail; // Don't put any members after these buffers, since only the first // 32 bytes of this struct can be accessed quickly using the ldd // instruction. - unsigned char _rx_buffer[SERIAL_BUFFER_SIZE]; - unsigned char _tx_buffer[SERIAL_BUFFER_SIZE]; + unsigned char _rx_buffer[SERIAL_RX_BUFFER_SIZE]; + unsigned char _tx_buffer[SERIAL_TX_BUFFER_SIZE]; public: inline HardwareSerial( -- cgit v1.2.3-18-g5258 From f87e11534aaf48475856a210b2b473988d70a43d Mon Sep 17 00:00:00 2001 From: jantje Date: Mon, 24 Mar 2014 21:40:12 +0100 Subject: Added support for different size of TX and RX buffer sizes. Added support for buffer sizes bigger than 256 bytes. Added possibility to overrule the default size. Added support for different size of TX and RX buffer sizes. The default values remain the same. You can however specify a different value for TX and RX buffer Added possibility to overrule the default size. If you want to have different values define SERIAL_TX_BUFFER_SIZE and SERIAL_RX_BUFFER_SIZE on the command line Added support for buffer sizes bigger than 256 bytes. Because of the possibility to change the size of the buffer sizes longer than 256 must be supported. The type of the indexes is decided upon the size of the buffers. So there is no increase in program/data size when the buffers are smaller than 257 --- cores/arduino/HardwareSerial.cpp | 4 ++-- cores/arduino/HardwareSerial.h | 21 +++++++++++++-------- 2 files changed, 15 insertions(+), 10 deletions(-) (limited to 'cores/arduino') diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp index a634b28..b9dce07 100644 --- a/cores/arduino/HardwareSerial.cpp +++ b/cores/arduino/HardwareSerial.cpp @@ -171,7 +171,7 @@ int HardwareSerial::read(void) return -1; } else { unsigned char c = _rx_buffer[_rx_buffer_tail]; - _rx_buffer_tail = (BUFPOINTER)(_rx_buffer_tail + 1) % SERIAL_RX_BUFFER_SIZE; + _rx_buffer_tail = (rx_buffer_index_t)(_rx_buffer_tail + 1) % SERIAL_RX_BUFFER_SIZE; return c; } } @@ -207,7 +207,7 @@ size_t HardwareSerial::write(uint8_t c) sbi(*_ucsra, TXC0); return 1; } - BUFPOINTER i = (_tx_buffer_head + 1) % SERIAL_TX_BUFFER_SIZE; + tx_buffer_index_t i = (_tx_buffer_head + 1) % SERIAL_TX_BUFFER_SIZE; // If the output buffer is full, there's nothing for it other than to // wait for the interrupt handler to empty it a bit diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h index e21e55b..b96e5d0 100644 --- a/cores/arduino/HardwareSerial.h +++ b/cores/arduino/HardwareSerial.h @@ -32,7 +32,7 @@ // using a ring buffer (I think), in which head is the index of the location // to which to write the next incoming character and tail is the index of the // location from which to read. -#if !(defined(SERIAL_TX_BUFFER_SIZE)&&defined(SERIAL_RX_BUFFER_SIZE)) +#if !(defined(SERIAL_TX_BUFFER_SIZE) && defined(SERIAL_RX_BUFFER_SIZE)) #if (RAMEND < 1000) #define SERIAL_TX_BUFFER_SIZE 16 #define SERIAL_RX_BUFFER_SIZE 16 @@ -41,10 +41,15 @@ #define SERIAL_RX_BUFFER_SIZE 64 #endif #endif -#if (SERIAL_TX_BUFFER_SIZE>255) || (SERIAL_RX_BUFFER_SIZE>255) -#define BUFPOINTER uint16_t +#if (SERIAL_TX_BUFFER_SIZE>256) +typedef uint16_t tx_buffer_index_t; #else -#define BUFPOINTER uint8_t +typedef uint8_t tx_buffer_index_t; +#endif +#if (SERIAL_RX_BUFFER_SIZE>256) +typedef uint16_t rx_buffer_index_t; +#else +typedef uint8_t rx_buffer_index_t; #endif // Define config for Serial.begin(baud, config); @@ -85,10 +90,10 @@ class HardwareSerial : public Stream // Has any byte been written to the UART since begin() bool _written; - volatile BUFPOINTER _rx_buffer_head; - volatile BUFPOINTER _rx_buffer_tail; - volatile BUFPOINTER _tx_buffer_head; - volatile BUFPOINTER _tx_buffer_tail; + volatile rx_buffer_index_t _rx_buffer_head; + volatile rx_buffer_index_t _rx_buffer_tail; + volatile tx_buffer_index_t _tx_buffer_head; + volatile tx_buffer_index_t _tx_buffer_tail; // Don't put any members after these buffers, since only the first // 32 bytes of this struct can be accessed quickly using the ldd -- cgit v1.2.3-18-g5258 From 098307de60f9fab4ff56640bfce7bdb35c608a6f Mon Sep 17 00:00:00 2001 From: jantje Date: Tue, 1 Apr 2014 16:14:16 +0200 Subject: I forgot a file --- cores/arduino/HardwareSerial_private.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'cores/arduino') diff --git a/cores/arduino/HardwareSerial_private.h b/cores/arduino/HardwareSerial_private.h index fa20e55..9e98da6 100644 --- a/cores/arduino/HardwareSerial_private.h +++ b/cores/arduino/HardwareSerial_private.h @@ -99,7 +99,7 @@ void HardwareSerial::_rx_complete_irq(void) // No Parity error, read byte and store it in the buffer if there is // room unsigned char c = *_udr; - uint8_t i = (unsigned int)(_rx_buffer_head + 1) % SERIAL_BUFFER_SIZE; + uint8_t i = (unsigned int)(_rx_buffer_head + 1) % SERIAL_RX_BUFFER_SIZE; // if we should be storing the received character into the location // just before the tail (meaning that the head would advance to the -- cgit v1.2.3-18-g5258 From 9769bac51b126d534be75676aa8b96fa9233ccca Mon Sep 17 00:00:00 2001 From: Cristian Maglie Date: Tue, 1 Apr 2014 17:18:02 +0200 Subject: Use correct type for index calculation in HardwareSerial --- cores/arduino/HardwareSerial_private.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'cores/arduino') diff --git a/cores/arduino/HardwareSerial_private.h b/cores/arduino/HardwareSerial_private.h index 9e98da6..ea41028 100644 --- a/cores/arduino/HardwareSerial_private.h +++ b/cores/arduino/HardwareSerial_private.h @@ -99,7 +99,7 @@ void HardwareSerial::_rx_complete_irq(void) // No Parity error, read byte and store it in the buffer if there is // room unsigned char c = *_udr; - uint8_t i = (unsigned int)(_rx_buffer_head + 1) % SERIAL_RX_BUFFER_SIZE; + rx_buffer_index_t i = (unsigned int)(_rx_buffer_head + 1) % SERIAL_RX_BUFFER_SIZE; // if we should be storing the received character into the location // just before the tail (meaning that the head would advance to the -- cgit v1.2.3-18-g5258