From 80d6af62730f11f9f23ec7a14d69bc6cfa01dd03 Mon Sep 17 00:00:00 2001 From: Matthijs Kooijman Date: Thu, 18 Apr 2013 11:38:13 +0200 Subject: Move interrupt handlers into HardwareSerial class The actual interrupt vectors are of course defined as before, but they let new methods in the HardwareSerial class do the actual work. This greatly reduces code duplication and prepares for one of my next commits which requires the tx interrupt handler to be called from another context as well. The actual content of the interrupts handlers was pretty much identical, so that remains unchanged (except that store_char was now only needed once, so it was inlined). Now all access to the buffers are inside the HardwareSerial class, the buffer variables can be made private. One would expect a program size reduction from this change (at least with multiple UARTs), but due to the fact that the interrupt handlers now only have indirect access to a few registers (which previously were just hardcoded in the handlers) and because there is some extra function call overhead, the code size on the uno actually increases by around 70 bytes. On the mega, which has four UARTs, the code size decreases by around 70 bytes. --- cores/arduino/HardwareSerial.cpp | 145 ++++++++++++--------------------------- cores/arduino/HardwareSerial.h | 6 +- 2 files changed, 50 insertions(+), 101 deletions(-) (limited to 'cores/arduino') diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp index 59e0f1a..6bbef7a 100644 --- a/cores/arduino/HardwareSerial.cpp +++ b/cores/arduino/HardwareSerial.cpp @@ -84,20 +84,6 @@ #error "Not all bit positions for UART3 are the same as for UART0" #endif -inline void store_char(unsigned char c, HardwareSerial *s) -{ - int i = (unsigned int)(s->_rx_buffer_head + 1) % SERIAL_BUFFER_SIZE; - - // if we should be storing the received character into the location - // just before the tail (meaning that the head would advance to the - // current location of the tail), we're about to overflow the buffer - // and so we don't write the character or advance the head. - if (i != s->_rx_buffer_tail) { - s->_rx_buffer[s->_rx_buffer_head] = c; - s->_rx_buffer_head = i; - } -} - #if !defined(USART0_RX_vect) && defined(USART1_RX_vect) // do nothing - on the 32u4 the first USART is USART1 #else @@ -116,23 +102,7 @@ inline void store_char(unsigned char c, HardwareSerial *s) ISR(USART_RXC_vect) // ATmega8 #endif { - #if defined(UDR0) - if (bit_is_clear(UCSR0A, UPE0)) { - unsigned char c = UDR0; - store_char(c, &Serial); - } else { - unsigned char c = UDR0; - }; - #elif defined(UDR) - if (bit_is_clear(UCSRA, PE)) { - unsigned char c = UDR; - store_char(c, &Serial); - } else { - unsigned char c = UDR; - }; - #else - #error UDR not defined - #endif + Serial._rx_complete_irq(); } #endif #endif @@ -143,12 +113,7 @@ inline void store_char(unsigned char c, HardwareSerial *s) #define serialEvent1_implemented ISR(USART1_RX_vect) { - if (bit_is_clear(UCSR1A, UPE1)) { - unsigned char c = UDR1; - store_char(c, &Serial1); - } else { - unsigned char c = UDR1; - }; + Serial1._rx_complete_irq(); } #endif @@ -158,12 +123,7 @@ inline void store_char(unsigned char c, HardwareSerial *s) #define serialEvent2_implemented ISR(USART2_RX_vect) { - if (bit_is_clear(UCSR2A, UPE2)) { - unsigned char c = UDR2; - store_char(c, &Serial2); - } else { - unsigned char c = UDR2; - }; + Serial2._rx_complete_irq(); } #endif @@ -173,12 +133,7 @@ inline void store_char(unsigned char c, HardwareSerial *s) #define serialEvent3_implemented ISR(USART3_RX_vect) { - if (bit_is_clear(UCSR3A, UPE3)) { - unsigned char c = UDR3; - store_char(c, &Serial3); - } else { - unsigned char c = UDR3; - }; + Serial3._rx_complete_irq(); } #endif @@ -215,27 +170,7 @@ ISR(USART0_UDRE_vect) ISR(USART_UDRE_vect) #endif { - if (Serial._tx_buffer_head == Serial._tx_buffer_tail) { - // Buffer empty, so disable interrupts -#if defined(UCSR0B) - cbi(UCSR0B, UDRIE0); -#else - cbi(UCSRB, UDRIE); -#endif - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = Serial._tx_buffer[Serial._tx_buffer_tail]; - Serial._tx_buffer_tail = (Serial._tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE; - - #if defined(UDR0) - UDR0 = c; - #elif defined(UDR) - UDR = c; - #else - #error UDR not defined - #endif - } + Serial._tx_udr_empty_irq(); } #endif #endif @@ -243,53 +178,63 @@ ISR(USART_UDRE_vect) #ifdef USART1_UDRE_vect ISR(USART1_UDRE_vect) { - if (Serial1._tx_buffer_head == Serial1._tx_buffer_tail) { - // Buffer empty, so disable interrupts - cbi(UCSR1B, UDRIE1); - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = Serial1._tx_buffer[Serial1._tx_buffer_tail]; - Serial1._tx_buffer_tail = (Serial1._tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE; - - UDR1 = c; - } + Serial1._tx_udr_empty_irq(); } #endif #ifdef USART2_UDRE_vect ISR(USART2_UDRE_vect) { - if (Serial2._tx_buffer_head == Serial2._tx_buffer_tail) { - // Buffer empty, so disable interrupts - cbi(UCSR2B, UDRIE2); - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = Serial2._tx_buffer[Serial2._tx_buffer_tail]; - Serial2._tx_buffer_tail = (Serial2._tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE; - - UDR2 = c; - } + Serial2._tx_udr_empty_irq(); } #endif #ifdef USART3_UDRE_vect ISR(USART3_UDRE_vect) { - if (Serial3._tx_buffer_head == Serial3._tx_buffer_tail) { - // Buffer empty, so disable interrupts - cbi(UCSR3B, UDRIE3); + Serial3._tx_udr_empty_irq(); +} +#endif + + +// Actual interrupt handlers ////////////////////////////////////////////////////////////// + +void HardwareSerial::_rx_complete_irq(void) +{ + if (bit_is_clear(*_ucsra, UPE0)) { + // No Parity error, read byte and store it in the buffer if there is + // room + unsigned char c = *_udr; + int i = (unsigned int)(_rx_buffer_head + 1) % SERIAL_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != _rx_buffer_tail) { + _rx_buffer[_rx_buffer_head] = c; + _rx_buffer_head = i; + } + } else { + // Parity error, read byte but discard it + unsigned char c = *_udr; + }; +} + +void HardwareSerial::_tx_udr_empty_irq(void) +{ + if (_tx_buffer_head == _tx_buffer_tail) { + // Buffer empty, so disable interrupts + cbi(*_ucsrb, UDRIE0); } else { // There is more data in the output buffer. Send the next byte - unsigned char c = Serial3._tx_buffer[Serial3._tx_buffer_tail]; - Serial3._tx_buffer_tail = (Serial3._tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE; - - UDR3 = c; + unsigned char c = _tx_buffer[_tx_buffer_tail]; + _tx_buffer_tail = (_tx_buffer_tail + 1) % SERIAL_BUFFER_SIZE; + + *_udr = c; } } -#endif // Constructors //////////////////////////////////////////////////////////////// diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h index 5513226..cf3f6bd 100644 --- a/cores/arduino/HardwareSerial.h +++ b/cores/arduino/HardwareSerial.h @@ -74,7 +74,6 @@ class HardwareSerial : public Stream volatile uint8_t *_udr; bool transmitting; - public: volatile uint8_t _rx_buffer_head; volatile uint8_t _rx_buffer_tail; volatile uint8_t _tx_buffer_head; @@ -86,6 +85,7 @@ class HardwareSerial : public Stream unsigned char _rx_buffer[SERIAL_BUFFER_SIZE]; unsigned char _tx_buffer[SERIAL_BUFFER_SIZE]; + public: HardwareSerial( volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, volatile uint8_t *ucsra, volatile uint8_t *ucsrb, @@ -104,6 +104,10 @@ class HardwareSerial : public Stream inline size_t write(int n) { return write((uint8_t)n); } using Print::write; // pull in write(str) and write(buf, size) from Print operator bool() { return true; } + + // Interrupt handlers - Not intended to be called externally + void _rx_complete_irq(void); + void _tx_udr_empty_irq(void); }; #if defined(UBRRH) || defined(UBRR0H) -- cgit v1.2.3-18-g5258