From 5f3976696ddf5d02ea7e6f805ce655e1f281e6ed Mon Sep 17 00:00:00 2001
From: "David A. Mellis" <d.mellis@arduino.cc>
Date: Sat, 6 Oct 2007 14:47:50 +0000
Subject: Moving hardware/targets to hardware/cores.

---
 cores/arduino/WInterrupts.c | 98 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100755 cores/arduino/WInterrupts.c

(limited to 'cores/arduino/WInterrupts.c')

diff --git a/cores/arduino/WInterrupts.c b/cores/arduino/WInterrupts.c
new file mode 100755
index 0000000..38992ee
--- /dev/null
+++ b/cores/arduino/WInterrupts.c
@@ -0,0 +1,98 @@
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+  Part of the Wiring project - http://wiring.uniandes.edu.co
+
+  Copyright (c) 2004-05 Hernando Barragan
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+  
+  Modified 24 November 2006 by David A. Mellis
+*/
+
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/signal.h>
+#include <avr/pgmspace.h>
+#include <stdio.h>
+
+#include "WConstants.h"
+#include "wiring_private.h"
+
+volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
+// volatile static voidFuncPtr twiIntFunc;
+
+#if defined(__AVR_ATmega168__)
+#define MCUCR EICRA
+#define GICR EIMSK
+#endif
+
+void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
+  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+    intFunc[interruptNum] = userFunc;
+    
+    if (interruptNum == 0) {
+      // Configure the interrupt mode (trigger on low input, any change, rising
+      // edge, or falling edge).  The mode constants were chosen to correspond
+      // to the configuration bits in the hardware register, so we simply shift
+      // the mode into place.
+      MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+      
+      // Enable the interrupt.
+      GICR |= (1 << INT0);
+    } else {
+      MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+      GICR |= (1 << INT1);
+    }
+  }
+}
+
+void detachInterrupt(uint8_t interruptNum) {
+  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+    if (interruptNum == 0)
+      // Disable the interrupt.
+      GICR &= ~(1 << INT0);
+    else
+      GICR &= ~(1 << INT1);
+      
+    intFunc[interruptNum] = 0;
+  }
+}
+
+/*
+void attachInterruptTwi(void (*userFunc)(void) ) {
+  twiIntFunc = userFunc;
+}
+*/
+
+SIGNAL(SIG_INTERRUPT0) {
+  if(intFunc[EXTERNAL_INT_0])
+    intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(SIG_INTERRUPT1) {
+  if(intFunc[EXTERNAL_INT_1])
+    intFunc[EXTERNAL_INT_1]();
+}
+
+/*
+SIGNAL(SIG_2WIRE_SERIAL) {
+  if(twiIntFunc)
+    twiIntFunc();
+}
+*/
+
-- 
cgit v1.2.3-18-g5258