From 5f3976696ddf5d02ea7e6f805ce655e1f281e6ed Mon Sep 17 00:00:00 2001 From: "David A. Mellis" Date: Sat, 6 Oct 2007 14:47:50 +0000 Subject: Moving hardware/targets to hardware/cores. --- cores/arduino/Makefile | 239 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 239 insertions(+) create mode 100755 cores/arduino/Makefile (limited to 'cores/arduino/Makefile') diff --git a/cores/arduino/Makefile b/cores/arduino/Makefile new file mode 100755 index 0000000..98990f8 --- /dev/null +++ b/cores/arduino/Makefile @@ -0,0 +1,239 @@ +# Arduino makefile +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# The Arduino environment does preliminary processing on a sketch before +# compiling it. If you're using this makefile instead, you'll need to do +# a few things differently: +# +# - Give your program's file a .cpp extension (e.g. foo.cpp). +# +# - Put this line at top of your code: #include +# +# - Write prototypes for all your functions (or define them before you +# call them). A prototype declares the types of parameters a +# function will take and what type of value it will return. This +# means that you can have a call to a function before the definition +# of the function. A function prototype looks like the first line of +# the function, with a semi-colon at the end. For example: +# int digitalRead(int pin); +# +# - Write a main() function for your program that returns an int, calls +# init() and setup() once (in that order), and then calls loop() +# repeatedly(): +# +# int main() +# { +# init(); +# setup(); +# +# for (;;) +# loop(); +# +# return 0; +# } +# +# Instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. +# +# 2. Below, modify the line containing "TARGET" to refer to the name of +# of your program's file without an extension (e.g. TARGET = foo). +# +# 3. Modify the line containg "ARDUINO" to point the directory that +# contains the Arduino core (for normal Arduino installations, this +# is the hardware/cores/arduino sub-directory). +# +# 4. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id$ + +PORT = /dev/tty.usbserial* +TARGET = foo +ARDUINO = arduino +SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \ +$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \ +$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \ +$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c +CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WRandom.cpp +MCU = atmega168 +F_CPU = 16000000 +FORMAT = ihex +UPLOAD_RATE = 19200 + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Place -I options here +CINCS = -I$(ARDUINO) +CXXINCS = -I$(ARDUINO) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = -lm + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PROGRAMMER = stk500 +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) + +# Program settings +CC = avr-gcc +CXX = avr-g++ +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +AR = avr-ar +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: build + +build: elf hex + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym + +# Program the device. +upload: $(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: $(TARGET).elf + $(COFFCONVERT) -O coff-avr $(TARGET).elf $(TARGET).cof + + +extcoff: $(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr $(TARGET).elf $(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + +core.a: $(OBJ) + @for i in $(OBJ); do echo $(AR) rcs core.a $$i; $(AR) rcs core.a $$i; done + +# Link: create ELF output file from library. +$(TARGET).elf: core.a + $(CC) $(ALL_CFLAGS) -o $@ $(TARGET).cpp -L. core.a $(LDFLAGS) + +# Compile: create object files from C++ source files. +.cpp.o: + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +# Target: clean project. +clean: + $(REMOVE) $(TARGET).hex $(TARGET).eep $(TARGET).cof $(TARGET).elf \ + $(TARGET).map $(TARGET).sym $(TARGET).lss core.a \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build elf hex eep lss sym program coff extcoff clean depend -- cgit v1.2.3-18-g5258