From 3364c6f736a77e60f26273af0bb021f4507dd1b9 Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 14:44:45 -0500 Subject: Removed USB CDC Serial This will compile but will NOT enumerate properly without a config descriptor. You've been warned... --- cores/arduino/CDC.cpp | 143 -------------------------------------------------- 1 file changed, 143 deletions(-) (limited to 'cores/arduino/CDC.cpp') diff --git a/cores/arduino/CDC.cpp b/cores/arduino/CDC.cpp index 9fea948..a6bce17 100644 --- a/cores/arduino/CDC.cpp +++ b/cores/arduino/CDC.cpp @@ -17,152 +17,9 @@ */ #include "USBAPI.h" -#include -#include #if defined(USBCON) -typedef struct -{ - u32 dwDTERate; - u8 bCharFormat; - u8 bParityType; - u8 bDataBits; - u8 lineState; -} LineInfo; - -static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; -static volatile int32_t breakValue = -1; - -static u8 wdtcsr_save; - -#define WEAK __attribute__ ((weak)) - -extern const CDCDescriptor _cdcInterface PROGMEM; -const CDCDescriptor _cdcInterface = -{ - D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), - - // CDC communication interface - D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), - D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) - D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not) - D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported - D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), - - // CDC data interface - D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), - D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,USB_EP_SIZE,0), - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,USB_EP_SIZE,0) -}; - -bool isLUFAbootloader() -{ - return pgm_read_word(FLASHEND - 1) == NEW_LUFA_SIGNATURE; -} - -int CDC_GetInterface(u8* interfaceNum) -{ - interfaceNum[0] += 2; // uses 2 - return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface)); -} - -bool CDC_Setup(USBSetup& setup) -{ - u8 r = setup.bRequest; - u8 requestType = setup.bmRequestType; - - if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) - { - if (CDC_GET_LINE_CODING == r) - { - USB_SendControl(0,(void*)&_usbLineInfo,7); - return true; - } - } - - if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) - { - if (CDC_SEND_BREAK == r) - { - breakValue = ((uint16_t)setup.wValueH << 8) | setup.wValueL; - } - - if (CDC_SET_LINE_CODING == r) - { - USB_RecvControl((void*)&_usbLineInfo,7); - } - - if (CDC_SET_CONTROL_LINE_STATE == r) - { - _usbLineInfo.lineState = setup.wValueL; - - // auto-reset into the bootloader is triggered when the port, already - // open at 1200 bps, is closed. this is the signal to start the watchdog - // with a relatively long period so it can finish housekeeping tasks - // like servicing endpoints before the sketch ends - - uint16_t magic_key_pos = MAGIC_KEY_POS; - -// If we don't use the new RAMEND directly, check manually if we have a newer bootloader. -// This is used to keep compatible with the old leonardo bootloaders. -// You are still able to set the magic key position manually to RAMEND-1 to save a few bytes for this check. -#if MAGIC_KEY_POS != (RAMEND-1) - // For future boards save the key in the inproblematic RAMEND - // Which is reserved for the main() return value (which will never return) - if (isLUFAbootloader()) { - // horray, we got a new bootloader! - magic_key_pos = (RAMEND-1); - } -#endif - - // We check DTR state to determine if host port is open (bit 0 of lineState). - if (1200 == _usbLineInfo.dwDTERate && (_usbLineInfo.lineState & 0x01) == 0) - { -#if MAGIC_KEY_POS != (RAMEND-1) - // Backup ram value if its not a newer bootloader and it hasn't already been saved. - // This should avoid memory corruption at least a bit, not fully - if (magic_key_pos != (RAMEND-1) && *(uint16_t *)magic_key_pos != MAGIC_KEY) { - *(uint16_t *)(RAMEND-1) = *(uint16_t *)magic_key_pos; - } -#endif - // Store boot key - *(uint16_t *)magic_key_pos = MAGIC_KEY; - // Save the watchdog state in case the reset is aborted. - wdtcsr_save = WDTCSR; - wdt_enable(WDTO_120MS); - } - else if (*(uint16_t *)magic_key_pos == MAGIC_KEY) - { - // Most OSs do some intermediate steps when configuring ports and DTR can - // twiggle more than once before stabilizing. - // To avoid spurious resets we set the watchdog to 120ms and eventually - // cancel if DTR goes back high. - // Cancellation is only done if an auto-reset was started, which is - // indicated by the magic key having been set. - - wdt_reset(); - // Restore the watchdog state in case the sketch was using it. - WDTCSR |= (1<