From 563f69b870a7f71026c50605b531ed40d667b0a2 Mon Sep 17 00:00:00 2001 From: HampusM Date: Mon, 7 Mar 2022 13:48:57 +0100 Subject: rename arduino core dir to xinput --- cores/arduino/Arduino.h | 260 ------------------------------------------------ 1 file changed, 260 deletions(-) delete mode 100644 cores/arduino/Arduino.h (limited to 'cores/arduino/Arduino.h') diff --git a/cores/arduino/Arduino.h b/cores/arduino/Arduino.h deleted file mode 100644 index 91eeb16..0000000 --- a/cores/arduino/Arduino.h +++ /dev/null @@ -1,260 +0,0 @@ -/* - Arduino.h - Main include file for the Arduino SDK - Copyright (c) 2005-2013 Arduino Team. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef Arduino_h -#define Arduino_h - -#include -#include -#include -#include - -#include -#include -#include - -#include "binary.h" - -#ifdef __cplusplus -extern "C"{ -#endif - -void yield(void); - -#define HIGH 0x1 -#define LOW 0x0 - -#define INPUT 0x0 -#define OUTPUT 0x1 -#define INPUT_PULLUP 0x2 - -#define PI 3.1415926535897932384626433832795 -#define HALF_PI 1.5707963267948966192313216916398 -#define TWO_PI 6.283185307179586476925286766559 -#define DEG_TO_RAD 0.017453292519943295769236907684886 -#define RAD_TO_DEG 57.295779513082320876798154814105 -#define EULER 2.718281828459045235360287471352 - -#define SERIAL 0x0 -#define DISPLAY 0x1 - -#define LSBFIRST 0 -#define MSBFIRST 1 - -#define CHANGE 1 -#define FALLING 2 -#define RISING 3 - -#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) - #define DEFAULT 0 - #define EXTERNAL 1 - #define INTERNAL1V1 2 - #define INTERNAL INTERNAL1V1 -#elif defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) - #define DEFAULT 0 - #define EXTERNAL 4 - #define INTERNAL1V1 8 - #define INTERNAL INTERNAL1V1 - #define INTERNAL2V56 9 - #define INTERNAL2V56_EXTCAP 13 -#else -#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644__) || defined(__AVR_ATmega644A__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) -#define INTERNAL1V1 2 -#define INTERNAL2V56 3 -#else -#define INTERNAL 3 -#endif -#define DEFAULT 1 -#define EXTERNAL 0 -#endif - -// undefine stdlib's abs if encountered -#ifdef abs -#undef abs -#endif - -#define min(a,b) ((a)<(b)?(a):(b)) -#define max(a,b) ((a)>(b)?(a):(b)) -#define abs(x) ((x)>0?(x):-(x)) -#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) -#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) -#define radians(deg) ((deg)*DEG_TO_RAD) -#define degrees(rad) ((rad)*RAD_TO_DEG) -#define sq(x) ((x)*(x)) - -#define interrupts() sei() -#define noInterrupts() cli() - -#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) -#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) -#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) - -#define lowByte(w) ((uint8_t) ((w) & 0xff)) -#define highByte(w) ((uint8_t) ((w) >> 8)) - -#define bitRead(value, bit) (((value) >> (bit)) & 0x01) -#define bitSet(value, bit) ((value) |= (1UL << (bit))) -#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) -#define bitToggle(value, bit) ((value) ^= (1UL << (bit))) -#define bitWrite(value, bit, bitvalue) ((bitvalue) ? bitSet(value, bit) : bitClear(value, bit)) - -// avr-libc defines _NOP() since 1.6.2 -#ifndef _NOP -#define _NOP() do { __asm__ volatile ("nop"); } while (0) -#endif - -typedef unsigned int word; - -#define bit(b) (1UL << (b)) - -typedef bool boolean; -typedef uint8_t byte; - -void init(void); -void initVariant(void); - -int atexit(void (*func)()) __attribute__((weak)); - -void pinMode(uint8_t pin, uint8_t mode); -void digitalWrite(uint8_t pin, uint8_t val); -int digitalRead(uint8_t pin); -int analogRead(uint8_t pin); -void analogReference(uint8_t mode); -void analogWrite(uint8_t pin, int val); - -unsigned long millis(void); -unsigned long micros(void); -void delay(unsigned long ms); -void delayMicroseconds(unsigned int us); -unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); -unsigned long pulseInLong(uint8_t pin, uint8_t state, unsigned long timeout); - -void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); -uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); - -void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode); -void detachInterrupt(uint8_t interruptNum); - -void setup(void); -void loop(void); - -// Get the bit location within the hardware port of the given virtual pin. -// This comes from the pins_*.c file for the active board configuration. - -#define analogInPinToBit(P) (P) - -// On the ATmega1280, the addresses of some of the port registers are -// greater than 255, so we can't store them in uint8_t's. -extern const uint16_t PROGMEM port_to_mode_PGM[]; -extern const uint16_t PROGMEM port_to_input_PGM[]; -extern const uint16_t PROGMEM port_to_output_PGM[]; - -extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; -// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; -extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; -extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; - -// Get the bit location within the hardware port of the given virtual pin. -// This comes from the pins_*.c file for the active board configuration. -// -// These perform slightly better as macros compared to inline functions -// -#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) -#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) -#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) -#define analogInPinToBit(P) (P) -#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) ) -#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) ) -#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) ) - -#define NOT_A_PIN 0 -#define NOT_A_PORT 0 - -#define NOT_AN_INTERRUPT -1 - -#ifdef ARDUINO_MAIN -#define PA 1 -#define PB 2 -#define PC 3 -#define PD 4 -#define PE 5 -#define PF 6 -#define PG 7 -#define PH 8 -#define PJ 10 -#define PK 11 -#define PL 12 -#endif - -#define NOT_ON_TIMER 0 -#define TIMER0A 1 -#define TIMER0B 2 -#define TIMER1A 3 -#define TIMER1B 4 -#define TIMER1C 5 -#define TIMER2 6 -#define TIMER2A 7 -#define TIMER2B 8 - -#define TIMER3A 9 -#define TIMER3B 10 -#define TIMER3C 11 -#define TIMER4A 12 -#define TIMER4B 13 -#define TIMER4C 14 -#define TIMER4D 15 -#define TIMER5A 16 -#define TIMER5B 17 -#define TIMER5C 18 - -#ifdef __cplusplus -} // extern "C" -#endif - -#ifdef __cplusplus -#include "WCharacter.h" -#include "WString.h" -#include "HardwareSerial.h" -#include "USBAPI.h" -#if defined(HAVE_HWSERIAL0) && defined(HAVE_CDCSERIAL) -#error "Targets with both UART0 and CDC serial not supported" -#endif - -uint16_t makeWord(uint16_t w); -uint16_t makeWord(byte h, byte l); - -#define word(...) makeWord(__VA_ARGS__) - -unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); -unsigned long pulseInLong(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); - -void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); -void noTone(uint8_t _pin); - -// WMath prototypes -long random(long); -long random(long, long); -void randomSeed(unsigned long); -long map(long, long, long, long, long); - -#endif - -#include "pins_arduino.h" - -#endif -- cgit v1.2.3-18-g5258