From 9e48dfc4fd53a2bc53367568077fbea44f88eda2 Mon Sep 17 00:00:00 2001 From: "David A. Mellis" Date: Sat, 6 Oct 2007 13:04:46 +0000 Subject: Moving libraries out from inside targets and creating bootloaders directory. --- .../Stepper/examples/MotorKnob/MotorKnob.pde | 40 ---------------------- 1 file changed, 40 deletions(-) delete mode 100644 core/libraries/Stepper/examples/MotorKnob/MotorKnob.pde (limited to 'core/libraries/Stepper/examples') diff --git a/core/libraries/Stepper/examples/MotorKnob/MotorKnob.pde b/core/libraries/Stepper/examples/MotorKnob/MotorKnob.pde deleted file mode 100644 index 062cac9..0000000 --- a/core/libraries/Stepper/examples/MotorKnob/MotorKnob.pde +++ /dev/null @@ -1,40 +0,0 @@ -/* - * MotorKnob - * - * A stepper motor follows the turns of a potentiometer - * (or other sensor) on analog input 0. - * - * http://www.arduino.cc/en/Reference/Stepper - */ - -#include - -// change this to the number of steps on your motor -#define STEPS 100 - -// create an instance of the stepper class, specifying -// the number of steps of the motor and the pins it's -// attached to -Stepper stepper(STEPS, 8, 9, 10, 11); - -// the previous reading from the analog input -int previous = 0; - -void setup() -{ - // set the speed of the motor to 30 RPMs - stepper.setSpeed(30); -} - -void loop() -{ - // get the sensor value - int val = analogRead(0); - - // move a number of steps equal to the change in the - // sensor reading - stepper.step(val - previous); - - // remember the previous value of the sensor - previous = val; -} \ No newline at end of file -- cgit v1.2.3-18-g5258