From 179fcdbda432ff33a921a70994087b08b2a79caa Mon Sep 17 00:00:00 2001 From: "David A. Mellis" Date: Sat, 6 Oct 2007 13:02:43 +0000 Subject: Moving things around - creating the hardware directory and sticking all the avr code, etc. in there. --- core/arduino/wiring.c | 196 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 196 insertions(+) create mode 100755 core/arduino/wiring.c (limited to 'core/arduino/wiring.c') diff --git a/core/arduino/wiring.c b/core/arduino/wiring.c new file mode 100755 index 0000000..5dda822 --- /dev/null +++ b/core/arduino/wiring.c @@ -0,0 +1,196 @@ +/* + wiring.c - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#include "wiring_private.h" + +// The number of times timer 0 has overflowed since the program started. +// Must be volatile or gcc will optimize away some uses of it. +volatile unsigned long timer0_overflow_count; + +SIGNAL(SIG_OVERFLOW0) +{ + timer0_overflow_count++; +} + +unsigned long millis() +{ + // timer 0 increments every 64 cycles, and overflows when it reaches + // 256. we would calculate the total number of clock cycles, then + // divide by the number of clock cycles per millisecond, but this + // overflows too often. + //return timer0_overflow_count * 64UL * 256UL / (F_CPU / 1000UL); + + // instead find 1/128th the number of clock cycles and divide by + // 1/128th the number of clock cycles per millisecond + return timer0_overflow_count * 64UL * 2UL / (F_CPU / 128000UL); +} + +void delay(unsigned long ms) +{ + unsigned long start = millis(); + + while (millis() - start < ms) + ; +} + +/* Delay for the given number of microseconds. Assumes a 16 MHz clock. + * Disables interrupts, which will disrupt the millis() function if used + * too frequently. */ +void delayMicroseconds(unsigned int us) +{ + uint8_t oldSREG; + + // calling avrlib's delay_us() function with low values (e.g. 1 or + // 2 microseconds) gives delays longer than desired. + //delay_us(us); + +#if F_CPU >= 16000000L + // for the 16 MHz clock on most Arduino boards + + // for a one-microsecond delay, simply return. the overhead + // of the function call yields a delay of approximately 1 1/8 us. + if (--us == 0) + return; + + // the following loop takes a quarter of a microsecond (4 cycles) + // per iteration, so execute it four times for each microsecond of + // delay requested. + us <<= 2; + + // account for the time taken in the preceeding commands. + us -= 2; +#else + // for the 8 MHz internal clock on the ATmega168 + + // for a one- or two-microsecond delay, simply return. the overhead of + // the function calls takes more than two microseconds. can't just + // subtract two, since us is unsigned; we'd overflow. + if (--us == 0) + return; + if (--us == 0) + return; + + // the following loop takes half of a microsecond (4 cycles) + // per iteration, so execute it twice for each microsecond of + // delay requested. + us <<= 1; + + // partially compensate for the time taken by the preceeding commands. + // we can't subtract any more than this or we'd overflow w/ small delays. + us--; +#endif + + // disable interrupts, otherwise the timer 0 overflow interrupt that + // tracks milliseconds will make us delay longer than we want. + oldSREG = SREG; + cli(); + + // busy wait + __asm__ __volatile__ ( + "1: sbiw %0,1" "\n\t" // 2 cycles + "brne 1b" : "=w" (us) : "0" (us) // 2 cycles + ); + + // reenable interrupts. + SREG = oldSREG; +} + +void init() +{ + // this needs to be called before setup() or some functions won't + // work there + sei(); + + // timer 0 is used for millis() and delay() + timer0_overflow_count = 0; + // on the ATmega168, timer 0 is also used for fast hardware pwm + // (using phase-correct PWM would mean that timer 0 overflowed half as often + // resulting in different millis() behavior on the ATmega8 and ATmega168) +#if defined(__AVR_ATmega168__) + sbi(TCCR0A, WGM01); + sbi(TCCR0A, WGM00); +#endif + // set timer 0 prescale factor to 64 +#if defined(__AVR_ATmega168__) + sbi(TCCR0B, CS01); + sbi(TCCR0B, CS00); +#else + sbi(TCCR0, CS01); + sbi(TCCR0, CS00); +#endif + // enable timer 0 overflow interrupt +#if defined(__AVR_ATmega168__) + sbi(TIMSK0, TOIE0); +#else + sbi(TIMSK, TOIE0); +#endif + + // timers 1 and 2 are used for phase-correct hardware pwm + // this is better for motors as it ensures an even waveform + // note, however, that fast pwm mode can achieve a frequency of up + // 8 MHz (with a 16 MHz clock) at 50% duty cycle + + // set timer 1 prescale factor to 64 + sbi(TCCR1B, CS11); + sbi(TCCR1B, CS10); + // put timer 1 in 8-bit phase correct pwm mode + sbi(TCCR1A, WGM10); + + // set timer 2 prescale factor to 64 +#if defined(__AVR_ATmega168__) + sbi(TCCR2B, CS22); +#else + sbi(TCCR2, CS22); +#endif + // configure timer 2 for phase correct pwm (8-bit) +#if defined(__AVR_ATmega168__) + sbi(TCCR2A, WGM20); +#else + sbi(TCCR2, WGM20); +#endif + + // set a2d reference to AVCC (5 volts) + cbi(ADMUX, REFS1); + sbi(ADMUX, REFS0); + + // set a2d prescale factor to 128 + // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. + // XXX: this will not work properly for other clock speeds, and + // this code should use F_CPU to determine the prescale factor. + sbi(ADCSRA, ADPS2); + sbi(ADCSRA, ADPS1); + sbi(ADCSRA, ADPS0); + + // enable a2d conversions + sbi(ADCSRA, ADEN); + + // the bootloader connects pins 0 and 1 to the USART; disconnect them + // here so they can be used as normal digital i/o; they will be + // reconnected in Serial.begin() +#if defined(__AVR_ATmega168__) + UCSR0B = 0; +#else + UCSRB = 0; +#endif +} \ No newline at end of file -- cgit v1.2.3-18-g5258