From 67f1e949e184491161c91e44bf0393b8b90ab627 Mon Sep 17 00:00:00 2001
From: WestfW <westfw@gmail.com>
Date: Fri, 10 Jun 2011 16:17:13 -0700
Subject: This is a relatively significant edit that brings the Arduino copy of
 optiboot up-to-date with the optiboot source repository as of Jun-2011 (the
 last changes made in the optiboot repository were in Oct-2010)

This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h

These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
    optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
    update optiboot to the point of the latest optiboot project sources.

These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
   optiboot leaves timer1 configured when starting app, breaks PWM on
   pin 9 and 10.  (fixed with a workaround in arduino core.)
   aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
   Support for ATmega8 and mega88.
   Fix fuse settings for mega168 _ISP targets
   Additional new platforms (mega, sanguino)

http://code.google.com/p/optiboot/issues/detail?id=26
   Set R1 to 0  (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
   Fails to build correctly for mega88

After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
(cherry picked from commit e2812ef91cc1489527827dcd14c843f3b3244f36)
---
 bootloaders/optiboot/pin_defs.h | 79 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 bootloaders/optiboot/pin_defs.h

(limited to 'bootloaders/optiboot/pin_defs.h')

diff --git a/bootloaders/optiboot/pin_defs.h b/bootloaders/optiboot/pin_defs.h
new file mode 100644
index 0000000..313e453
--- /dev/null
+++ b/bootloaders/optiboot/pin_defs.h
@@ -0,0 +1,79 @@
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega88) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__)
+/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */ 
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB5
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTD
+#define UART_PIN    PIND
+#define UART_DDR    DDRD
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
+
+#if defined(__AVR_ATmega8__)
+  //Name conversion R.Wiersma
+  #define UCSR0A	UCSRA
+  #define UDR0 		UDR
+  #define UDRE0 	UDRE
+  #define RXC0		RXC
+  #define TIFR1 	TIFR
+  #define WDTCSR	WDTCR
+#endif
+
+/* Luminet support */
+#if defined(__AVR_ATtiny84__)
+/* Red LED is connected to pin PA4 */ 
+#define LED_DDR     DDRA
+#define LED_PORT    PORTA
+#define LED_PIN     PINA
+#define LED         PINA4
+/* Ports for soft UART - left port only for now. TX/RX on PA2/PA3 */
+#ifdef SOFT_UART
+#define UART_PORT   PORTA
+#define UART_PIN    PINA
+#define UART_DDR    DDRA
+#define UART_TX_BIT 2
+#define UART_RX_BIT 3
+#endif
+#endif
+
+/* Sanguino support */
+#if defined(__AVR_ATmega644P__)
+/* Onboard LED is connected to pin PB0 on Sanguino */ 
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB0
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTD
+#define UART_PIN    PIND
+#define UART_DDR    DDRD
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
+
+/* Mega support */
+#if defined(__AVR_ATmega1280__)
+/* Onboard LED is connected to pin PB7 on Arduino Mega */ 
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB7
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTE
+#define UART_PIN    PINE
+#define UART_DDR    DDRE
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
-- 
cgit v1.2.3-18-g5258