From 91e267bcc42442d4e9da09aab30065ad5d44025a Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 12:37:45 -0500 Subject: Remove non-USB boards Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around. --- bootloaders/optiboot/optiboot_atmega8.lst | 604 ------------------------------ 1 file changed, 604 deletions(-) delete mode 100644 bootloaders/optiboot/optiboot_atmega8.lst (limited to 'bootloaders/optiboot/optiboot_atmega8.lst') diff --git a/bootloaders/optiboot/optiboot_atmega8.lst b/bootloaders/optiboot/optiboot_atmega8.lst deleted file mode 100644 index d921895..0000000 --- a/bootloaders/optiboot/optiboot_atmega8.lst +++ /dev/null @@ -1,604 +0,0 @@ - -optiboot_atmega8.elf: file format elf32-avr - -Sections: -Idx Name Size VMA LMA File off Algn - 0 .text 000001e0 00001e00 00001e00 00000054 2**1 - CONTENTS, ALLOC, LOAD, READONLY, CODE - 1 .version 00000002 00001ffe 00001ffe 00000234 2**0 - CONTENTS, READONLY - 2 .debug_aranges 00000028 00000000 00000000 00000236 2**0 - CONTENTS, READONLY, DEBUGGING - 3 .debug_pubnames 0000005f 00000000 00000000 0000025e 2**0 - CONTENTS, READONLY, DEBUGGING - 4 .debug_info 000002a6 00000000 00000000 000002bd 2**0 - CONTENTS, READONLY, DEBUGGING - 5 .debug_abbrev 00000169 00000000 00000000 00000563 2**0 - CONTENTS, READONLY, DEBUGGING - 6 .debug_line 00000498 00000000 00000000 000006cc 2**0 - CONTENTS, READONLY, DEBUGGING - 7 .debug_frame 00000080 00000000 00000000 00000b64 2**2 - CONTENTS, READONLY, DEBUGGING - 8 .debug_str 0000014f 00000000 00000000 00000be4 2**0 - CONTENTS, READONLY, DEBUGGING - 9 .debug_loc 000002ba 00000000 00000000 00000d33 2**0 - CONTENTS, READONLY, DEBUGGING - 10 .debug_ranges 00000078 00000000 00000000 00000fed 2**0 - CONTENTS, READONLY, DEBUGGING - -Disassembly of section .text: - -00001e00
: -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 1e00: 11 24 eor r1, r1 - // - // If not, uncomment the following instructions: - // cli(); - asm volatile ("clr __zero_reg__"); -#ifdef __AVR_ATmega8__ - SP=RAMEND; // This is done by hardware reset - 1e02: 8f e5 ldi r24, 0x5F ; 95 - 1e04: 94 e0 ldi r25, 0x04 ; 4 - 1e06: 9e bf out 0x3e, r25 ; 62 - 1e08: 8d bf out 0x3d, r24 ; 61 -#endif - - // Adaboot no-wait mod - ch = MCUSR; - 1e0a: 84 b7 in r24, 0x34 ; 52 - MCUSR = 0; - 1e0c: 14 be out 0x34, r1 ; 52 - if (!(ch & _BV(EXTRF))) appStart(); - 1e0e: 81 ff sbrs r24, 1 - 1e10: e2 d0 rcall .+452 ; 0x1fd6 - -#if LED_START_FLASHES > 0 - // Set up Timer 1 for timeout counter - TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 - 1e12: 85 e0 ldi r24, 0x05 ; 5 - 1e14: 8e bd out 0x2e, r24 ; 46 -#endif -#ifndef SOFT_UART -#ifdef __AVR_ATmega8__ - UCSRA = _BV(U2X); //Double speed mode USART - 1e16: 82 e0 ldi r24, 0x02 ; 2 - 1e18: 8b b9 out 0x0b, r24 ; 11 - UCSRB = _BV(RXEN) | _BV(TXEN); // enable Rx & Tx - 1e1a: 88 e1 ldi r24, 0x18 ; 24 - 1e1c: 8a b9 out 0x0a, r24 ; 10 - UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0); // config USART; 8N1 - 1e1e: 86 e8 ldi r24, 0x86 ; 134 - 1e20: 80 bd out 0x20, r24 ; 32 - UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); - 1e22: 80 e1 ldi r24, 0x10 ; 16 - 1e24: 89 b9 out 0x09, r24 ; 9 - UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); -#endif -#endif - - // Set up watchdog to trigger after 500ms - watchdogConfig(WATCHDOG_1S); - 1e26: 8e e0 ldi r24, 0x0E ; 14 - 1e28: c2 d0 rcall .+388 ; 0x1fae - - /* Set LED pin as output */ - LED_DDR |= _BV(LED); - 1e2a: bd 9a sbi 0x17, 5 ; 23 - 1e2c: 96 e0 ldi r25, 0x06 ; 6 -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - 1e2e: 20 e3 ldi r18, 0x30 ; 48 - 1e30: 3c ef ldi r19, 0xFC ; 252 - TIFR1 = _BV(TOV1); - 1e32: 54 e0 ldi r21, 0x04 ; 4 - while(!(TIFR1 & _BV(TOV1))); -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); - 1e34: 40 e2 ldi r20, 0x20 ; 32 -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - 1e36: 3d bd out 0x2d, r19 ; 45 - 1e38: 2c bd out 0x2c, r18 ; 44 - TIFR1 = _BV(TOV1); - 1e3a: 58 bf out 0x38, r21 ; 56 - while(!(TIFR1 & _BV(TOV1))); - 1e3c: 08 b6 in r0, 0x38 ; 56 - 1e3e: 02 fe sbrs r0, 2 - 1e40: fd cf rjmp .-6 ; 0x1e3c -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); - 1e42: 88 b3 in r24, 0x18 ; 24 - 1e44: 84 27 eor r24, r20 - 1e46: 88 bb out 0x18, r24 ; 24 -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - 1e48: a8 95 wdr - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); -#endif - watchdogReset(); - } while (--count); - 1e4a: 91 50 subi r25, 0x01 ; 1 - 1e4c: a1 f7 brne .-24 ; 0x1e36 - 1e4e: cc 24 eor r12, r12 - 1e50: dd 24 eor r13, r13 - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - 1e52: 88 24 eor r8, r8 - 1e54: 83 94 inc r8 - addrPtr += 2; - } while (--ch); - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - 1e56: b5 e0 ldi r27, 0x05 ; 5 - 1e58: ab 2e mov r10, r27 - boot_spm_busy_wait(); - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); - 1e5a: a1 e1 ldi r26, 0x11 ; 17 - 1e5c: 9a 2e mov r9, r26 - do *bufPtr++ = getch(); - while (--length); - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 1e5e: f3 e0 ldi r31, 0x03 ; 3 - 1e60: bf 2e mov r11, r31 -#endif - - /* Forever loop */ - for (;;) { - /* get character from UART */ - ch = getch(); - 1e62: 9e d0 rcall .+316 ; 0x1fa0 - - if(ch == STK_GET_PARAMETER) { - 1e64: 81 34 cpi r24, 0x41 ; 65 - 1e66: 61 f4 brne .+24 ; 0x1e80 - unsigned char which = getch(); - 1e68: 9b d0 rcall .+310 ; 0x1fa0 - 1e6a: 08 2f mov r16, r24 - verifySpace(); - 1e6c: a4 d0 rcall .+328 ; 0x1fb6 - if (which == 0x82) { - 1e6e: 02 38 cpi r16, 0x82 ; 130 - 1e70: 11 f0 breq .+4 ; 0x1e76 - /* - * Send optiboot version as "minor SW version" - */ - putch(OPTIBOOT_MINVER); - } else if (which == 0x81) { - 1e72: 01 38 cpi r16, 0x81 ; 129 - 1e74: 11 f4 brne .+4 ; 0x1e7a - putch(OPTIBOOT_MAJVER); - 1e76: 84 e0 ldi r24, 0x04 ; 4 - 1e78: 01 c0 rjmp .+2 ; 0x1e7c - } else { - /* - * GET PARAMETER returns a generic 0x03 reply for - * other parameters - enough to keep Avrdude happy - */ - putch(0x03); - 1e7a: 83 e0 ldi r24, 0x03 ; 3 - 1e7c: 8d d0 rcall .+282 ; 0x1f98 - 1e7e: 89 c0 rjmp .+274 ; 0x1f92 - } - } - else if(ch == STK_SET_DEVICE) { - 1e80: 82 34 cpi r24, 0x42 ; 66 - 1e82: 11 f4 brne .+4 ; 0x1e88 - // SET DEVICE is ignored - getNch(20); - 1e84: 84 e1 ldi r24, 0x14 ; 20 - 1e86: 03 c0 rjmp .+6 ; 0x1e8e - } - else if(ch == STK_SET_DEVICE_EXT) { - 1e88: 85 34 cpi r24, 0x45 ; 69 - 1e8a: 19 f4 brne .+6 ; 0x1e92 - // SET DEVICE EXT is ignored - getNch(5); - 1e8c: 85 e0 ldi r24, 0x05 ; 5 - 1e8e: 9b d0 rcall .+310 ; 0x1fc6 - 1e90: 80 c0 rjmp .+256 ; 0x1f92 - } - else if(ch == STK_LOAD_ADDRESS) { - 1e92: 85 35 cpi r24, 0x55 ; 85 - 1e94: 79 f4 brne .+30 ; 0x1eb4 - // LOAD ADDRESS - uint16_t newAddress; - newAddress = getch(); - 1e96: 84 d0 rcall .+264 ; 0x1fa0 - newAddress = (newAddress & 0xff) | (getch() << 8); - 1e98: e8 2e mov r14, r24 - 1e9a: ff 24 eor r15, r15 - 1e9c: 81 d0 rcall .+258 ; 0x1fa0 - 1e9e: 08 2f mov r16, r24 - 1ea0: 10 e0 ldi r17, 0x00 ; 0 - 1ea2: 10 2f mov r17, r16 - 1ea4: 00 27 eor r16, r16 - 1ea6: 0e 29 or r16, r14 - 1ea8: 1f 29 or r17, r15 -#ifdef RAMPZ - // Transfer top bit to RAMPZ - RAMPZ = (newAddress & 0x8000) ? 1 : 0; -#endif - newAddress += newAddress; // Convert from word address to byte address - 1eaa: 00 0f add r16, r16 - 1eac: 11 1f adc r17, r17 - address = newAddress; - verifySpace(); - 1eae: 83 d0 rcall .+262 ; 0x1fb6 - 1eb0: 68 01 movw r12, r16 - 1eb2: 6f c0 rjmp .+222 ; 0x1f92 - } - else if(ch == STK_UNIVERSAL) { - 1eb4: 86 35 cpi r24, 0x56 ; 86 - 1eb6: 21 f4 brne .+8 ; 0x1ec0 - // UNIVERSAL command is ignored - getNch(4); - 1eb8: 84 e0 ldi r24, 0x04 ; 4 - 1eba: 85 d0 rcall .+266 ; 0x1fc6 - putch(0x00); - 1ebc: 80 e0 ldi r24, 0x00 ; 0 - 1ebe: de cf rjmp .-68 ; 0x1e7c - } - /* Write memory, length is big endian and is in bytes */ - else if(ch == STK_PROG_PAGE) { - 1ec0: 84 36 cpi r24, 0x64 ; 100 - 1ec2: 09 f0 breq .+2 ; 0x1ec6 - 1ec4: 40 c0 rjmp .+128 ; 0x1f46 - // PROGRAM PAGE - we support flash programming only, not EEPROM - uint8_t *bufPtr; - uint16_t addrPtr; - - getch(); /* getlen() */ - 1ec6: 6c d0 rcall .+216 ; 0x1fa0 - length = getch(); - 1ec8: 6b d0 rcall .+214 ; 0x1fa0 - 1eca: 08 2f mov r16, r24 - getch(); - 1ecc: 69 d0 rcall .+210 ; 0x1fa0 - - // If we are in RWW section, immediately start page erase - if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 1ece: 80 e0 ldi r24, 0x00 ; 0 - 1ed0: c8 16 cp r12, r24 - 1ed2: 88 e1 ldi r24, 0x18 ; 24 - 1ed4: d8 06 cpc r13, r24 - 1ed6: 18 f4 brcc .+6 ; 0x1ede - 1ed8: f6 01 movw r30, r12 - 1eda: b7 be out 0x37, r11 ; 55 - 1edc: e8 95 spm - 1ede: c0 e0 ldi r28, 0x00 ; 0 - 1ee0: d1 e0 ldi r29, 0x01 ; 1 - - // While that is going on, read in page contents - bufPtr = buff; - do *bufPtr++ = getch(); - 1ee2: 5e d0 rcall .+188 ; 0x1fa0 - 1ee4: 89 93 st Y+, r24 - while (--length); - 1ee6: 0c 17 cp r16, r28 - 1ee8: e1 f7 brne .-8 ; 0x1ee2 - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 1eea: f0 e0 ldi r31, 0x00 ; 0 - 1eec: cf 16 cp r12, r31 - 1eee: f8 e1 ldi r31, 0x18 ; 24 - 1ef0: df 06 cpc r13, r31 - 1ef2: 18 f0 brcs .+6 ; 0x1efa - 1ef4: f6 01 movw r30, r12 - 1ef6: b7 be out 0x37, r11 ; 55 - 1ef8: e8 95 spm - - // Read command terminator, start reply - verifySpace(); - 1efa: 5d d0 rcall .+186 ; 0x1fb6 - - // If only a partial page is to be programmed, the erase might not be complete. - // So check that here - boot_spm_busy_wait(); - 1efc: 07 b6 in r0, 0x37 ; 55 - 1efe: 00 fc sbrc r0, 0 - 1f00: fd cf rjmp .-6 ; 0x1efc - 1f02: a6 01 movw r20, r12 - 1f04: a0 e0 ldi r26, 0x00 ; 0 - 1f06: b1 e0 ldi r27, 0x01 ; 1 - bufPtr = buff; - addrPtr = (uint16_t)(void*)address; - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - 1f08: 2c 91 ld r18, X - 1f0a: 30 e0 ldi r19, 0x00 ; 0 - a |= (*bufPtr++) << 8; - 1f0c: 11 96 adiw r26, 0x01 ; 1 - 1f0e: 8c 91 ld r24, X - 1f10: 11 97 sbiw r26, 0x01 ; 1 - 1f12: 90 e0 ldi r25, 0x00 ; 0 - 1f14: 98 2f mov r25, r24 - 1f16: 88 27 eor r24, r24 - 1f18: 82 2b or r24, r18 - 1f1a: 93 2b or r25, r19 -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 1f1c: 12 96 adiw r26, 0x02 ; 2 - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - 1f1e: fa 01 movw r30, r20 - 1f20: 0c 01 movw r0, r24 - 1f22: 87 be out 0x37, r8 ; 55 - 1f24: e8 95 spm - 1f26: 11 24 eor r1, r1 - addrPtr += 2; - 1f28: 4e 5f subi r20, 0xFE ; 254 - 1f2a: 5f 4f sbci r21, 0xFF ; 255 - } while (--ch); - 1f2c: f1 e0 ldi r31, 0x01 ; 1 - 1f2e: a0 34 cpi r26, 0x40 ; 64 - 1f30: bf 07 cpc r27, r31 - 1f32: 51 f7 brne .-44 ; 0x1f08 - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - 1f34: f6 01 movw r30, r12 - 1f36: a7 be out 0x37, r10 ; 55 - 1f38: e8 95 spm - boot_spm_busy_wait(); - 1f3a: 07 b6 in r0, 0x37 ; 55 - 1f3c: 00 fc sbrc r0, 0 - 1f3e: fd cf rjmp .-6 ; 0x1f3a - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); - 1f40: 97 be out 0x37, r9 ; 55 - 1f42: e8 95 spm - 1f44: 26 c0 rjmp .+76 ; 0x1f92 -#endif - - } - /* Read memory block mode, length is big endian. */ - else if(ch == STK_READ_PAGE) { - 1f46: 84 37 cpi r24, 0x74 ; 116 - 1f48: b1 f4 brne .+44 ; 0x1f76 - // READ PAGE - we only read flash - getch(); /* getlen() */ - 1f4a: 2a d0 rcall .+84 ; 0x1fa0 - length = getch(); - 1f4c: 29 d0 rcall .+82 ; 0x1fa0 - 1f4e: f8 2e mov r15, r24 - getch(); - 1f50: 27 d0 rcall .+78 ; 0x1fa0 - - verifySpace(); - 1f52: 31 d0 rcall .+98 ; 0x1fb6 - 1f54: f6 01 movw r30, r12 - 1f56: ef 2c mov r14, r15 - putch(result); - address++; - } - while (--length); -#else - do putch(pgm_read_byte_near(address++)); - 1f58: 8f 01 movw r16, r30 - 1f5a: 0f 5f subi r16, 0xFF ; 255 - 1f5c: 1f 4f sbci r17, 0xFF ; 255 - 1f5e: 84 91 lpm r24, Z+ - 1f60: 1b d0 rcall .+54 ; 0x1f98 - while (--length); - 1f62: ea 94 dec r14 - 1f64: f8 01 movw r30, r16 - 1f66: c1 f7 brne .-16 ; 0x1f58 -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 1f68: 08 94 sec - 1f6a: c1 1c adc r12, r1 - 1f6c: d1 1c adc r13, r1 - 1f6e: fa 94 dec r15 - 1f70: cf 0c add r12, r15 - 1f72: d1 1c adc r13, r1 - 1f74: 0e c0 rjmp .+28 ; 0x1f92 -#endif -#endif - } - - /* Get device signature bytes */ - else if(ch == STK_READ_SIGN) { - 1f76: 85 37 cpi r24, 0x75 ; 117 - 1f78: 39 f4 brne .+14 ; 0x1f88 - // READ SIGN - return what Avrdude wants to hear - verifySpace(); - 1f7a: 1d d0 rcall .+58 ; 0x1fb6 - putch(SIGNATURE_0); - 1f7c: 8e e1 ldi r24, 0x1E ; 30 - 1f7e: 0c d0 rcall .+24 ; 0x1f98 - putch(SIGNATURE_1); - 1f80: 83 e9 ldi r24, 0x93 ; 147 - 1f82: 0a d0 rcall .+20 ; 0x1f98 - putch(SIGNATURE_2); - 1f84: 87 e0 ldi r24, 0x07 ; 7 - 1f86: 7a cf rjmp .-268 ; 0x1e7c - } - else if (ch == 'Q') { - 1f88: 81 35 cpi r24, 0x51 ; 81 - 1f8a: 11 f4 brne .+4 ; 0x1f90 - // Adaboot no-wait mod - watchdogConfig(WATCHDOG_16MS); - 1f8c: 88 e0 ldi r24, 0x08 ; 8 - 1f8e: 0f d0 rcall .+30 ; 0x1fae - verifySpace(); - } - else { - // This covers the response to commands like STK_ENTER_PROGMODE - verifySpace(); - 1f90: 12 d0 rcall .+36 ; 0x1fb6 - } - putch(STK_OK); - 1f92: 80 e1 ldi r24, 0x10 ; 16 - 1f94: 01 d0 rcall .+2 ; 0x1f98 - 1f96: 65 cf rjmp .-310 ; 0x1e62 - -00001f98 : - } -} - -void putch(char ch) { -#ifndef SOFT_UART - while (!(UCSR0A & _BV(UDRE0))); - 1f98: 5d 9b sbis 0x0b, 5 ; 11 - 1f9a: fe cf rjmp .-4 ; 0x1f98 - UDR0 = ch; - 1f9c: 8c b9 out 0x0c, r24 ; 12 - [uartBit] "I" (UART_TX_BIT) - : - "r25" - ); -#endif -} - 1f9e: 08 95 ret - -00001fa0 : - [uartBit] "I" (UART_RX_BIT) - : - "r25" -); -#else - while(!(UCSR0A & _BV(RXC0))) - 1fa0: 5f 9b sbis 0x0b, 7 ; 11 - 1fa2: fe cf rjmp .-4 ; 0x1fa0 - ; - if (!(UCSR0A & _BV(FE0))) { - 1fa4: 5c 99 sbic 0x0b, 4 ; 11 - 1fa6: 01 c0 rjmp .+2 ; 0x1faa -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - 1fa8: a8 95 wdr - * don't care that an invalid char is returned...) - */ - watchdogReset(); - } - - ch = UDR0; - 1faa: 8c b1 in r24, 0x0c ; 12 - LED_PIN |= _BV(LED); -#endif -#endif - - return ch; -} - 1fac: 08 95 ret - -00001fae : - "wdr\n" - ); -} - -void watchdogConfig(uint8_t x) { - WDTCSR = _BV(WDCE) | _BV(WDE); - 1fae: 98 e1 ldi r25, 0x18 ; 24 - 1fb0: 91 bd out 0x21, r25 ; 33 - WDTCSR = x; - 1fb2: 81 bd out 0x21, r24 ; 33 -} - 1fb4: 08 95 ret - -00001fb6 : - do getch(); while (--count); - verifySpace(); -} - -void verifySpace() { - if (getch() != CRC_EOP) { - 1fb6: f4 df rcall .-24 ; 0x1fa0 - 1fb8: 80 32 cpi r24, 0x20 ; 32 - 1fba: 19 f0 breq .+6 ; 0x1fc2 - watchdogConfig(WATCHDOG_16MS); // shorten WD timeout - 1fbc: 88 e0 ldi r24, 0x08 ; 8 - 1fbe: f7 df rcall .-18 ; 0x1fae - 1fc0: ff cf rjmp .-2 ; 0x1fc0 - while (1) // and busy-loop so that WD causes - ; // a reset and app start. - } - putch(STK_INSYNC); - 1fc2: 84 e1 ldi r24, 0x14 ; 20 -} - 1fc4: e9 cf rjmp .-46 ; 0x1f98 - -00001fc6 : - ::[count] "M" (UART_B_VALUE) - ); -} -#endif - -void getNch(uint8_t count) { - 1fc6: 1f 93 push r17 - 1fc8: 18 2f mov r17, r24 - do getch(); while (--count); - 1fca: ea df rcall .-44 ; 0x1fa0 - 1fcc: 11 50 subi r17, 0x01 ; 1 - 1fce: e9 f7 brne .-6 ; 0x1fca - verifySpace(); - 1fd0: f2 df rcall .-28 ; 0x1fb6 -} - 1fd2: 1f 91 pop r17 - 1fd4: 08 95 ret - -00001fd6 : - WDTCSR = _BV(WDCE) | _BV(WDE); - WDTCSR = x; -} - -void appStart() { - watchdogConfig(WATCHDOG_OFF); - 1fd6: 80 e0 ldi r24, 0x00 ; 0 - 1fd8: ea df rcall .-44 ; 0x1fae - __asm__ __volatile__ ( - 1fda: ee 27 eor r30, r30 - 1fdc: ff 27 eor r31, r31 - 1fde: 09 94 ijmp -- cgit v1.2.3-18-g5258