From 91e267bcc42442d4e9da09aab30065ad5d44025a Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 12:37:45 -0500 Subject: Remove non-USB boards Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around. --- bootloaders/gemma/README.md | 14 - bootloaders/gemma/avrdude.conf | 14389 ------------------------------------ bootloaders/gemma/gemma_v1.hex | 182 - bootloaders/gemma/usbconfig.h | 351 - bootloaders/gemma/usbconfig.patch | 24 - 5 files changed, 14960 deletions(-) delete mode 100644 bootloaders/gemma/README.md delete mode 100644 bootloaders/gemma/avrdude.conf delete mode 100644 bootloaders/gemma/gemma_v1.hex delete mode 100644 bootloaders/gemma/usbconfig.h delete mode 100644 bootloaders/gemma/usbconfig.patch (limited to 'bootloaders/gemma') diff --git a/bootloaders/gemma/README.md b/bootloaders/gemma/README.md deleted file mode 100644 index 2653e48..0000000 --- a/bootloaders/gemma/README.md +++ /dev/null @@ -1,14 +0,0 @@ -Arduino Gemma Bootloader -======================== - -The Arduino Gemma Bootloader is based on the Adafruit Trinket/Gemma Bootloader. In the Arduino Gemma bootloader the USB VID&PID, the Manufacturer name and the Device name parameters are changed. - -The source code of the bootloader of the version used at the compile time can be found at the following link: https://github.com/adafruit/Adafruit-Trinket-Gemma-Bootloader/tree/3bc1bb561273535d4d493518a233a3a1fccf6b76 - -The *'usbconfig.h'* and the *'usbconfig.patch'* files are provided if you want to recompile the bootloader. -You only need to replace the original *'usbconfig.h'* file with this one or patch it with the provided patch file. - -**Please note: you cannot use the Arduino USB VID/PID for your own non-Gemma products or projects. Purchase a USB VID for yourself at** http://www.usb.org/developers/vendor/ - - - diff --git a/bootloaders/gemma/avrdude.conf b/bootloaders/gemma/avrdude.conf deleted file mode 100644 index 2e1aebb..0000000 --- a/bootloaders/gemma/avrdude.conf +++ /dev/null @@ -1,14389 +0,0 @@ -# AVRDUDE Configuration File -# -# This file contains configuration data used by AVRDUDE which describes -# the programming hardware pinouts and also provides part definitions. -# AVRDUDE's "-C" command line option specifies the location of the -# configuration file. The "-c" option names the programmer configuration -# which must match one of the entry's "id" parameter. The "-p" option -# identifies which part AVRDUDE is going to be programming and must match -# one of the parts' "id" parameter. -# -# Possible entry formats are: -# -# programmer -# parent # optional parent -# id = [, [, ] ...] ; # are quoted strings -# desc = ; # quoted string -# type = ; # programmer type, quoted string -# # supported programmer types can be listed by "-c ?type" -# connection_type = parallel | serial | usb -# baudrate = ; # baudrate for avr910-programmer -# vcc = [, ... ] ; # pin number(s) -# buff = [, ... ] ; # pin number(s) -# reset = ; # pin number -# sck = ; # pin number -# mosi = ; # pin number -# miso = ; # pin number -# errled = ; # pin number -# rdyled = ; # pin number -# pgmled = ; # pin number -# vfyled = ; # pin number -# usbvid = ; # USB VID (Vendor ID) -# usbpid = ; # USB PID (Product ID) -# usbdev = ; # USB interface or other device info -# usbvendor = ; # USB Vendor Name -# usbproduct = ; # USB Product Name -# usbsn = ; # USB Serial Number -# -# To invert a bit, use = ~ , the spaces are important. -# For a pin list all pins must be inverted. -# A single pin can be specified as usual = ~ , for lists -# specify it as follows = ~ ( [, ... ] ) . -# ; -# -# part -# id = ; # quoted string -# desc = ; # quoted string -# has_jtag = ; # part has JTAG i/f -# has_debugwire = ; # part has debugWire i/f -# has_pdi = ; # part has PDI i/f -# has_tpi = ; # part has TPI i/f -# devicecode = ; # deprecated, use stk500_devcode -# stk500_devcode = ; # numeric -# avr910_devcode = ; # numeric -# signature = ; # signature bytes -# chip_erase_delay = ; # micro-seconds -# reset = dedicated | io; -# retry_pulse = reset | sck; -# pgm_enable = ; -# chip_erase = ; -# chip_erase_delay = ; # chip erase delay (us) -# # STK500 parameters (parallel programming IO lines) -# pagel = ; # pin name in hex, i.e., 0xD7 -# bs2 = ; # pin name in hex, i.e., 0xA0 -# serial = ; # can use serial downloading -# parallel = ; # can use par. programming -# # STK500v2 parameters, to be taken from Atmel's XML files -# timeout = ; -# stabdelay = ; -# cmdexedelay = ; -# synchloops = ; -# bytedelay = ; -# pollvalue = ; -# pollindex = ; -# predelay = ; -# postdelay = ; -# pollmethod = ; -# mode = ; -# delay = ; -# blocksize = ; -# readsize = ; -# hvspcmdexedelay = ; -# # STK500v2 HV programming parameters, from XML -# pp_controlstack = , , ...; # PP only -# hvsp_controlstack = , , ...; # HVSP only -# hventerstabdelay = ; -# progmodedelay = ; # PP only -# latchcycles = ; -# togglevtg = ; -# poweroffdelay = ; -# resetdelayms = ; -# resetdelayus = ; -# hvleavestabdelay = ; -# resetdelay = ; -# synchcycles = ; # HVSP only -# chiperasepulsewidth = ; # PP only -# chiperasepolltimeout = ; -# chiperasetime = ; # HVSP only -# programfusepulsewidth = ; # PP only -# programfusepolltimeout = ; -# programlockpulsewidth = ; # PP only -# programlockpolltimeout = ; -# # JTAG ICE mkII parameters, also from XML files -# allowfullpagebitstream = ; -# enablepageprogramming = ; -# idr = ; # IO addr of IDR (OCD) reg. -# rampz = ; # IO addr of RAMPZ reg. -# spmcr = ; # mem addr of SPMC[S]R reg. -# eecr = ; # mem addr of EECR reg. -# # (only when != 0x3c) -# is_at90s1200 = ; # AT90S1200 part -# is_avr32 = ; # AVR32 part -# -# memory -# paged = ; # yes / no -# size = ; # bytes -# page_size = ; # bytes -# num_pages = ; # numeric -# min_write_delay = ; # micro-seconds -# max_write_delay = ; # micro-seconds -# readback_p1 = ; # byte value -# readback_p2 = ; # byte value -# pwroff_after_write = ; # yes / no -# read = ; -# write = ; -# read_lo = ; -# read_hi = ; -# write_lo = ; -# write_hi = ; -# loadpage_lo = ; -# loadpage_hi = ; -# writepage = ; -# ; -# ; -# -# If any of the above parameters are not specified, the default value -# of 0 is used for numerics or the empty string ("") for string -# values. If a required parameter is left empty, AVRDUDE will -# complain. -# -# Parts can also inherit parameters from previously defined parts -# using the following syntax. In this case specified integer and -# string values override parameter values from the parent part. New -# memory definitions are added to the definitions inherited from the -# parent. -# -# part parent # quoted string -# id = ; # quoted string -# -# ; -# -# NOTES: -# * 'devicecode' is the device code used by the STK500 (see codes -# listed below) -# * Not all memory types will implement all instructions. -# * AVR Fuse bits and Lock bits are implemented as a type of memory. -# * Example memory types are: -# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high -# fuse), "signature", "calibration", "lock" -# * The memory type specified on the avrdude command line must match -# one of the memory types defined for the specified chip. -# * The pwroff_after_write flag causes avrdude to attempt to -# power the device off and back on after an unsuccessful write to -# the affected memory area if VCC programmer pins are defined. If -# VCC pins are not defined for the programmer, a message -# indicating that the device needs a power-cycle is printed out. -# This flag was added to work around a problem with the -# at90s4433/2333's; see the at90s4433 errata at: -# -# http://www.atmel.com/dyn/resources/prod_documents/doc1280.pdf -# -# INSTRUCTION FORMATS -# -# Instruction formats are specified as a comma seperated list of -# string values containing information (bit specifiers) about each -# of the 32 bits of the instruction. Bit specifiers may be one of -# the following formats: -# -# '1' = the bit is always set on input as well as output -# -# '0' = the bit is always clear on input as well as output -# -# 'x' = the bit is ignored on input and output -# -# 'a' = the bit is an address bit, the bit-number matches this bit -# specifier's position within the current instruction byte -# -# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 -# is address bit 12 on input, a0 is address bit 0. -# -# 'i' = the bit is an input data bit -# -# 'o' = the bit is an output data bit -# -# Each instruction must be composed of 32 bit specifiers. The -# instruction specification closely follows the instruction data -# provided in Atmel's data sheets for their parts. -# -# See below for some examples. -# -# -# The following are STK500 part device codes to use for the -# "devicecode" field of the part. These came from Atmel's software -# section avr061.zip which accompanies the application note -# AVR061 available from: -# -# http://www.atmel.com/dyn/resources/prod_documents/doc2525.pdf -# - -#define ATTINY10 0x10 /* the _old_ one that never existed! */ -#define ATTINY11 0x11 -#define ATTINY12 0x12 -#define ATTINY15 0x13 -#define ATTINY13 0x14 - -#define ATTINY22 0x20 -#define ATTINY26 0x21 -#define ATTINY28 0x22 -#define ATTINY2313 0x23 - -#define AT90S1200 0x33 - -#define AT90S2313 0x40 -#define AT90S2323 0x41 -#define AT90S2333 0x42 -#define AT90S2343 0x43 - -#define AT90S4414 0x50 -#define AT90S4433 0x51 -#define AT90S4434 0x52 -#define ATMEGA48 0x59 - -#define AT90S8515 0x60 -#define AT90S8535 0x61 -#define AT90C8534 0x62 -#define ATMEGA8515 0x63 -#define ATMEGA8535 0x64 - -#define ATMEGA8 0x70 -#define ATMEGA88 0x73 -#define ATMEGA168 0x86 - -#define ATMEGA161 0x80 -#define ATMEGA163 0x81 -#define ATMEGA16 0x82 -#define ATMEGA162 0x83 -#define ATMEGA169 0x84 - -#define ATMEGA323 0x90 -#define ATMEGA32 0x91 - -#define ATMEGA64 0xA0 - -#define ATMEGA103 0xB1 -#define ATMEGA128 0xB2 -#define AT90CAN128 0xB3 -#define AT90CAN64 0xB3 -#define AT90CAN32 0xB3 - -#define AT86RF401 0xD0 - -#define AT89START 0xE0 -#define AT89S51 0xE0 -#define AT89S52 0xE1 - -# The following table lists the devices in the original AVR910 -# appnote: -# |Device |Signature | Code | -# +-------+----------+------+ -# |tiny12 | 1E 90 05 | 0x55 | -# |tiny15 | 1E 90 06 | 0x56 | -# | | | | -# | S1200 | 1E 90 01 | 0x13 | -# | | | | -# | S2313 | 1E 91 01 | 0x20 | -# | S2323 | 1E 91 02 | 0x48 | -# | S2333 | 1E 91 05 | 0x34 | -# | S2343 | 1E 91 03 | 0x4C | -# | | | | -# | S4414 | 1E 92 01 | 0x28 | -# | S4433 | 1E 92 03 | 0x30 | -# | S4434 | 1E 92 02 | 0x6C | -# | | | | -# | S8515 | 1E 93 01 | 0x38 | -# | S8535 | 1E 93 03 | 0x68 | -# | | | | -# |mega32 | 1E 95 01 | 0x72 | -# |mega83 | 1E 93 05 | 0x65 | -# |mega103| 1E 97 01 | 0x41 | -# |mega161| 1E 94 01 | 0x60 | -# |mega163| 1E 94 02 | 0x64 | - -# Appnote AVR109 also has a table of AVR910 device codes, which -# lists: -# dev avr910 signature -# ATmega8 0x77 0x1E 0x93 0x07 -# ATmega8515 0x3B 0x1E 0x93 0x06 -# ATmega8535 0x6A 0x1E 0x93 0x08 -# ATmega16 0x75 0x1E 0x94 0x03 -# ATmega162 0x63 0x1E 0x94 0x04 -# ATmega163 0x66 0x1E 0x94 0x02 -# ATmega169 0x79 0x1E 0x94 0x05 -# ATmega32 0x7F 0x1E 0x95 0x02 -# ATmega323 0x73 0x1E 0x95 0x01 -# ATmega64 0x46 0x1E 0x96 0x02 -# ATmega128 0x44 0x1E 0x97 0x02 -# -# These codes refer to "BOOT" device codes which are apparently -# different than standard device codes, for whatever reasons -# (often one above the standard code). - -# There are several extended versions of AVR910 implementations around -# in the Internet. These add the following codes (only devices that -# actually exist are listed): - -# ATmega8515 0x3A -# ATmega128 0x43 -# ATmega64 0x45 -# ATtiny26 0x5E -# ATmega8535 0x69 -# ATmega32 0x72 -# ATmega16 0x74 -# ATmega8 0x76 -# ATmega169 0x78 - -# -# Overall avrdude defaults; suitable for ~/.avrduderc -# -default_parallel = "/dev/parport0"; -default_serial = "/dev/ttyS0"; -# default_bitclock = 2.5; - -# Turn off safemode by default -#default_safemode = no; - - -# -# PROGRAMMER DEFINITIONS -# - -# http://wiring.org.co/ -# Basically STK500v2 protocol, with some glue to trigger the -# bootloader. -programmer - id = "wiring"; - desc = "Wiring"; - type = "wiring"; - connection_type = serial; -; - -programmer - id = "arduino"; - desc = "Arduino"; - type = "arduino"; - connection_type = serial; -; -# this will interface with the chips on these programmers: -# -# http://real.kiev.ua/old/avreal/en/adapters -# http://www.amontec.com/jtagkey.shtml, jtagkey-tiny.shtml -# http://www.olimex.com/dev/arm-usb-ocd.html, arm-usb-tiny.html -# http://www.ethernut.de/en/hardware/turtelizer/index.html -# http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html -# http://dangerousprototypes.com/docs/FT2232_breakout_board -# http://www.ftdichip.com/Products/Modules/DLPModules.htm,DLP-2232*,DLP-USB1232H -# http://flashrom.org/FT2232SPI_Programmer -# -# The drivers will look for a specific device and use the first one found. -# If you have mulitple devices, then look for unique information (like SN) -# And fill that in here. -# -# Note that the pin numbers for the main ISP signals (reset, sck, -# mosi, miso) are fixed and cannot be changed, since they must match -# the way the Multi-Protocol Synchronous Serial Engine (MPSSE) of -# these FTDI ICs has been designed. - -programmer - id = "avrftdi"; - desc = "FT2232D based generic programmer"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; - usbpid = 0x6010; - usbvendor = ""; - usbproduct = ""; - usbdev = "A"; - usbsn = ""; -#ISP-signals - lower ADBUS-Nibble (default) - reset = 3; - sck = 0; - mosi = 1; - miso = 2; -#LED SIGNALs - higher ADBUS-Nibble -# errled = 4; -# rdyled = 5; -# pgmled = 6; -# vfyled = 7; -#Buffer Signal - ACBUS - Nibble -# buff = 8; -; -# This is an implementation of the above with a buffer IC (74AC244) and -# 4 LEDs directly attached, all active low. -programmer - id = "2232HIO"; - desc = "FT2232H based generic programmer"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; -# Note: This PID is reserved for generic H devices and -# should be programmed into the EEPROM -# usbpid = 0x8A48; - usbpid = 0x6010; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; -#ISP-signals - reset = 3; - sck = 0; - mosi = 1; - miso = 2; - buff = ~4; -#LED SIGNALs - errled = ~ 11; - rdyled = ~ 14; - pgmled = ~ 13; - vfyled = ~ 12; -; - -#The FT4232H can be treated as FT2232H, but it has a different USB -#device ID of 0x6011. -programmer parent "avrftdi" - id = "4232h"; - desc = "FT4232H based generic programmer"; - usbpid = 0x6011; -; - -programmer - id = "jtagkey"; - desc = "Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; -# Note: This PID is used in all JTAGKey variants - usbpid = 0xCFF8; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; -#ISP-signals => 20 - Pin connector on JTAGKey - reset = 3; # TMS 7 violet - sck = 0; # TCK 9 white - mosi = 1; # TDI 5 green - miso = 2; # TDO 13 orange - buff = ~4; -# VTG VREF 1 brown with red tip -# GND GND 20 black -# The colors are on the 20 pin breakout cable -# from Amontec -; - -# On the adapter you can read "O-Link". On the PCB is printed "OpenJTAG v3.1" -# You can find it as "OpenJTAG ARM JTAG USB" in the internet. -# (But there are also several projects called Open JTAG, eg. -# http://www.openjtag.org, which are completely different.) -# http://www.100ask.net/shop/english.html (website seems to be outdated) -# http://item.taobao.com/item.htm?id=1559277013 -# http://www.micro4you.com/store/openjtag-arm-jtag-usb.html (schematics!) -# some other sources which call it O-Link -# http://www.andahammer.com/olink/ -# http://www.developmentboard.net/31-o-link-debugger.html -# http://armwerks.com/catalog/o-link-debugger-copy/ -# or just have a look at ebay ... -# It is basically the same entry as jtagkey with different usb ids. -programmer parent "jtagkey" - id = "o-link"; - desc = "O-Link, OpenJTAG from www.100ask.net"; - usbvid = 0x1457; - usbpid = 0x5118; - usbvendor = "www.100ask.net"; - usbproduct = "USB<=>JTAG&RS232"; -; - -# http://wiki.openmoko.org/wiki/Debug_Board_v3 -programmer - id = "openmoko"; - desc = "Openmoko debug board (v3)"; - type = "avrftdi"; - usbvid = 0x1457; - usbpid = 0x5118; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; - reset = 3; # TMS 7 - sck = 0; # TCK 9 - mosi = 1; # TDI 5 - miso = 2; # TDO 13 -; - -# Only Rev. A boards. -# Schematic and user manual: http://www.cs.put.poznan.pl/wswitala/download/pdf/811EVBK.pdf -programmer - id = "lm3s811"; - desc = "Luminary Micro LM3S811 Eval Board (Rev. A)"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; - usbpid = 0xbcd9; - usbvendor = "LMI"; - usbproduct = "LM3S811 Evaluation Board"; - usbdev = "A"; - usbsn = ""; -#ISP-signals - lower ACBUS-Nibble (default) - reset = 3; - sck = 0; - mosi = 1; - miso = 2; -# Enable correct buffers - buff = 7; -; - -programmer - id = "avrisp"; - desc = "Atmel AVR ISP"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "avrispv2"; - desc = "Atmel AVR ISP V2"; - type = "stk500v2"; - connection_type = serial; -; - -programmer - id = "avrispmkII"; - desc = "Atmel AVR ISP mkII"; - type = "stk500v2"; - connection_type = usb; -; - -programmer parent "avrispmkII" - id = "avrisp2"; -; - -programmer - id = "buspirate"; - desc = "The Bus Pirate"; - type = "buspirate"; - connection_type = serial; -; - -programmer - id = "buspirate_bb"; - desc = "The Bus Pirate (bitbang interface, supports TPI)"; - type = "buspirate_bb"; - connection_type = serial; - # pins are bits in bitbang byte (numbers are 87654321) - # 1|POWER|PULLUP|AUX|MOSI|CLK|MISO|CS - reset = 1; - sck = 3; - mosi = 4; - miso = 2; - #vcc = 7; This is internally set independent of this setting. -; - -# This is supposed to be the "default" STK500 entry. -# Attempts to select the correct firmware version -# by probing for it. Better use one of the entries -# below instead. -programmer - id = "stk500"; - desc = "Atmel STK500"; - type = "stk500generic"; - connection_type = serial; -; - -programmer - id = "stk500v1"; - desc = "Atmel STK500 Version 1.x firmware"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "mib510"; - desc = "Crossbow MIB510 programming board"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "stk500v2"; - desc = "Atmel STK500 Version 2.x firmware"; - type = "stk500v2"; - connection_type = serial; -; - -programmer - id = "stk500pp"; - desc = "Atmel STK500 V2 in parallel programming mode"; - type = "stk500pp"; - connection_type = serial; -; - -programmer - id = "stk500hvsp"; - desc = "Atmel STK500 V2 in high-voltage serial programming mode"; - type = "stk500hvsp"; - connection_type = serial; -; - -programmer - id = "stk600"; - desc = "Atmel STK600"; - type = "stk600"; - connection_type = usb; -; - -programmer - id = "stk600pp"; - desc = "Atmel STK600 in parallel programming mode"; - type = "stk600pp"; - connection_type = usb; -; - -programmer - id = "stk600hvsp"; - desc = "Atmel STK600 in high-voltage serial programming mode"; - type = "stk600hvsp"; - connection_type = usb; -; - -programmer - id = "avr910"; - desc = "Atmel Low Cost Serial Programmer"; - type = "avr910"; - connection_type = serial; -; - -programmer - id = "ft245r"; - desc = "FT245R Synchronous BitBang"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 1; # D1 - sck = 0; # D0 - mosi = 2; # D2 - reset = 4; # D4 -; - -programmer - id = "ft232r"; - desc = "FT232R Synchronous BitBang"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 1; # RxD - sck = 0; # RTS - mosi = 2; # TxD - reset = 4; # DTR -; - -# see http://www.bitwizard.nl/wiki/index.php/FTDI_ATmega -programmer - id = "bwmega"; - desc = "BitWizard ftdi_atmega builtin programmer"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 5; # DSR - sck = 6; # DCD - mosi = 3; # CTS - reset = 7; # RI -; - -# see http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html -# Note: pins are numbered from 1! -programmer - id = "arduino-ft232r"; - desc = "Arduino: FT232R connected to ISP"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 3; # CTS X3(1) - sck = 5; # DSR X3(2) - mosi = 6; # DCD X3(3) - reset = 7; # RI X3(4) -; - -# website mentioned above uses this id -programmer parent "arduino-ft232r" - id = "diecimila"; - desc = "alias for arduino-ft232r"; -; - -programmer - id = "usbasp"; - desc = "USBasp, http://www.fischl.de/usbasp/"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x05DC; # Obdev's free shared PID - usbvendor = "www.fischl.de"; - usbproduct = "USBasp"; - - # following variants are autodetected for id "usbasp" - - # original usbasp from fischl.de - # see above "usbasp" - - # old usbasp from fischl.de - #usbvid = 0x03EB; # ATMEL - #usbpid = 0xC7B4; # (unoffical) USBasp - #usbvendor = "www.fischl.de"; - #usbproduct = "USBasp"; - - # NIBObee (only if -P nibobee is given on command line) - # see below "nibobee" -; - -programmer - id = "nibobee"; - desc = "NIBObee"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x092F; # NIBObee PID - usbvendor = "www.nicai-systems.com"; - usbproduct = "NIBObee"; -; - -programmer - id = "usbasp-clone"; - desc = "Any usbasp clone with correct VID/PID"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x05DC; # Obdev's free shared PID - #usbvendor = ""; - #usbproduct = ""; -; - -programmer - id = "usbtiny"; - desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; - type = "usbtiny"; - connection_type = usb; - usbvid = 0x1781; - usbpid = 0x0c9f; -; - -programmer - id = "arduinogemma"; - desc = "Arduino Gemma. Based on USBtiny"; - type = "usbtiny"; - connection_type = usb; - usbvid = 0x2341; - usbpid = 0x0c9f; -; - -programmer - id = "arduinoisp"; - desc = " "; - type = "usbtiny"; - connection_type = usb; - usbvid = 0x2341; - usbpid = 0x0049; -; - -programmer - id = "butterfly"; - desc = "Atmel Butterfly Development Board"; - type = "butterfly"; - connection_type = serial; -; - -programmer - id = "avr109"; - desc = "Atmel AppNote AVR109 Boot Loader"; - type = "butterfly"; - connection_type = serial; -; - -programmer - id = "avr911"; - desc = "Atmel AppNote AVR911 AVROSP"; - type = "butterfly"; - connection_type = serial; -; - -# suggested in http://forum.mikrokopter.de/topic-post48317.html -programmer - id = "mkbutterfly"; - desc = "Mikrokopter.de Butterfly"; - type = "butterfly_mk"; - connection_type = serial; -; - -programmer parent "mkbutterfly" - id = "butterfly_mk"; -; - -programmer - id = "jtagmkI"; - desc = "Atmel JTAG ICE (mkI)"; - baudrate = 115200; # default is 115200 - type = "jtagmki"; - connection_type = serial; -; - -# easier to type -programmer parent "jtagmkI" - id = "jtag1"; -; - -# easier to type -programmer parent "jtag1" - id = "jtag1slow"; - baudrate = 19200; -; - -# The JTAG ICE mkII has both, serial and USB connectivity. As it is -# mostly used through USB these days (AVR Studio 5 only supporting it -# that way), we make connection_type = usb the default. Users are -# still free to use a serial port with the -P option. - -programmer - id = "jtagmkII"; - desc = "Atmel JTAG ICE mkII"; - baudrate = 19200; # default is 19200 - type = "jtagmkii"; - connection_type = usb; -; - -# easier to type -programmer parent "jtagmkII" - id = "jtag2slow"; -; - -# JTAG ICE mkII @ 115200 Bd -programmer parent "jtag2slow" - id = "jtag2fast"; - baudrate = 115200; -; - -# make the fast one the default, people will love that -programmer parent "jtag2fast" - id = "jtag2"; -; - -# JTAG ICE mkII in ISP mode -programmer - id = "jtag2isp"; - desc = "Atmel JTAG ICE mkII in ISP mode"; - baudrate = 115200; - type = "jtagmkii_isp"; - connection_type = usb; -; - -# JTAG ICE mkII in debugWire mode -programmer - id = "jtag2dw"; - desc = "Atmel JTAG ICE mkII in debugWire mode"; - baudrate = 115200; - type = "jtagmkii_dw"; - connection_type = usb; -; - -# JTAG ICE mkII in AVR32 mode -programmer - id = "jtagmkII_avr32"; - desc = "Atmel JTAG ICE mkII im AVR32 mode"; - baudrate = 115200; - type = "jtagmkii_avr32"; - connection_type = usb; -; - -# JTAG ICE mkII in AVR32 mode -programmer - id = "jtag2avr32"; - desc = "Atmel JTAG ICE mkII im AVR32 mode"; - baudrate = 115200; - type = "jtagmkii_avr32"; - connection_type = usb; -; - -# JTAG ICE mkII in PDI mode -programmer - id = "jtag2pdi"; - desc = "Atmel JTAG ICE mkII PDI mode"; - baudrate = 115200; - type = "jtagmkii_pdi"; - connection_type = usb; -; - -# AVR Dragon in JTAG mode -programmer - id = "dragon_jtag"; - desc = "Atmel AVR Dragon in JTAG mode"; - baudrate = 115200; - type = "dragon_jtag"; - connection_type = usb; -; - -# AVR Dragon in ISP mode -programmer - id = "dragon_isp"; - desc = "Atmel AVR Dragon in ISP mode"; - baudrate = 115200; - type = "dragon_isp"; - connection_type = usb; -; - -# AVR Dragon in PP mode -programmer - id = "dragon_pp"; - desc = "Atmel AVR Dragon in PP mode"; - baudrate = 115200; - type = "dragon_pp"; - connection_type = usb; -; - -# AVR Dragon in HVSP mode -programmer - id = "dragon_hvsp"; - desc = "Atmel AVR Dragon in HVSP mode"; - baudrate = 115200; - type = "dragon_hvsp"; - connection_type = usb; -; - -# AVR Dragon in debugWire mode -programmer - id = "dragon_dw"; - desc = "Atmel AVR Dragon in debugWire mode"; - baudrate = 115200; - type = "dragon_dw"; - connection_type = usb; -; - -# AVR Dragon in PDI mode -programmer - id = "dragon_pdi"; - desc = "Atmel AVR Dragon in PDI mode"; - baudrate = 115200; - type = "dragon_pdi"; - connection_type = usb; -; - -programmer - id = "jtag3"; - desc = "Atmel AVR JTAGICE3 in JTAG mode"; - type = "jtagice3"; - connection_type = usb; -; - -programmer - id = "jtag3pdi"; - desc = "Atmel AVR JTAGICE3 in PDI mode"; - type = "jtagice3_pdi"; - connection_type = usb; -; - -programmer - id = "jtag3dw"; - desc = "Atmel AVR JTAGICE3 in debugWIRE mode"; - type = "jtagice3_dw"; - connection_type = usb; -; - -programmer - id = "jtag3isp"; - desc = "Atmel AVR JTAGICE3 in ISP mode"; - type = "jtagice3_isp"; - connection_type = usb; -; - - -programmer - id = "pavr"; - desc = "Jason Kyle's pAVR Serial Programmer"; - type = "avr910"; - connection_type = serial; -; - -programmer - id = "pickit2"; - desc = "MicroChip's PICkit2 Programmer"; - type = "pickit2"; - connection_type = usb; -; - -# Parallel port programmers. - -programmer - id = "bsd"; - desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; - type = "par"; - connection_type = parallel; - vcc = 2, 3, 4, 5; - reset = 7; - sck = 8; - mosi = 9; - miso = 10; -; - -programmer - id = "stk200"; - desc = "STK200"; - type = "par"; - connection_type = parallel; - buff = 4, 5; - sck = 6; - mosi = 7; - reset = 9; - miso = 10; -; - -# The programming dongle used by the popular Ponyprog -# utility. It is almost similar to the STK200 one, -# except that there is a LED indicating that the -# programming is currently in progress. - -programmer parent "stk200" - id = "pony-stk200"; - desc = "Pony Prog STK200"; - pgmled = 8; -; - -programmer - id = "dt006"; - desc = "Dontronics DT006"; - type = "par"; - connection_type = parallel; - reset = 4; - sck = 5; - mosi = 2; - miso = 11; -; - -programmer parent "dt006" - id = "bascom"; - desc = "Bascom SAMPLE programming cable"; -; - -programmer - id = "alf"; - desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; - type = "par"; - connection_type = parallel; - vcc = 2, 3, 4, 5; - buff = 6; - reset = 7; - sck = 8; - mosi = 9; - miso = 10; - errled = 1; - rdyled = 14; - pgmled = 16; - vfyled = 17; -; - -programmer - id = "sp12"; - desc = "Steve Bolt's Programmer"; - type = "par"; - connection_type = parallel; - vcc = 4,5,6,7,8; - reset = 3; - sck = 2; - mosi = 9; - miso = 11; -; - -programmer - id = "picoweb"; - desc = "Picoweb Programming Cable, http://www.picoweb.net/"; - type = "par"; - connection_type = parallel; - reset = 2; - sck = 3; - mosi = 4; - miso = 13; -; - -programmer - id = "abcmini"; - desc = "ABCmini Board, aka Dick Smith HOTCHIP"; - type = "par"; - connection_type = parallel; - reset = 4; - sck = 3; - mosi = 2; - miso = 10; -; - -programmer - id = "futurlec"; - desc = "Futurlec.com programming cable."; - type = "par"; - connection_type = parallel; - reset = 3; - sck = 2; - mosi = 1; - miso = 10; -; - - -# From the contributor of the "xil" jtag cable: -# The "vcc" definition isn't really vcc (the cable gets its power from -# the programming circuit) but is necessary to switch one of the -# buffer lines (trying to add it to the "buff" lines doesn't work in -# avrdude versions before 5.5j). -# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK -# to SCK (plus vcc/gnd of course) -programmer - id = "xil"; - desc = "Xilinx JTAG cable"; - type = "par"; - connection_type = parallel; - mosi = 2; - sck = 3; - reset = 4; - buff = 5; - miso = 13; - vcc = 6; -; - - -programmer - id = "dapa"; - desc = "Direct AVR Parallel Access cable"; - type = "par"; - connection_type = parallel; - vcc = 3; - reset = 16; - sck = 1; - mosi = 2; - miso = 11; -; - -programmer - id = "atisp"; - desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; - type = "par"; - connection_type = parallel; - reset = ~6; - sck = ~8; - mosi = ~7; - miso = ~10; -; - -programmer - id = "ere-isp-avr"; - desc = "ERE ISP-AVR "; - type = "par"; - connection_type = parallel; - reset = ~4; - sck = 3; - mosi = 2; - miso = 10; -; - -programmer - id = "blaster"; - desc = "Altera ByteBlaster"; - type = "par"; - connection_type = parallel; - sck = 2; - miso = 11; - reset = 3; - mosi = 8; - buff = 14; -; - -# It is almost same as pony-stk200, except vcc on pin 5 to auto -# disconnect port (download on http://electropol.free.fr/spip/spip.php?article27) -programmer parent "pony-stk200" - id = "frank-stk200"; - desc = "Frank STK200"; - buff = ; # delete buff pin assignment - vcc = 5; -; - -# The AT98ISP Cable is a simple parallel dongle for AT89 family. -# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 -programmer - id = "89isp"; - desc = "Atmel at89isp cable"; - type = "par"; - connection_type = parallel; - reset = 17; - sck = 1; - mosi = 2; - miso = 10; -; - - -#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface -# -#To enable it set the configuration below to match the GPIO lines connected to the -#relevant ISP header pins and uncomment the entry definition. In case you don't -#have the required permissions to edit this system wide config file put the -#entry in a separate .conf file and use it with -C+.conf -#on the command line. -# -#To check if your avrdude build has support for the linuxgpio programmer compiled in, -#use -c?type on the command line and look for linuxgpio in the list. If it's not available -#you need pass the --enable-linuxgpio=yes option to configure and recompile avrdude. -# -#programmer -# id = "linuxgpio"; -# desc = "Use the Linux sysfs interface to bitbang GPIO lines"; -# type = "linuxgpio"; -# reset = ?; -# sck = ?; -# mosi = ?; -# miso = ?; -#; - -#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface and direct -#GPIO memory registers read/write. -# -#To enable it set the configuration below to match the GPIO lines connected to the -#relevant ISP header pins and uncomment the entry definition. In case you don't -#have the required permissions to edit this system wide config file put the -#entry in a separate .conf file and use it with -C+.conf -#on the command line. -# -#To check if your avrdude build has support for the arduinotre programmer compiled in, -#use -c?type on the command line and look for arduinotre in the list. If it's not available -#you need pass the --enable-arduinotre=yes option to configure and recompile avrdude. -# -#programmer -# id = "arduinotre"; -# desc = "Arduino TRE bitbanging using GPIO registers"; -# type = "arduinotre"; -# reset = ~65; -# sck = 49; -# mosi = 48; -# miso = 61; -#; - -# some ultra cheap programmers use bitbanging on the -# serialport. -# -# PC - DB9 - Pins for RS232: -# -# GND 5 -- |O -# | O| <- 9 RI -# DTR 4 <- |O | -# | O| <- 8 CTS -# TXD 3 <- |O | -# | O| -> 7 RTS -# RXD 2 -> |O | -# | O| <- 6 DSR -# DCD 1 -> |O -# -# Using RXD is currently not supported. -# Using RI is not supported under Win32 but is supported under Posix. - -# serial ponyprog design (dasa2 in uisp) -# reset=!txd sck=rts mosi=dtr miso=cts - -programmer - id = "ponyser"; - desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; - type = "serbb"; - connection_type = serial; - reset = ~3; - sck = 7; - mosi = 4; - miso = 8; -; - -# Same as above, different name -# reset=!txd sck=rts mosi=dtr miso=cts - -programmer parent "ponyser" - id = "siprog"; - desc = "Lancos SI-Prog "; -; - -# unknown (dasa in uisp) -# reset=rts sck=dtr mosi=txd miso=cts - -programmer - id = "dasa"; - desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; - type = "serbb"; - connection_type = serial; - reset = 7; - sck = 4; - mosi = 3; - miso = 8; -; - -# unknown (dasa3 in uisp) -# reset=!dtr sck=rts mosi=txd miso=cts - -programmer - id = "dasa3"; - desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; - type = "serbb"; - connection_type = serial; - reset = ~4; - sck = 7; - mosi = 3; - miso = 8; -; - -# C2N232i (jumper configuration "auto") -# reset=dtr sck=!rts mosi=!txd miso=!cts - -programmer - id = "c2n232i"; - desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts"; - type = "serbb"; - connection_type = serial; - reset = 4; - sck = ~7; - mosi = ~3; - miso = ~8; -; - -# -# PART DEFINITIONS -# - -#------------------------------------------------------------ -# ATtiny11 -#------------------------------------------------------------ - -# This is an HVSP-only device. - -part - id = "t11"; - desc = "ATtiny11"; - stk500_devcode = 0x11; - signature = 0x1e 0x90 0x04; - chip_erase_delay = 20000; - - timeout = 200; - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - blocksize = 64; - readsize = 256; - delay = 5; - ; - - memory "flash" - size = 1024; - blocksize = 128; - readsize = 256; - delay = 3; - ; - - memory "signature" - size = 3; - ; - - memory "lock" - size = 1; - ; - - memory "calibration" - size = 1; - ; - - memory "fuse" - size = 1; - ; -; - -#------------------------------------------------------------ -# ATtiny12 -#------------------------------------------------------------ - -part - id = "t12"; - desc = "ATtiny12"; - stk500_devcode = 0x12; - avr910_devcode = 0x55; - signature = 0x1e 0x90 0x05; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 8; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - size = 1024; - min_write_delay = 4500; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -; - -#------------------------------------------------------------ -# ATtiny13 -#------------------------------------------------------------ - -part - id = "t13"; - desc = "ATtiny13"; - has_debugwire = yes; - flash_instr = 0xB4, 0x0E, 0x1E; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; - signature = 0x1e 0x90 0x07; - chip_erase_delay = 4000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 90; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 0; - - memory "eeprom" - size = 64; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 1024; - page_size = 32; - num_pages = 32; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny15 -#------------------------------------------------------------ - -part - id = "t15"; - desc = "ATtiny15"; - stk500_devcode = 0x13; - avr910_devcode = 0x56; - signature = 0x1e 0x90 0x06; - chip_erase_delay = 8200; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 5; - synchcycles = 6; - latchcycles = 16; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - min_write_delay = 8200; - max_write_delay = 8200; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - size = 1024; - min_write_delay = 4100; - max_write_delay = 4100; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x o o o o x x o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x i i i i 1 1 i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -; - -#------------------------------------------------------------ -# AT90s1200 -#------------------------------------------------------------ - -part - id = "1200"; - desc = "AT90S1200"; - is_at90s1200 = yes; - stk500_devcode = 0x33; - avr910_devcode = 0x13; - signature = 0x1e 0x90 0x01; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 1; - bytedelay = 0; - pollindex = 0; - pollvalue = 0xFF; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 64; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 32; - readsize = 256; - ; - memory "flash" - size = 1024; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x02; - delay = 15; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s4414 -#------------------------------------------------------------ - -part - id = "4414"; - desc = "AT90S4414"; - stk500_devcode = 0x50; - avr910_devcode = 0x28; - signature = 0x1e 0x92 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s2313 -#------------------------------------------------------------ - -part - id = "2313"; - desc = "AT90S2313"; - stk500_devcode = 0x40; - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 128; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 2048; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s2333 -#------------------------------------------------------------ - -part - id = "2333"; -##### WARNING: No XML file for device 'AT90S2333'! ##### - desc = "AT90S2333"; - stk500_devcode = 0x42; - avr910_devcode = 0x34; - signature = 0x1e 0x91 0x05; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - size = 2048; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - pwroff_after_write = yes; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - - -#------------------------------------------------------------ -# AT90s2343 (also AT90s2323 and ATtiny22) -#------------------------------------------------------------ - -part - id = "2343"; - desc = "AT90S2343"; - stk500_devcode = 0x43; - avr910_devcode = 0x4c; - signature = 0x1e 0x91 0x03; - chip_erase_delay = 18000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 0; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 2048; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 128; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o o x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o o x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - - -#------------------------------------------------------------ -# AT90s4433 -#------------------------------------------------------------ - -part - id = "4433"; - desc = "AT90S4433"; - stk500_devcode = 0x51; - avr910_devcode = 0x30; - signature = 0x1e 0x92 0x03; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - pwroff_after_write = yes; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s4434 -#------------------------------------------------------------ - -part - id = "4434"; -##### WARNING: No XML file for device 'AT90S4434'! ##### - desc = "AT90S4434"; - stk500_devcode = 0x52; - avr910_devcode = 0x6c; - signature = 0x1e 0x92 0x02; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s8515 -#------------------------------------------------------------ - -part - id = "8515"; - desc = "AT90S8515"; - stk500_devcode = 0x60; - avr910_devcode = 0x38; - signature = 0x1e 0x93 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 512; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 8192; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s8535 -#------------------------------------------------------------ - -part - id = "8535"; - desc = "AT90S8535"; - stk500_devcode = 0x61; - avr910_devcode = 0x68; - signature = 0x1e 0x93 0x03; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 8192; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x x o"; - write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o x x x x x x"; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# ATmega103 -#------------------------------------------------------------ - -part - id = "m103"; - desc = "ATmega103"; - stk500_devcode = 0xB1; - avr910_devcode = 0x41; - signature = 0x1e 0x97 0x01; - chip_erase_delay = 112000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, - 0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, - 0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, - 0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 10; - - memory "eeprom" - size = 4096; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 22000; - max_write_delay = 56000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x11; - delay = 70; - blocksize = 256; - readsize = 256; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o x o 1 o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega64 -#------------------------------------------------------------ - -part - id = "m64"; - desc = "ATmega64"; - has_jtag = yes; - stk500_devcode = 0xA0; - avr910_devcode = 0x45; - signature = 0x1e 0x96 0x02; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x22; - spmcr = 0x68; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - - -#------------------------------------------------------------ -# ATmega128 -#------------------------------------------------------------ - -part - id = "m128"; - desc = "ATmega128"; - has_jtag = yes; - stk500_devcode = 0xB2; - avr910_devcode = 0x43; - signature = 0x1e 0x97 0x02; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x22; - spmcr = 0x68; - rampz = 0x3b; - allowfullpagebitstream = yes; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN128 -#------------------------------------------------------------ - -part - id = "c128"; - desc = "AT90CAN128"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x97 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN64 -#------------------------------------------------------------ - -part - id = "c64"; - desc = "AT90CAN64"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x96 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN32 -#------------------------------------------------------------ - -part - id = "c32"; - desc = "AT90CAN32"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x95 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 256; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega16 -#------------------------------------------------------------ - -part - id = "m16"; - desc = "ATmega16"; - has_jtag = yes; - stk500_devcode = 0x82; - avr910_devcode = 0x74; - signature = 0x1e 0x94 0x03; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 100; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x04; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "calibration" - size = 4; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega164P -#------------------------------------------------------------ - -# close to ATmega16 - -part parent "m16" - id = "m164p"; - desc = "ATmega164P"; - signature = 0x1e 0x94 0x0a; - - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - allowfullpagebitstream = no; - chip_erase_delay = 55000; - - ocdrev = 3; - ; - - -#------------------------------------------------------------ -# ATmega324P -#------------------------------------------------------------ - -# similar to ATmega164P - -part - id = "m324p"; - desc = "ATmega324P"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x95 0x08; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega324PA -#------------------------------------------------------------ - -# similar to ATmega324P - -part parent "m324p" - id = "m324pa"; - desc = "ATmega324PA"; - signature = 0x1e 0x95 0x11; - - ocdrev = 3; - ; - - -#------------------------------------------------------------ -# ATmega644 -#------------------------------------------------------------ - -# similar to ATmega164 - -part - id = "m644"; - desc = "ATmega644"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x96 0x09; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega644P -#------------------------------------------------------------ - -# similar to ATmega164p - -part parent "m644" - id = "m644p"; - desc = "ATmega644P"; - signature = 0x1e 0x96 0x0a; - - ocdrev = 3; - ; - - - -#------------------------------------------------------------ -# ATmega1284P -#------------------------------------------------------------ - -# similar to ATmega164p - -part - id = "m1284p"; - desc = "ATmega1284P"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x97 0x05; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - - - -#------------------------------------------------------------ -# ATmega162 -#------------------------------------------------------------ - -part - id = "m162"; - desc = "ATmega162"; - has_jtag = yes; - stk500_devcode = 0x83; - avr910_devcode = 0x63; - signature = 0x1e 0x94 0x04; - chip_erase_delay = 9000; - pagel = 0xd7; - bs2 = 0xa0; - - idr = 0x04; - spmcr = 0x57; - allowfullpagebitstream = yes; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - ocdrev = 2; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - - ; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - - read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; -; - - - -#------------------------------------------------------------ -# ATmega163 -#------------------------------------------------------------ - -part - id = "m163"; - desc = "ATmega163"; - stk500_devcode = 0x81; - avr910_devcode = 0x64; - signature = 0x1e 0x94 0x02; - chip_erase_delay = 32000; - pagel = 0xd7; - bs2 = 0xa0; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 30; - programfusepulsewidth = 0; - programfusepolltimeout = 2; - programlockpulsewidth = 0; - programlockpolltimeout = 2; - - - memory "eeprom" - size = 512; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 16000; - max_write_delay = 16000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x11; - delay = 20; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o x x o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i 1 1 i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x 1 o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x 0 x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega169 -#------------------------------------------------------------ - -part - id = "m169"; - desc = "ATmega169"; - has_jtag = yes; - stk500_devcode = 0x85; - avr910_devcode = 0x78; - signature = 0x1e 0x94 0x05; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega329 -#------------------------------------------------------------ - -part - id = "m329"; - desc = "ATmega329"; - has_jtag = yes; -# stk500_devcode = 0x85; # no STK500 support, only STK500v2 -# avr910_devcode = 0x?; # try the ATmega169 one: - avr910_devcode = 0x75; - signature = 0x1e 0x95 0x03; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega329P -#------------------------------------------------------------ -# Identical to ATmega329 except of the signature - -part parent "m329" - id = "m329p"; - desc = "ATmega329P"; - signature = 0x1e 0x95 0x0b; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega3290 -#------------------------------------------------------------ - -# identical to ATmega329 - -part parent "m329" - id = "m3290"; - desc = "ATmega3290"; - signature = 0x1e 0x95 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega3290P -#------------------------------------------------------------ - -# identical to ATmega3290 except of the signature - -part parent "m3290" - id = "m3290p"; - desc = "ATmega3290P"; - signature = 0x1e 0x95 0x0c; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega649 -#------------------------------------------------------------ - -part - id = "m649"; - desc = "ATmega649"; - has_jtag = yes; -# stk500_devcode = 0x85; # no STK500 support, only STK500v2 -# avr910_devcode = 0x?; # try the ATmega169 one: - avr910_devcode = 0x75; - signature = 0x1e 0x96 0x03; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega6490 -#------------------------------------------------------------ - -# identical to ATmega649 - -part parent "m649" - id = "m6490"; - desc = "ATmega6490"; - signature = 0x1e 0x96 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega32 -#------------------------------------------------------------ - -part - id = "m32"; - desc = "ATmega32"; - has_jtag = yes; - stk500_devcode = 0x91; - avr910_devcode = 0x72; - signature = 0x1e 0x95 0x02; - chip_erase_delay = 9000; - pagel = 0xd7; - bs2 = 0xa0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega161 -#------------------------------------------------------------ - -part - id = "m161"; - desc = "ATmega161"; - stk500_devcode = 0x80; - avr910_devcode = 0x60; - signature = 0x1e 0x94 0x01; - chip_erase_delay = 28000; - pagel = 0xd7; - bs2 = 0xa0; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 30; - programfusepulsewidth = 0; - programfusepolltimeout = 2; - programlockpulsewidth = 0; - programlockpolltimeout = 2; - - memory "eeprom" - size = 512; - min_write_delay = 3400; - max_write_delay = 3400; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 14000; - max_write_delay = 14000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 16; - blocksize = 128; - readsize = 256; - ; - - memory "fuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x o x o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x 1 i 1 i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega8 -#------------------------------------------------------------ - -part - id = "m8"; - desc = "ATmega8"; - stk500_devcode = 0x70; - avr910_devcode = 0x76; - signature = 0x1e 0x93 0x07; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 10000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - page_size = 4; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - -#------------------------------------------------------------ -# ATmega8515 -#------------------------------------------------------------ - -part - id = "m8515"; - desc = "ATmega8515"; - stk500_devcode = 0x63; - avr910_devcode = 0x3A; - signature = 0x1e 0x93 0x06; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - - -#------------------------------------------------------------ -# ATmega8535 -#------------------------------------------------------------ - -part - id = "m8535"; - desc = "ATmega8535"; - stk500_devcode = 0x64; - avr910_devcode = 0x69; - signature = 0x1e 0x93 0x08; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATtiny26 -#------------------------------------------------------------ - -part - id = "t26"; - desc = "ATtiny26"; - stk500_devcode = 0x21; - avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x09; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 16; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x x x x i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny261 -#------------------------------------------------------------ -# Close to ATtiny26 - -part - id = "t261"; - desc = "ATtiny261"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x0c; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 128; - page_size = 4; - num_pages = 32; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny461 -#------------------------------------------------------------ -# Close to ATtiny261 - -part - id = "t461"; - desc = "ATtiny461"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x92 0x08; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 256; - page_size = 4; - num_pages = 64; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny861 -#------------------------------------------------------------ -# Close to ATtiny461 - -part - id = "t861"; - desc = "ATtiny861"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x93 0x0d; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 512; - num_pages = 128; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATmega48 -#------------------------------------------------------------ - -part - id = "m48"; - desc = "ATmega48"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x59; -# avr910_devcode = 0x; - signature = 0x1e 0x92 0x05; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 45000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 256; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x x", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega48P -#------------------------------------------------------------ - -part parent "m48" - id = "m48p"; - desc = "ATmega48P"; - signature = 0x1e 0x92 0x0a; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# ATmega88 -#------------------------------------------------------------ - -part - id = "m88"; - desc = "ATmega88"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x73; -# avr910_devcode = 0x; - signature = 0x1e 0x93 0x0a; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 512; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega88P -#------------------------------------------------------------ - -part parent "m88" - id = "m88p"; - desc = "ATmega88P"; - signature = 0x1e 0x93 0x0f; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# ATmega168 -#------------------------------------------------------------ - -part - id = "m168"; - desc = "ATmega168"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x94 0x06; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 512; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# ATmega168P -#------------------------------------------------------------ - -part parent "m168" - id = "m168p"; - desc = "ATmega168P"; - signature = 0x1e 0x94 0x0b; - - ocdrev = 1; -; - -#------------------------------------------------------------ -# ATtiny88 -#------------------------------------------------------------ - -part - id = "t88"; - desc = "ATtiny88"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x73; -# avr910_devcode = 0x; - signature = 0x1e 0x93 0x11; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 64; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 64; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega328 -#------------------------------------------------------------ - -part - id = "m328"; - desc = "ATmega328"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x95 0x14; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 1024; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -part parent "m328" - id = "m328p"; - desc = "ATmega328P"; - signature = 0x1e 0x95 0x0F; - - ocdrev = 1; -; - -#------------------------------------------------------------ -# ATtiny2313 -#------------------------------------------------------------ - -part - id = "t2313"; - desc = "ATtiny2313"; - has_debugwire = yes; - flash_instr = 0xB2, 0x0F, 0x1F; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x23; -## Use the ATtiny26 devcode: - avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x0a; - pagel = 0xD4; - bs2 = 0xD6; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 0; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - -# The information in the data sheet of April/2004 is wrong, this works: - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - -# The information in the data sheet of April/2004 is wrong, this works: - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - -# The information in the data sheet of April/2004 is wrong, this works: - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -# The Tiny2313 has calibration data for both 4 MHz and 8 MHz. -# The information in the data sheet of April/2004 is wrong, this works: - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny4313 -#------------------------------------------------------------ - -part - id = "t4313"; - desc = "ATtiny4313"; - has_debugwire = yes; - flash_instr = 0xB2, 0x0F, 0x1F; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x23; -## Use the ATtiny26 devcode: - avr910_devcode = 0x5e; - signature = 0x1e 0x92 0x0d; - pagel = 0xD4; - bs2 = 0xD6; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 0; - - memory "eeprom" - size = 256; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny4313 has Signature Bytes: 0x1E 0x92 0x0D. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90PWM2 -#------------------------------------------------------------ - -part - id = "pwm2"; - desc = "AT90PWM2"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x65; -## avr910_devcode = ?; - signature = 0x1e 0x93 0x81; - pagel = 0xD8; - bs2 = 0xE2; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; -# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90PWM3 -#------------------------------------------------------------ - -# Completely identical to AT90PWM2 (including the signature!) - -part parent "pwm2" - id = "pwm3"; - desc = "AT90PWM3"; - ; - -#------------------------------------------------------------ -# AT90PWM2B -#------------------------------------------------------------ -# Same as AT90PWM2 but different signature. - -part parent "pwm2" - id = "pwm2b"; - desc = "AT90PWM2B"; - signature = 0x1e 0x93 0x83; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# AT90PWM3B -#------------------------------------------------------------ - -# Completely identical to AT90PWM2B (including the signature!) - -part parent "pwm2b" - id = "pwm3b"; - desc = "AT90PWM3B"; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# AT90PWM316 -#------------------------------------------------------------ - -# Similar to AT90PWM3B, but with 16 kiB flash, 512 B EEPROM, and 1024 B SRAM. - -part parent "pwm3b" - id = "pwm316"; - desc = "AT90PWM316"; - signature = 0x1e 0x94 0x83; - - ocdrev = 1; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATtiny25 -#------------------------------------------------------------ - -part - id = "t25"; - desc = "ATtiny25"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x08; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny45 -#------------------------------------------------------------ - -part - id = "t45"; - desc = "ATtiny45"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x06; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 256; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!) - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny85 -#------------------------------------------------------------ - -part - id = "t85"; - desc = "ATtiny85"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x93 0x0b; - reset = io; - chip_erase_delay = 400000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 12; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 30000; - max_write_delay = 30000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega640 -#------------------------------------------------------------ -# Almost same as ATmega1280, except for different memory sizes - -part - id = "m640"; - desc = "ATmega640"; - signature = 0x1e 0x96 0x08; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega1280 -#------------------------------------------------------------ - -part - id = "m1280"; - desc = "ATmega1280"; - signature = 0x1e 0x97 0x03; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega1281 -#------------------------------------------------------------ -# Identical to ATmega1280 - -part parent "m1280" - id = "m1281"; - desc = "ATmega1281"; - signature = 0x1e 0x97 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega2560 -#------------------------------------------------------------ - -part - id = "m2560"; - desc = "ATmega2560"; - signature = 0x1e 0x98 0x01; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 4; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 262144; - page_size = 256; - num_pages = 1024; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - load_ext_addr = " 0 1 0 0 1 1 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 a16", - " 0 0 0 0 0 0 0 0"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega2561 -#------------------------------------------------------------ - -part parent "m2560" - id = "m2561"; - desc = "ATmega2561"; - signature = 0x1e 0x98 0x02; - - ocdrev = 4; - ; - -#------------------------------------------------------------ -# ATmega128RFA1 -#------------------------------------------------------------ -# Identical to ATmega2561 but half the ROM - -part parent "m2561" - id = "m128rfa1"; - desc = "ATmega128RFA1"; - signature = 0x1e 0xa7 0x01; - chip_erase_delay = 55000; - bs2 = 0xE2; - - ocdrev = 3; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 50000; - max_write_delay = 50000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 256; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATmega256RFR2 -#------------------------------------------------------------ - -part parent "m2561" - id = "m256rfr2"; - desc = "ATmega256RFR2"; - signature = 0x1e 0xa8 0x02; - chip_erase_delay = 55000; - bs2 = 0xE2; - - - ocdrev = 4; - ; - -#------------------------------------------------------------ -# ATmega128RFR2 -#------------------------------------------------------------ - -part parent "m128rfa1" - id = "m128rfr2"; - desc = "ATmega128RFR2"; - signature = 0x1e 0xa7 0x02; - - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega64RFR2 -#------------------------------------------------------------ - -part parent "m128rfa1" - id = "m64rfr2"; - desc = "ATmega64RFR2"; - signature = 0x1e 0xa6 0x02; - - - ocdrev = 3; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 50000; - max_write_delay = 50000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 256; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATmega2564RFR2 -#------------------------------------------------------------ - -part parent "m256rfr2" - id = "m2564rfr2"; - desc = "ATmega2564RFR2"; - signature = 0x1e 0xa8 0x03; - ; - -#------------------------------------------------------------ -# ATmega1284RFR2 -#------------------------------------------------------------ - -part parent "m128rfr2" - id = "m1284rfr2"; - desc = "ATmega1284RFR2"; - signature = 0x1e 0xa7 0x03; - ; - -#------------------------------------------------------------ -# ATmega644RFR2 -#------------------------------------------------------------ - -part parent "m64rfr2" - id = "m644rfr2"; - desc = "ATmega644RFR2"; - signature = 0x1e 0xa6 0x03; - ; - -#------------------------------------------------------------ -# ATtiny24 -#------------------------------------------------------------ - -part - id = "t24"; - desc = "ATtiny24"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x0b; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny44 -#------------------------------------------------------------ - -part - id = "t44"; - desc = "ATtiny44"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x07; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 256; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny84 -#------------------------------------------------------------ - -part - id = "t84"; - desc = "ATtiny84"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x93 0x0c; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny43U -#------------------------------------------------------------ - -part - id = "t43u"; - desc = "ATtiny43u"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x0C; - reset = io; - chip_erase_delay = 1000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, 0x4E, 0x5E, - 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, 0x06, 0x16, 0x46, 0x56, - 0x0A, 0x1A, 0x4A, 0x5A, 0x1E, 0x7C, 0x00, 0x01, 0x00, 0x00, - 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 20; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - memory "eeprom" - size = 64; - paged = yes; - page_size = 4; - num_pages = 16; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "0 0 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "0 0 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " 0 0 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 64; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# ATmega32u4 -#------------------------------------------------------------ - -part - id = "m32u4"; - desc = "ATmega32U4"; - signature = 0x1e 0x95 0x87; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB646 -#------------------------------------------------------------ - -part - id = "usb646"; - desc = "AT90USB646"; - signature = 0x1e 0x96 0x82; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB647 -#------------------------------------------------------------ -# identical to AT90USB646 - -part parent "usb646" - id = "usb647"; - desc = "AT90USB647"; - signature = 0x1e 0x96 0x82; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AT90USB1286 -#------------------------------------------------------------ - -part - id = "usb1286"; - desc = "AT90USB1286"; - signature = 0x1e 0x97 0x82; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB1287 -#------------------------------------------------------------ -# identical to AT90USB1286 - -part parent "usb1286" - id = "usb1287"; - desc = "AT90USB1287"; - signature = 0x1e 0x97 0x82; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AT90USB162 -#------------------------------------------------------------ - -part - id = "usb162"; - desc = "AT90USB162"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x94 0x82; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB82 -#------------------------------------------------------------ -# Changes against AT90USB162 (beside IDs) -# memory "flash" -# size = 8192; -# num_pages = 64; - -part - id = "usb82"; - desc = "AT90USB82"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x93 0x82; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 128; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega32U2 -#------------------------------------------------------------ -# Changes against AT90USB162 (beside IDs) -# memory "flash" -# size = 32768; -# num_pages = 256; -# memory "eeprom" -# size = 1024; -# num_pages = 256; -part - id = "m32u2"; - desc = "ATmega32U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x95 0x8a; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - num_pages = 256; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; -#------------------------------------------------------------ -# ATmega16U2 -#------------------------------------------------------------ -# Changes against ATmega32U2 (beside IDs) -# memory "flash" -# size = 16384; -# num_pages = 128; -# memory "eeprom" -# size = 512; -# num_pages = 128; -part - id = "m16u2"; - desc = "ATmega16U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x94 0x89; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega8U2 -#------------------------------------------------------------ -# Changes against ATmega16U2 (beside IDs) -# memory "flash" -# size = 8192; -# page_size = 64; -# blocksize = 64; - -part - id = "m8u2"; - desc = "ATmega8U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x93 0x89; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; -#------------------------------------------------------------ -# ATmega325 -#------------------------------------------------------------ - -part - id = "m325"; - desc = "ATmega325"; - signature = 0x1e 0x95 0x05; - has_jtag = yes; -# stk500_devcode = 0x??; # No STK500v1 support? -# avr910_devcode = 0x??; # Try the ATmega16 one - avr910_devcode = 0x74; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega645 -#------------------------------------------------------------ - -part - id = "m645"; - desc = "ATmega645"; - signature = 0x1E 0x96 0x05; - has_jtag = yes; -# stk500_devcode = 0x??; # No STK500v1 support? -# avr910_devcode = 0x??; # Try the ATmega16 one - avr910_devcode = 0x74; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " 0 0 0 0 0 0 0 0"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega3250 -#------------------------------------------------------------ - -part parent "m325" - id = "m3250"; - desc = "ATmega3250"; - signature = 0x1E 0x95 0x06; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega6450 -#------------------------------------------------------------ - -part parent "m645" - id = "m6450"; - desc = "ATmega6450"; - signature = 0x1E 0x96 0x06; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AVR XMEGA family common values -#------------------------------------------------------------ - -part - id = ".xmega"; - desc = "AVR XMEGA family common values"; - has_pdi = yes; - nvm_base = 0x01c0; - mcu_base = 0x0090; - - memory "signature" - size = 3; - offset = 0x1000090; - ; - - memory "prodsig" - size = 0x32; - offset = 0x8e0200; - page_size = 0x32; - readsize = 0x32; - ; - - memory "fuse1" - size = 1; - offset = 0x8f0021; - ; - - memory "fuse2" - size = 1; - offset = 0x8f0022; - ; - - memory "fuse4" - size = 1; - offset = 0x8f0024; - ; - - memory "fuse5" - size = 1; - offset = 0x8f0025; - ; - - memory "lock" - size = 1; - offset = 0x8f0027; - ; - - memory "data" - # SRAM, only used to supply the offset - offset = 0x1000000; - ; -; - -#------------------------------------------------------------ -# ATxmega16A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x16a4u"; - desc = "ATxmega16A4U"; - signature = 0x1e 0x94 0x41; - - memory "eeprom" - size = 0x400; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x4000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x803000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x804000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x5000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega16C4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16c4"; - desc = "ATxmega16C4"; - signature = 0x1e 0x95 0x44; -; - -#------------------------------------------------------------ -# ATxmega16D4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16d4"; - desc = "ATxmega16D4"; - signature = 0x1e 0x94 0x42; -; - -#------------------------------------------------------------ -# ATxmega16A4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16a4"; - desc = "ATxmega16A4"; - signature = 0x1e 0x94 0x41; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega32A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x32a4u"; - desc = "ATxmega32A4U"; - signature = 0x1e 0x95 0x41; - - memory "eeprom" - size = 0x400; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x8000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x807000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x808000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x9000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega32C4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32c4"; - desc = "ATxmega32C4"; - signature = 0x1e 0x94 0x43; -; - -#------------------------------------------------------------ -# ATxmega32D4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32d4"; - desc = "ATxmega32D4"; - signature = 0x1e 0x95 0x42; -; - -#------------------------------------------------------------ -# ATxmega32A4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32a4"; - desc = "ATxmega32A4"; - signature = 0x1e 0x95 0x41; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega64A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x64a4u"; - desc = "ATxmega64A4U"; - signature = 0x1e 0x96 0x46; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x10000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x80f000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x810000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x11000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega64C3 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64c3"; - desc = "ATxmega64C3"; - signature = 0x1e 0x96 0x49; -; - -#------------------------------------------------------------ -# ATxmega64D3 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64d3"; - desc = "ATxmega64D3"; - signature = 0x1e 0x96 0x4a; -; - -#------------------------------------------------------------ -# ATxmega64D4 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64d4"; - desc = "ATxmega64D4"; - signature = 0x1e 0x96 0x47; -; - -#------------------------------------------------------------ -# ATxmega64A1 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64a1"; - desc = "ATxmega64A1"; - signature = 0x1e 0x96 0x4e; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega64A1U -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a1u"; - desc = "ATxmega64A1U"; - signature = 0x1e 0x96 0x4e; -; - -#------------------------------------------------------------ -# ATxmega64A3 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a3"; - desc = "ATxmega64A3"; - signature = 0x1e 0x96 0x42; -; - -#------------------------------------------------------------ -# ATxmega64A3U -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a3u"; - desc = "ATxmega64A3U"; - signature = 0x1e 0x96 0x42; -; - -#------------------------------------------------------------ -# ATxmega64A4 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a4"; - desc = "ATxmega64A4"; - signature = 0x1e 0x96 0x46; -; - -#------------------------------------------------------------ -# ATxmega64B1 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64b1"; - desc = "ATxmega64B1"; - signature = 0x1e 0x96 0x52; -; - -#------------------------------------------------------------ -# ATxmega64B3 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64b3"; - desc = "ATxmega64B3"; - signature = 0x1e 0x96 0x51; -; - -#------------------------------------------------------------ -# ATxmega128C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128c3"; - desc = "ATxmega128C3"; - signature = 0x1e 0x97 0x52; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x81e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega128D3 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128d3"; - desc = "ATxmega128D3"; - signature = 0x1e 0x97 0x48; -; - -#------------------------------------------------------------ -# ATxmega128D4 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128d4"; - desc = "ATxmega128D4"; - signature = 0x1e 0x97 0x47; -; - -#------------------------------------------------------------ -# ATxmega128A1 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128a1"; - desc = "ATxmega128A1"; - signature = 0x1e 0x97 0x4c; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128A1 revision D -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a1d"; - desc = "ATxmega128A1revD"; - signature = 0x1e 0x97 0x41; -; - -#------------------------------------------------------------ -# ATxmega128A1U -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a1u"; - desc = "ATxmega128A1U"; - signature = 0x1e 0x97 0x4c; -; - -#------------------------------------------------------------ -# ATxmega128A3 -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a3"; - desc = "ATxmega128A3"; - signature = 0x1e 0x97 0x42; -; - -#------------------------------------------------------------ -# ATxmega128A3U -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a3u"; - desc = "ATxmega128A3U"; - signature = 0x1e 0x97 0x42; -; - -#------------------------------------------------------------ -# ATxmega128A4 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128a4"; - desc = "ATxmega128A4"; - signature = 0x1e 0x97 0x46; - has_jtag = yes; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x81f000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128a4u"; - desc = "ATxmega128A4U"; - signature = 0x1e 0x97 0x46; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x81f000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega128B1 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128b1"; - desc = "ATxmega128B1"; - signature = 0x1e 0x97 0x4d; - has_jtag = yes; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x81e000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128B3 -#------------------------------------------------------------ - -part parent "x128b1" - id = "x128b3"; - desc = "ATxmega128B3"; - signature = 0x1e 0x97 0x4b; -; - -#------------------------------------------------------------ -# ATxmega192C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x192c3"; - desc = "ATxmega192C3"; - signature = 0x1e 0x97 0x51; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x30000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x82e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x830000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x32000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega192D3 -#------------------------------------------------------------ - -part parent "x192c3" - id = "x192d3"; - desc = "ATxmega192D3"; - signature = 0x1e 0x97 0x49; -; - -#------------------------------------------------------------ -# ATxmega192A1 -#------------------------------------------------------------ - -part parent "x192c3" - id = "x192a1"; - desc = "ATxmega192A1"; - signature = 0x1e 0x97 0x4e; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega192A3 -#------------------------------------------------------------ - -part parent "x192a1" - id = "x192a3"; - desc = "ATxmega192A3"; - signature = 0x1e 0x97 0x44; -; - -#------------------------------------------------------------ -# ATxmega192A3U -#------------------------------------------------------------ - -part parent "x192a1" - id = "x192a3u"; - desc = "ATxmega192A3U"; - signature = 0x1e 0x97 0x44; -; - -#------------------------------------------------------------ -# ATxmega256C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x256c3"; - desc = "ATxmega256C3"; - signature = 0x1e 0x98 0x46; - - memory "eeprom" - size = 0x1000; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x40000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x83e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x840000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x42000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega256D3 -#------------------------------------------------------------ - -part parent "x256c3" - id = "x256d3"; - desc = "ATxmega256D3"; - signature = 0x1e 0x98 0x44; -; - -#------------------------------------------------------------ -# ATxmega256A1 -#------------------------------------------------------------ - -part parent "x256c3" - id = "x256a1"; - desc = "ATxmega256A1"; - signature = 0x1e 0x98 0x46; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega256A3 -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3"; - desc = "ATxmega256A3"; - signature = 0x1e 0x98 0x42; -; - -#------------------------------------------------------------ -# ATxmega256A3U -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3u"; - desc = "ATxmega256A3U"; - signature = 0x1e 0x98 0x42; -; - -#------------------------------------------------------------ -# ATxmega256A3B -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3b"; - desc = "ATxmega256A3B"; - signature = 0x1e 0x98 0x43; -; - -#------------------------------------------------------------ -# ATxmega256A3BU -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3bu"; - desc = "ATxmega256A3BU"; - signature = 0x1e 0x98 0x43; -; - -#------------------------------------------------------------ -# ATxmega384C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x384c3"; - desc = "ATxmega384C3"; - signature = 0x1e 0x98 0x45; - - memory "eeprom" - size = 0x1000; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x60000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x85e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x860000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x62000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega384D3 -#------------------------------------------------------------ - -part parent "x384c3" - id = "x384d3"; - desc = "ATxmega384D3"; - signature = 0x1e 0x98 0x47; -; - -#------------------------------------------------------------ -# ATxmega8E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x8e5"; - desc = "ATxmega8E5"; - signature = 0x1e 0x93 0x41; - - memory "eeprom" - size = 0x0200; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x2000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x800; - offset = 0x00801800; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x800; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x2800; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega16E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x16e5"; - desc = "ATxmega16E5"; - signature = 0x1e 0x94 0x45; - - memory "eeprom" - size = 0x0200; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x4000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x00803000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x5000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega32E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x32e5"; - desc = "ATxmega32E5"; - signature = 0x1e 0x95 0x4c; - - memory "eeprom" - size = 0x0400; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x8000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x00807000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x9000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# AVR32UC3A0512 -#------------------------------------------------------------ - -part - id = "uc3a0512"; - desc = "AT32UC3A0512"; - signature = 0xED 0xC0 0x3F; - has_jtag = yes; - is_avr32 = yes; - - memory "flash" - paged = yes; - page_size = 512; # bytes - readsize = 512; # bytes - num_pages = 1024; # could be set dynamicly - size = 0x00080000; # could be set dynamicly - offset = 0x80000000; - ; -; - -part parent "uc3a0512" - id = "ucr2"; - desc = "deprecated, use 'uc3a0512'"; -; - -#------------------------------------------------------------ -# ATtiny1634. -#------------------------------------------------------------ - -part - id = "t1634"; - desc = "ATtiny1634"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x94 0x12; - pagel = 0xB3; - bs2 = 0xB1; - reset = io; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - paged = no; - page_size = 4; - size = 256; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 32; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 1 1 1 1 i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# Common values for reduced core tinys (4/5/9/10/20/40) -#------------------------------------------------------------ - -part - id = ".reduced_core_tiny"; - desc = "Common values for reduced core tinys"; - has_tpi = yes; - - memory "signature" - size = 3; - offset = 0x3fc0; - page_size = 16; - ; - - memory "fuse" - size = 1; - offset = 0x3f40; - page_size = 16; - blocksize = 4; - ; - - memory "calibration" - size = 1; - offset = 0x3f80; - page_size = 16; - ; - - memory "lockbits" - size = 1; - offset = 0x3f00; - page_size = 16; - ; -; - -#------------------------------------------------------------ -# ATtiny4 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t4"; - desc = "ATtiny4"; - signature = 0x1e 0x8f 0x0a; - - memory "flash" - size = 512; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny5 -#------------------------------------------------------------ - -part parent "t4" - id = "t5"; - desc = "ATtiny5"; - signature = 0x1e 0x8f 0x09; -; - -#------------------------------------------------------------ -# ATtiny9 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t9"; - desc = "ATtiny9"; - signature = 0x1e 0x90 0x08; - - memory "flash" - size = 1024; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny10 -#------------------------------------------------------------ - -part parent "t9" - id = "t10"; - desc = "ATtiny10"; - signature = 0x1e 0x90 0x03; -; - -#------------------------------------------------------------ -# ATtiny20 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t20"; - desc = "ATtiny20"; - signature = 0x1e 0x91 0x0F; - - memory "flash" - size = 2048; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny40 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t40"; - desc = "ATtiny40"; - signature = 0x1e 0x92 0x0E; - - memory "flash" - size = 4096; - offset = 0x4000; - page_size = 64; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATmega406 -#------------------------------------------------------------ - -part - id = "m406"; - desc = "ATMEGA406"; - has_jtag = yes; - signature = 0x1e 0x95 0x07; - - # STK500 parameters (parallel programming IO lines) - pagel = 0xa7; - bs2 = 0xa0; - serial = no; - parallel = yes; - - # STK500v2 HV programming parameters, from XML - pp_controlstack = 0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f, - 0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f, - 0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b, - 0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - - # JTAG ICE mkII parameters, also from XML files - allowfullpagebitstream = no; - enablepageprogramming = yes; - idr = 0x51; - rampz = 0x00; - spmcr = 0x57; - eecr = 0x3f; - - memory "eeprom" - paged = no; - size = 512; - page_size = 4; - blocksize = 4; - readsize = 4; - num_pages = 128; - ; - - memory "flash" - paged = yes; - size = 40960; - page_size = 128; - blocksize = 128; - readsize = 128; - num_pages = 320; - ; - - memory "hfuse" - size = 1; - ; - - memory "lfuse" - size = 1; - ; - - memory "lockbits" - size = 1; - ; - - memory "signature" - size = 3; - ; -; - - diff --git a/bootloaders/gemma/gemma_v1.hex b/bootloaders/gemma/gemma_v1.hex deleted file mode 100644 index 4b68876..0000000 --- a/bootloaders/gemma/gemma_v1.hex +++ /dev/null @@ -1,182 +0,0 @@ -:100000005FCA5FCA5FCA5FCA5FCA5FCA5FCA5FCAA8 -:1014C00033C05FC08BC05DC05CC05BC05AC059C038 -:1014D00058C057C056C055C054C053C052C009026E -:1014E0001200010100803209040000000000000029 -:1014F00012011001FF00000841239F0C00010102AE -:1015000000010C03470065006D006D0061001603CB -:10151000410072006400750069006E006F002E00CB -:10152000630063000403090411241FBECFE5D2E069 -:10153000DEBFCDBF84B7877F84BF88E10FB6F89444 -:1015400081BD11BC0FBE91E080E80FB6F89486BD56 -:1015500096BD0FBE0AEA0F9310E0A0E6B0E0EEEDF4 -:10156000FFE102C005900D92A236B107D9F711E054 -:10157000A2E6B0E001C01D92A832B107E1F7EDD3B9 -:101580002CC59ECFA82FB92F80E090E041E050EA13 -:10159000609530E009C02D9182279795879510F0CE -:1015A00084279527305EC8F36F5FA8F30895EADFBC -:1015B0008D939D930895A6E088279927AA9569F0B1 -:1015C0000197E1F3B399FCCFB39BFECF81E099275C -:1015D000A6B3019611F0A871D9F70895CF93CFB7AC -:1015E000CF93C0915F02CA3A21F0CF91CFBFCF9184 -:1015F00065CFCC27C395B39BE9F7B39B0BC0B39BD7 -:1016000009C0B39B07C0B39B05C0B39B03C0B39B8A -:1016100001C0D3C00F92DF93C0910B01DD27CE5ED6 -:10162000DE4F012EB39B03C0DF910F90E6CF2F93C7 -:101630000F931F934F932FEF4F6F06B303FB20F9C8 -:101640005F933F9350E03BE065C016B301265029FD -:1016500053FDC89556B3012703FB25F92F7306B335 -:10166000B1F05027102713FB26F906B22230F0F014 -:1016700000C016B3012703FB27F90126502906B243 -:101680002430E8F54F77206816B30000F6CF5027D6 -:101690004F7D206206B2102F000000C006B3002666 -:1016A0005029102713FB26F906B2E2CF4F7B06B371 -:1016B000206400C0DACF01265029187106B269F102 -:1016C0004E7F2160012F16B328C0002650294D7F80 -:1016D00006B22260102F29C0012650294B7F06B286 -:1016E0002460012F2DC016B301265029477F2860A2 -:1016F000000006B22EC04F7E06B3206130C04227E4 -:1017000006B3499300265029102706B24FEF13FB6A -:1017100020F9297F16B379F2187159F10126502961 -:1017200006B2012703FB21F9237F06B371F20026DD -:1017300050293150D0F006B2102713FB22F9277E32 -:1017400016B351F201265029012703FB06B223F9F3 -:101750002F7C49F2000006B3102713FB24F9002662 -:10176000502906B22F7939F270CF10E21ABF002744 -:1017700017C03B503195C31BD04010E21ABF0881FF -:10178000033CF9F00B34E9F0209109011981110FA4 -:101790001213EDCF093651F10D3211F0013E39F738 -:1017A000009310013F915F914F911F910F912F91E5 -:1017B000DF910F90CAB7C5FD1DCFCF91CFBFCF919D -:1017C000189520911001222369F310910E01112325 -:1017D00021F5343022F130930E0120930A0110914B -:1017E0000B013BE0311B30930B0119C000910E013E -:1017F00001309CF40AE53091610034FD11C0009382 -:101800006100CEEFD0E010C0052710E000C021C07D -:10181000052710E0C89508BB14C03AE501C032EDB9 -:10182000032EC0E0D0E032E017B31861C39A08B3CA -:1018300017BB58E120E84FEF20FF052708BB27958D -:1018400017951C3F28F700004552B0F720FF0527E9 -:10185000279508BB17951C3FB8F629913A9561F773 -:10186000077E10910F01110F08BBC250D04011F03C -:101870001093090110E21ABF086017B3177E402FBA -:10188000477E54E05A95F1F708BB17BB48BB8ACF97 -:101890002091F9003091FA002D3B3441B8F421E059 -:1018A0002093F600F894E091F900F091FA000C0111 -:1018B00020935700E895112478948091F900909135 -:1018C000FA0002969093FA008093F90008958091AF -:1018D000F600882309F43DC08091F9009091FA0048 -:1018E000813C944108F035C0F8948091F9009091C2 -:1018F000FA008238944118F1809166009091670057 -:101900008F559A409F70906CEEEBF4E121E00C0152 -:1019100020935700E895112480916E0090916F00FC -:101920008C559A409F70906CECEBF4E10C01209385 -:101930005700E8951124789481E080936400E09149 -:10194000F900F091FA00329785E080935700E8950E -:1019500078941092F6000895FF920F931F93CF93FF -:10196000DF9380910E01835087FD5AC190910B0146 -:10197000ACE0B0E0A91BB109AE5EBE4F31E03093E0 -:10198000620090910A019D3209F00AC1883009F085 -:1019900045C183EC8093FE008AE58093610010923C -:1019A000FD008C91807609F47DC01092F3001092B6 -:1019B000F5001092F40011962C911197213009F442 -:1019C00069C0263021F481E08093FC0067C0273095 -:1019D00009F040C03093FC0089EE90E090930D0137 -:1019E00080930C0113969C9113979093EB001092A7 -:1019F000EC0012968C911297803379F491114CC0BF -:101A00001496EC911497F0E0EE0FFF1F81E28093A3 -:101A10005700E491E093EC003FC08C3A81F4903899 -:101A2000D9F514968C911497811136C015968C9126 -:101A30001597811131C081E08093E8002DC08C346E -:101A400059F515968C911597811126C081E08093E8 -:101A5000E70022C0283009F4B6CF14968D919C91EE -:101A600015979093FA008093F90016968C9116972B -:101A70008093F10087EF820F843080F48FE788BD78 -:101A80003093FB002093F2002A3051F081E08093E4 -:101A9000FC0006C021E077C024E075C020E073C0E0 -:101AA0002FEF68C012969C91129710920701119621 -:101AB0008C911197811106C01092080187E091E086 -:101AC00022E052C0853019F490930F013FC0863058 -:101AD000B9F513968C911397813019F480EF94E146 -:101AE00004C0823041F48EED94E190930D01809317 -:101AF0000C0122E121C08330F1F4911108C084E28D -:101B000095E190930D0180930C0124E015C0913074 -:101B100041F48EE095E190930D0180930C0126E154 -:101B20000BC0923041F482E095E190930D018093D7 -:101B30000C012CE001C020E080E48093FD0018C07F -:101B4000883079F0893031F49093110187E091E089 -:101B500020E00AC021E08A3009F020E087E091E02F -:101B600003C081E191E021E090930D0180930C018D -:101B70002F3F49F48C9187FF02C016962C9180E884 -:101B80008093FD000AC017968C911797811105C0AC -:101B900016968C91821708F4282F209360003EC07F -:101BA0009091FD0097FF3AC09091F100182F98177F -:101BB00008F4192F092F011B0093F1001092FC006B -:101BC0008091F2008A3029F0011128C01092600043 -:101BD00025C0FA2ECA2FDB2F8C2F8F198117A0F763 -:101BE0008091F9009091FA008034910590F421E001 -:101BF00020936500FC01EE0FFF1FEA59FF4F28817B -:101C000039813183208302969093FA008093F90002 -:101C100003C0888199813CDE2296DECF10920E01AE -:101C20008091610084FF7BC0809160008F3F09F448 -:101C300076C0182F893008F018E0811B809360006F -:101C40008091FE0098E889278093FE00112309F413 -:101C50005AC08091FD0087FF38C08091F100811744 -:101C600008F4182F811B8093F1003091F200E0916D -:101C7000F900F091FA0020E0AFEFB0E0211700F595 -:101C80003B3009F4FFCF3930D9F7E034F10560F487 -:101C9000EF01CC0FDD1FCA59DF4F888199818D93E9 -:101CA0009D932E5F3296EACFEC3B84E1F80710F06B -:101CB0008FEF01C084918C9311962F5F3196DECF08 -:101CC000F093FA00E093F9001EC0E0910C01F0914E -:101CD0000D0186FF0BC08FEF90E0DC0124912D9366 -:101CE0003196212F280F2A13F9CF09C08FEF90E0EA -:101CF000DC0121912D93212F280F2A13FACFF09385 -:101D00000D01E0930C01612F8FEF90E050DC1C5F20 -:101D10001C3019F08FEF809360001093610084E114 -:101D200096B3987131F48150D9F710920F01109247 -:101D30000901C1E08111C0E0809163008C1739F086 -:101D4000C11103C0F89401D17894C0936300DF916E -:101D5000CF911F910F91FF900895C1B7B99A83E277 -:101D60008ABD81E083BFAC9A8BB780628BBFBB9A80 -:101D70002FE132E18AE0215030408040E1F700C09D -:101D80000000BB987894E8DD8091E800882321F179 -:101D900082E090E09093F8008093F70013C0CF01A9 -:101DA0008F739927892B21F483E080935700E8955E -:101DB000D3DD8091F7009091F80002969093F8009F -:101DC0008093F700E091F700F091F800E03C94E197 -:101DD000F90728F31092E8008091E700882329F0A2 -:101DE000BBDD75DD1092E700B7DD809162008823CE -:101DF00041F08091FC00811104C08091FB008111B1 -:101E0000C2CF80916200882371F08091E600811139 -:101E10000AC088B5805F88BD88B5811104C08AB5C5 -:101E200090E189278ABD8091E6008F5F8093E6006C -:101E30008EEC90E00197F1F78091F4009091F5001D -:101E400001969093F5008093F4002091F3000097A1 -:101E500011F42F5F00C02093F30030916200311124 -:101E600005C081323EE4930708F05AC03091FC006F -:101E7000332321F08131974208F052C080916200F3 -:101E8000882309F480CF8091FB0081117CCF23301F -:101E900008F479CF45C080916400811149C08CEB72 -:101EA00094E19093FA008093F90081E08093F6002A -:101EB0000EDD3EC0DF01AA0FBB1FAA59BF4F8D9197 -:101EC0009C919F012B7F232B31F4E054FB4E859195 -:101ED0009491805A954FDCDCE091F900F091FA0082 -:101EE000E034F10538F3F3DC10925F0217BA13BE49 -:101EF0001ABC03C081B78F5F81BF81B78C17D0F345 -:101F000003C081B7815081BF81B7C817D0F391E07A -:101F100080E80FB6F89486BD96BD0FBED0CA13C038 -:101F200015BA1BBEF894809165008111B4CFDCCF47 -:101F3000E0E0F0E083E080935700E8951092FA002B -:101F40001092F900C9CF80E090E0DF92EF92FF920B -:101F50000F931F93CF93DF9390E080E80FB6F89430 -:101F600086BD96BD0FBE08E010E0F12C80E8E82E9B -:101F7000DF2CDE0CD1BE1FDBEC01C43389E0D807B7 -:101F80000CF4FD2CE694015011090115110581F79F -:101F90001F2D8FEF8F0D81BF21B730E0812F90E093 -:101FA00001968217930784F006DB8453994097FFCC -:101FB00003C09195819591098C179D0714F4F1B692 -:101FC000EC0181B78F5FE7CFF1BEDF91CF911F9119 -:0E1FD0000F91FF90EF90DF900895F894FFCFEF -:021FDE00FF5AA8 -:04000003000014C025 -:00000001FF diff --git a/bootloaders/gemma/usbconfig.h b/bootloaders/gemma/usbconfig.h deleted file mode 100644 index ca0c021..0000000 --- a/bootloaders/gemma/usbconfig.h +++ /dev/null @@ -1,351 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 or v3 (see License.txt) - */ - -/* Modified by me@frank-zhao.com for project GemmaBoot - * - * GemmaBoot is a bootloader that emulates a USBtinyISP (from Adafruit Industries) - * - * Gemma will use GemmaBoot - * - * This code is heavily derived from USBaspLoader, but also from USBtiny, with USBtinyISP's settings - - Copyright (c) 2013 Adafruit Industries - All rights reserved. - - GemmaBoot is free software: you can redistribute it and/or modify - it under the terms of the GNU Lesser General Public License as - published by the Free Software Foundation, either version 3 of - the License, or (at your option) any later version. - - GemmaBoot is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with GemmaBoot. If not, see - . -*/ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -/* YOU SHOULD NOT NEED TO MODIFY THIS FILE! All configurations are supposed - * to go into bootloaderconfig.h! - */ - -/* ---------------------------- Hardware Config ---------------------------- */ - -/* All the port and pin assignments, as well as the clock speed and CRC - setting are now in bootloaderconfig.h: */ - -#include "bootloaderconfig.h" - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 0 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 10 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#ifndef USB_CFG_IS_SELF_POWERED // allow bootloaderconfig.h to override -#define USB_CFG_IS_SELF_POWERED 0 -#endif -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#ifndef USB_CFG_MAX_BUS_POWER // allow bootloaderconfig.h to override -#define USB_CFG_MAX_BUS_POWER 100 -#endif -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 1 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -#ifndef __ASSEMBLER__ -extern volatile char usbHasRxed; -#endif -#define USB_RX_USER_HOOK(data, len) do { usbHasRxed = 1; } while (0); -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 0 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 1 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID 0x41, 0x23 /* = 0x16c0 = 5824 = voti.nl */ -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - */ -#define USB_CFG_DEVICE_ID 0x9F, 0x0c /* = 0x05dc = 1500 */ -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x01 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'A','r','d','u','i','n','o','.','c','c' -#define USB_CFG_VENDOR_NAME_LEN 10 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'G','e','m','m','a' -#define USB_CFG_DEVICE_NAME_LEN 5 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0xFF /* set to 0 if deferred to interface */ -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */ -#define USB_CFG_INTERFACE_SUBCLASS 0 -#define USB_CFG_INTERFACE_PROTOCOL 0 -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 42 */ -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -#define USB_PUBLIC static -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short // scalar type yields shortest code - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -#define USB_INTR_CFG PCMSK -#define USB_INTR_CFG_SET (1 << USB_CFG_DPLUS_BIT) -#define USB_INTR_CFG_CLR 0 -#define USB_INTR_ENABLE GIMSK -#define USB_INTR_ENABLE_BIT PCIE -#define USB_INTR_PENDING GIFR -#define USB_INTR_PENDING_BIT PCIF -#define USB_INTR_VECTOR PCINT0_vect - -#endif /* __usbconfig_h_included__ */ diff --git a/bootloaders/gemma/usbconfig.patch b/bootloaders/gemma/usbconfig.patch deleted file mode 100644 index 1abb158..0000000 --- a/bootloaders/gemma/usbconfig.patch +++ /dev/null @@ -1,24 +0,0 @@ -203c203 -< #define USB_CFG_VENDOR_ID 0x81, 0x17 /* = 0x16c0 = 5824 = voti.nl */ ---- -> #define USB_CFG_VENDOR_ID 0x41, 0x23 /* = 0x16c0 = 5824 = voti.nl */ -208c208 -< #define USB_CFG_DEVICE_ID 0x9F, 0x0C /* = 0x05dc = 1500 */ ---- -> #define USB_CFG_DEVICE_ID 0x9F, 0x0c /* = 0x05dc = 1500 */ -215c215 -< #define USB_CFG_DEVICE_VERSION 0x05, 0x01 ---- -> #define USB_CFG_DEVICE_VERSION 0x00, 0x01 -218,219c218,219 -< #define USB_CFG_VENDOR_NAME 'A','d','a','f','r','u','i','t' -< #define USB_CFG_VENDOR_NAME_LEN 8 ---- -> #define USB_CFG_VENDOR_NAME 'A','r','d','u','i','n','o','.','c','c' -> #define USB_CFG_VENDOR_NAME_LEN 10 -228,229c228,229 -< #define USB_CFG_DEVICE_NAME 'T','r','i','n','k','e','t' -< #define USB_CFG_DEVICE_NAME_LEN 7 ---- -> #define USB_CFG_DEVICE_NAME 'G','e','m','m','a' -> #define USB_CFG_DEVICE_NAME_LEN 5 -- cgit v1.2.3-18-g5258