From 0ed2d3c95309ecf5905ec06624fc68955fdbd2d0 Mon Sep 17 00:00:00 2001 From: Zach Eveland Date: Tue, 10 Jan 2012 16:29:47 -0500 Subject: renamed DiskLoader to Caterina (after Leonardo's mom) --- bootloaders/diskloader/src/DiskLoader.cpp | 251 --------------- bootloaders/diskloader/src/Platform.h | 49 --- bootloaders/diskloader/src/USBCore.cpp | 510 ------------------------------ bootloaders/diskloader/src/USBCore.h | 246 -------------- bootloaders/diskloader/src/USBDesc.cpp | 83 ----- bootloaders/diskloader/src/USBDesc.h | 60 ---- 6 files changed, 1199 deletions(-) delete mode 100644 bootloaders/diskloader/src/DiskLoader.cpp delete mode 100644 bootloaders/diskloader/src/Platform.h delete mode 100644 bootloaders/diskloader/src/USBCore.cpp delete mode 100644 bootloaders/diskloader/src/USBCore.h delete mode 100644 bootloaders/diskloader/src/USBDesc.cpp delete mode 100644 bootloaders/diskloader/src/USBDesc.h (limited to 'bootloaders/diskloader/src') diff --git a/bootloaders/diskloader/src/DiskLoader.cpp b/bootloaders/diskloader/src/DiskLoader.cpp deleted file mode 100644 index 7ef6fa8..0000000 --- a/bootloaders/diskloader/src/DiskLoader.cpp +++ /dev/null @@ -1,251 +0,0 @@ - - -#include "Platform.h" - -// This bootloader creates a composite Serial device -// -// The serial interface supports a STK500v1 protocol that is very similar to optiboot -// -// The bootloader will timeout and start the firmware after a few hundred milliseconds -// if a usb connection is not detected. -// -// The tweakier code is to keep the bootloader below 2k (no interrupt table, for example) - -extern "C" -void entrypoint(void) __attribute__ ((naked)) __attribute__ ((section (".vectors"))); -void entrypoint(void) -{ - asm volatile ( - "eor r1, r1\n" // Zero register - "out 0x3F, r1\n" // SREG - "ldi r28, 0xFF\n" - "ldi r29, 0x0A\n" - "out 0x3E, r29\n" // SPH - "out 0x3D, r28\n" // SPL - "rjmp main" // Stack is all set up, start the main code - ::); -} - -uint8_t _flashbuf[128]; -uint8_t _inSync; -uint8_t _ok; -extern volatile uint8_t _ejected; -extern volatile uint16_t _timeout; - -void Program(uint8_t ep, uint16_t page, uint8_t count) -{ - uint8_t write = page < 30*1024; // Don't write over firmware please - if (write) - boot_page_erase(page); - - Recv(ep,_flashbuf,count); // Read while page is erasing - - if (!write) - return; - - boot_spm_busy_wait(); // Wait until the memory is erased. - - count >>= 1; - uint16_t* p = (uint16_t*)page; - uint16_t* b = (uint16_t*)_flashbuf; - for (uint8_t i = 0; i < count; i++) - boot_page_fill(p++, b[i]); - - boot_page_write(page); - boot_spm_busy_wait(); - boot_rww_enable (); -} - -void StartSketch(); -int USBGetChar(); -#define getch USBGetChar - -#define HW_VER 0x02 -#define SW_MAJOR 0x01 -#define SW_MINOR 0x10 - -#define STK_OK 0x10 -#define STK_INSYNC 0x14 // ' ' -#define CRC_EOP 0x20 // 'SPACE' -#define STK_GET_SYNC 0x30 // '0' - -#define STK_GET_PARAMETER 0x41 // 'A' -#define STK_SET_DEVICE 0x42 // 'B' -#define STK_SET_DEVICE_EXT 0x45 // 'E' -#define STK_LOAD_ADDRESS 0x55 // 'U' -#define STK_UNIVERSAL 0x56 // 'V' -#define STK_PROG_PAGE 0x64 // 'd' -#define STK_READ_PAGE 0x74 // 't' -#define STK_READ_SIGN 0x75 // 'u' - -extern const uint8_t _readSize[] PROGMEM; -const uint8_t _readSize[] = -{ - STK_GET_PARAMETER, 1, - STK_SET_DEVICE, 20, - STK_SET_DEVICE_EXT, 5, - STK_UNIVERSAL, 4, - STK_LOAD_ADDRESS, 2, - STK_PROG_PAGE, 3, - STK_READ_PAGE, 3, - 0,0 -}; - -extern const uint8_t _consts[] PROGMEM; -const uint8_t _consts[] = -{ - SIGNATURE_0, - SIGNATURE_1, - SIGNATURE_2, - HW_VER, // Hardware version - SW_MAJOR, // Software major version - SW_MINOR, // Software minor version - 0x03, // Unknown but seems to be required by avr studio 3.56 - 0x00, // -}; - - -void USBInit(void); -int main(void) __attribute__ ((naked)); - -// STK500v1 main loop, very similar to optiboot in protocol and implementation -int main() -{ - uint8_t MCUSR_state = MCUSR; // store the reason for the reset - MCUSR &= ~(1 << WDRF); // must clear the watchdog reset flag before disabling and reenabling WDT - wdt_disable(); - TX_LED_OFF(); - RX_LED_OFF(); - L_LED_OFF(); - if (MCUSR_state & (1< 2) - i = (i == 0x18) ? 3 : 4; // 0x80:HW_VER,0x81:SW_MAJOR,0x82:SW_MINOR,0x18:3 or 0 - pgm = _consts + i + 3; - send = 1; - } - - else if (STK_UNIVERSAL == cmd) - { - if (packet[0] == 0x30) - pgm = _consts + packet[2]; // read signature - send = 1; - } - - // Read signature bytes - else if (STK_READ_SIGN == cmd) - { - pgm = _consts; - send = 3; - } - - else if (STK_LOAD_ADDRESS == cmd) - { - address = *((uint16_t*)packet); // word addresses - address += address; - } - - else if (STK_PROG_PAGE == cmd) - { - Program(CDC_RX,address,packet[1]); - } - - else if (STK_READ_PAGE == cmd) - { - send = packet[1]; - pgm = (const uint8_t*)address; - address += send; // not sure of this is required - } - - // Check sync - if (getch() != ' ') - break; - Transfer(CDC_TX,&_inSync,1); - - // Send result - if (send) - Transfer(CDC_TX|TRANSFER_PGM,pgm,send); // All from pgm memory - - // Send ok - Transfer(CDC_TX|TRANSFER_RELEASE,&_ok,1); - - if (cmd == 'Q') - break; - } - _timeout = 500; // wait a moment before exiting the bootloader - may need to finish responding to 'Q' for example - _ejected = 1; - } -} - -// Nice breathing LED indicates we are in the firmware -uint16_t _pulse; -void LEDPulse() -{ - _pulse += 4; - uint8_t p = _pulse >> 9; - if (p > 63) - p = 127-p; - p += p; - if (((uint8_t)_pulse) > p) - L_LED_OFF(); - else - L_LED_ON(); -} - -void StartSketch() -{ - TX_LED_OFF(); // switch off the RX and TX LEDs before starting the user sketch - RX_LED_OFF(); - UDCON = 1; // Detach USB - UDIEN = 0; - asm volatile ( // Reset vector to run firmware - "clr r30\n" - "clr r31\n" - "ijmp\n" - ::); -} - -void Reset() -{ - wdt_enable(WDTO_15MS); // reset the microcontroller to reinitialize all IO and other registers - for (;;) - ; -} diff --git a/bootloaders/diskloader/src/Platform.h b/bootloaders/diskloader/src/Platform.h deleted file mode 100644 index 9d18e80..0000000 --- a/bootloaders/diskloader/src/Platform.h +++ /dev/null @@ -1,49 +0,0 @@ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) -#define DISABLE_JTAG() MCUCR = (1 << JTD) | (1 << IVCE) | (0 << PUD); MCUCR = (1 << JTD) | (0 << IVSEL) | (0 << IVCE) | (0 << PUD); - -#define USB_PID_LEONARDO_BOOTLOADER 0x0030 -#define USB_PID_MICRO_BOOTLOADER 0x0031 -#define USB_VID 0x2341 // arduino LLC vid -#define USB_PID ARDUINO_MODEL_PID // passed in by Makefile - 0x0034 for Leonardo, 0x0035 for MIcro - -#define USB_SERIAL_STRING '0','0','0','0','0','0','0','0','1','7','0','1' - -#define OEM_NAME 'l','e','o','n','a','r','d','o' // 8 chars -#define BOARD_INIT() DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5); CPU_PRESCALE(0); DISABLE_JTAG(); -#define L_LED_OFF() PORTC &= ~(1<<7) -#define L_LED_ON() PORTC |= (1<<7) -#define TX_LED_OFF() PORTD |= (1<<5) -#define TX_LED_ON() PORTD &= ~(1<<5) -#define RX_LED_OFF() PORTB |= (1<<0) -#define RX_LED_ON() PORTB &= ~(1<<0) - -#define TRANSFER_PGM 0x80 -#define TRANSFER_RELEASE 0x40 -#define TRANSFER_ZERO 0x20 - -void Transfer(uint8_t ep, const uint8_t* data, int len); -void Recv(uint8_t ep, uint8_t* dst, uint8_t len); -void Program(uint8_t ep, uint16_t page, uint8_t count); - -/* HID is not fully-supported in the bootloader - can be enabled - for testing, but note the descriptor report and other parts are - not complete */ -//#define HID_ENABLED - -#include "USBCore.h" -#include "USBDesc.h" - - diff --git a/bootloaders/diskloader/src/USBCore.cpp b/bootloaders/diskloader/src/USBCore.cpp deleted file mode 100644 index ac5d081..0000000 --- a/bootloaders/diskloader/src/USBCore.cpp +++ /dev/null @@ -1,510 +0,0 @@ - - -/* Copyright (c) 2010, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" - -#define CDC_TX CDC_ENDPOINT_IN -#define CDC_RX CDC_ENDPOINT_OUT - -#define EP_TYPE_CONTROL 0x00 -#define EP_TYPE_BULK_IN 0x81 -#define EP_TYPE_BULK_OUT 0x80 -#define EP_TYPE_INTERRUPT_IN 0xC1 -#define EP_TYPE_INTERRUPT_OUT 0xC0 -#define EP_TYPE_ISOCHRONOUS_IN 0x41 -#define EP_TYPE_ISOCHRONOUS_OUT 0x40 - -/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ -#define TX_RX_LED_PULSE_MS 100 -uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ -uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ - -void Reset(); - -//================================================================== -//================================================================== - -typedef struct -{ - uint32_t dwDTERate; - uint8_t bCharFormat; - uint8_t bParityType; - uint8_t bDataBits; - uint8_t lineState; -} LineInfo; - -static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; - -//================================================================== -//================================================================== - -// 4 bytes of RAM -volatile uint8_t _usbConfiguration; -volatile uint8_t _ejected; -volatile uint16_t _timeout; - -static inline void WaitIN(void) -{ - while (!(UEINTX & (1<> 8) - -#define RAWHID_USAGE_PAGE 0xFFC0 -#define RAWHID_USAGE 0x0C00 -#define RAWHID_TX_SIZE 64 -#define RAWHID_RX_SIZE 64 - -const uint8_t _rawHID[] = -{ - // RAW HID - 0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30 - 0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE), - - 0xA1, 0x01, // Collection 0x01 - 0x85, 0x03, // REPORT_ID (3) - 0x75, 0x08, // report size = 8 bits - 0x15, 0x00, // logical minimum = 0 - 0x26, 0xFF, 0x00, // logical maximum = 255 - - 0x95, 64, // report count TX - 0x09, 0x01, // usage - 0x81, 0x02, // Input (array) - - 0x95, 64, // report count RX - 0x09, 0x02, // usage - 0x91, 0x02, // Output (array) - 0xC0 // end collection -}; - -uint8_t _cdcComposite = 0; - -bool SendDescriptor() -{ - Setup& setup = _setup; - uint16_t desc_length = 0; - const uint8_t* desc_addr = 0; - - uint8_t t = setup.wValueH; - if (0x22 == t) - { -#ifdef HID_ENABLED - desc_addr = _rawHID; - desc_length = sizeof(desc_length); -#endif - } else if (USB_DEVICE_DESCRIPTOR_TYPE == t) - { - desc_addr = (const uint8_t*)&USB_DeviceDescriptor; - } - else if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t) - { - desc_addr = (const uint8_t*)&USB_ConfigDescriptor; - desc_length = sizeof(USB_ConfigDescriptor); - } - else if (USB_STRING_DESCRIPTOR_TYPE == t) - { - if (setup.wValueL == 0) - desc_addr = (const uint8_t*)&STRING_LANGUAGE; - else if (setup.wValueL == IPRODUCT) - desc_addr = (const uint8_t*)&STRING_IPRODUCT; - else if (setup.wValueL == ISERIAL) - desc_addr = (const uint8_t*)&STRING_SERIAL; - else if (setup.wValueL == IMANUFACTURER) - desc_addr = (const uint8_t*)&STRING_IMANUFACTURER; - else - return false; - } else - return false; - - if (desc_length == 0) - desc_length = pgm_read_byte(desc_addr); - if (setup.wLength < desc_length) - desc_length = setup.wLength; - - // Send descriptor - // EP0 is 64 bytes long - // RWAL and FIFOCON don't work on EP0 - uint16_t n = 0; - do - { - if (!WaitForINOrOUT()) - return false; - Send8(pgm_read_byte(&desc_addr[n++])); - uint8_t clr = n & 0x3F; - if (!clr) - ClearIN(); // Fifo is full, release this packet - } while (n < desc_length); - return true; -} - -void USBSetupInterrupt() -{ - SetEP(0); - if (!ReceivedSetupInt()) - return; - - Setup& setup = _setup; // global saves ~30 bytes - Recv((uint8_t*)&setup,8); - ClearSetupInt(); - - if (setup.bmRequestType & DEVICETOHOST) - WaitIN(); - else - ClearIN(); - - bool ok = true; - uint8_t r = setup.bRequest; - if (SET_ADDRESS == r) - { - WaitIN(); - UDADDR = setup.wValueL | (1<> 8) & 0xFF) - -#define CDC_V1_10 0x0110 -#define CDC_COMMUNICATION_INTERFACE_CLASS 0x02 - -#define CDC_CALL_MANAGEMENT 0x01 -#define CDC_ABSTRACT_CONTROL_MODEL 0x02 -#define CDC_HEADER 0x00 -#define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02 -#define CDC_UNION 0x06 -#define CDC_CS_INTERFACE 0x24 -#define CDC_CS_ENDPOINT 0x25 -#define CDC_DATA_INTERFACE_CLASS 0x0A - - -// Device -typedef struct { - uint8_t len; // 18 - uint8_t dtype; // 1 USB_DEVICE_DESCRIPTOR_TYPE - uint16_t usbVersion; // 0x200 - uint8_t deviceClass; - uint8_t deviceSubClass; - uint8_t deviceProtocol; - uint8_t packetSize0; // Packet 0 - uint16_t idVendor; - uint16_t idProduct; - uint16_t deviceVersion; // 0x100 - uint8_t iManufacturer; - uint8_t iProduct; - uint8_t iSerialNumber; - uint8_t bNumConfigurations; -} DeviceDescriptor; - -// Config -typedef struct { - uint8_t len; // 9 - uint8_t dtype; // 2 - uint16_t clen; // total length - uint8_t numInterfaces; - uint8_t config; - uint8_t iconfig; - uint8_t attributes; - uint8_t maxPower; -} ConfigDescriptor; - -// String - -// Interface -typedef struct -{ - uint8_t len; // 9 - uint8_t dtype; // 4 - uint8_t number; - uint8_t alternate; - uint8_t numEndpoints; - uint8_t interfaceClass; - uint8_t interfaceSubClass; - uint8_t protocol; - uint8_t iInterface; -} InterfaceDescriptor; - -// Endpoint -typedef struct -{ - uint8_t len; // 7 - uint8_t dtype; // 5 - uint8_t addr; - uint8_t attr; - uint16_t packetSize; - uint8_t interval; -} EndpointDescriptor; - -// Interface Association Descriptor -// Used to bind 2 interfaces together in CDC compostite device -typedef struct -{ - uint8_t len; // 8 - uint8_t dtype; // 11 - uint8_t firstInterface; - uint8_t interfaceCount; - uint8_t functionClass; - uint8_t funtionSubClass; - uint8_t functionProtocol; - uint8_t iInterface; -} IADDescriptor; - -// CDC CS interface descriptor -typedef struct -{ - uint8_t len; // 5 - uint8_t dtype; // 0x24 - uint8_t subtype; - uint8_t d0; - uint8_t d1; -} CDCCSInterfaceDescriptor; - -typedef struct -{ - uint8_t len; // 4 - uint8_t dtype; // 0x24 - uint8_t subtype; - uint8_t d0; -} CDCCSInterfaceDescriptor4; - -typedef struct -{ - IADDescriptor iad; // Only needed on compound device - - // Control - InterfaceDescriptor cif; // - CDCCSInterfaceDescriptor header; - CDCCSInterfaceDescriptor callManagement; - CDCCSInterfaceDescriptor4 controlManagement; - CDCCSInterfaceDescriptor functionalDescriptor; - EndpointDescriptor cifin; - - // Data - InterfaceDescriptor dif; - EndpointDescriptor in; - EndpointDescriptor out; -} CDCDescriptor; - -typedef struct -{ - uint8_t len; // 9 - uint8_t dtype; // 0x21 - uint8_t addr; - uint8_t versionL; // 0x101 - uint8_t versionH; // 0x101 - uint8_t country; - uint8_t desctype; // 0x22 report - uint8_t descLenL; - uint8_t descLenH; -} HIDDescDescriptor; - -typedef struct -{ - InterfaceDescriptor hid; - HIDDescDescriptor desc; - EndpointDescriptor in; -} HIDDescriptor; - -#define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \ - { 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs } - -#define D_CONFIG(_totalLength,_interfaces) \ - { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(100) } - -#define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \ - { 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 } - -#define D_ENDPOINT(_addr,_attr,_packetSize, _interval) \ - { 7, 5, _addr,_attr,_packetSize, _interval } - -#define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \ - { 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 } - -#define D_HIDREPORT(_descriptorLength) \ - { 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 } - -#define D_CDCCS(_subtype,_d0,_d1) { 5, 0x24, _subtype, _d0, _d1 } -#define D_CDCCS4(_subtype,_d0) { 4, 0x24, _subtype, _d0 } - -#endif \ No newline at end of file diff --git a/bootloaders/diskloader/src/USBDesc.cpp b/bootloaders/diskloader/src/USBDesc.cpp deleted file mode 100644 index a634d4d..0000000 --- a/bootloaders/diskloader/src/USBDesc.cpp +++ /dev/null @@ -1,83 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" - -//==================================================================================================== -//==================================================================================================== -// Actual device descriptors - -const uint16_t STRING_LANGUAGE[2] = { - (3<<8) | (2+2), - 0x0409 // English -}; - -const uint16_t STRING_SERIAL[13] = { - (3<<8) | (2+2*12), - USB_SERIAL_STRING -}; - -const uint16_t STRING_IPRODUCT[28] = { - (3<<8) | (2+2*27), -#if USB_PID == USB_PID_LEONARDO_BOOTLOADER - 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o',' ','b','o','o','t','l','o','a','d','e','r' -#elif USB_PID == USB_PID_MICRO_BOOTLOADER - 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ','b','o','o','t','l','o','a','d','e','r',' ',' ',' ' -#endif -}; - -const uint16_t STRING_IMANUFACTURER[12] = { - (3<<8) | (2+2*11), - 'A','r','d','u','i','n','o',' ','L','L','C' -}; - - -DeviceDescriptor USB_DeviceDescriptor = D_DEVICE(0X02,0X00,0X00,64,USB_VID,USB_PID,0x100,0,IPRODUCT,ISERIAL,1); - -Config USB_ConfigDescriptor = -{ - D_CONFIG(sizeof(Config),INTERFACE_COUNT), - - // CDC - { - D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), - - // CDC communication interface - D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), - D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) - D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management - D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,2), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported - D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), - - // CDC data interface - D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), - D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) - }, - -#ifdef HID_ENABLED - // HID - { - D_INTERFACE(HID_INTERFACE,1,3,0,0), - D_HIDREPORT(30), - D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x40) - } -#endif -}; - diff --git a/bootloaders/diskloader/src/USBDesc.h b/bootloaders/diskloader/src/USBDesc.h deleted file mode 100644 index fa962e9..0000000 --- a/bootloaders/diskloader/src/USBDesc.h +++ /dev/null @@ -1,60 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#ifndef HID_ENABLED // HID is NOT enabled - #define CDC_ACM_INTERFACE 0 // CDC ACM - #define CDC_DATA_INTERFACE 1 // CDC Data - #define CDC_ENDPOINT_ACM 1 - #define CDC_ENDPOINT_OUT 2 - #define CDC_ENDPOINT_IN 3 - #define INTERFACE_COUNT 2 // 2 for CDC -#else // HID is enabled - #define CDC_ACM_INTERFACE 0 // CDC ACM - #define CDC_DATA_INTERFACE 1 // CDC Data - #define CDC_ENDPOINT_ACM 1 - #define CDC_ENDPOINT_OUT 2 - #define CDC_ENDPOINT_IN 3 - #define HID_INTERFACE 2 // HID Interface - #define HID_ENDPOINT_INT 4 - #define INTERFACE_COUNT 3 // 2 for CDC + 1 for hid -#endif - -typedef struct -{ - ConfigDescriptor config; - CDCDescriptor cdc; -#ifdef HID_ENABLED - HIDDescriptor hid; -#endif -} Config; - -extern Config USB_ConfigDescriptor PROGMEM; -extern DeviceDescriptor USB_DeviceDescriptor PROGMEM; -extern DeviceDescriptor USB_DeviceDescriptorA PROGMEM; - -extern const uint16_t STRING_LANGUAGE[2] PROGMEM; -extern const uint16_t STRING_IPRODUCT[28] PROGMEM; -extern const uint16_t STRING_IMANUFACTURER[12] PROGMEM; -extern const uint16_t STRING_SERIAL[13] PROGMEM; - -#define IMANUFACTURER 1 -#define IPRODUCT 2 -#define ISERIAL 3 - -#define CDC_TX CDC_ENDPOINT_IN -#define CDC_RX CDC_ENDPOINT_OUT \ No newline at end of file -- cgit v1.2.3-18-g5258