From d76d58a12e6982c54ca8a1d51b96fb9f864fc569 Mon Sep 17 00:00:00 2001
From: Martyn Ranyard <ranyardm@gmail.com>
Date: Fri, 2 Nov 2012 21:45:58 +0000
Subject: Bootloaders: adds support for 328-nonp chips

---
 bootloaders/atmega/ATmegaBOOT_168.c      | 21 +++++++++++++--------
 bootloaders/atmega/Makefile              | 25 ++++++++++++++++++++-----
 bootloaders/bt/ATmegaBOOT_168.c          | 21 +++++++++++++--------
 bootloaders/optiboot/optiboot.c          |  2 +-
 bootloaders/optiboot/pin_defs.h          |  2 +-
 bootloaders/stk500v2/avrinterruptnames.h |  8 ++++----
 6 files changed, 52 insertions(+), 27 deletions(-)

diff --git a/bootloaders/atmega/ATmegaBOOT_168.c b/bootloaders/atmega/ATmegaBOOT_168.c
index 90899a2..d0d4dab 100644
--- a/bootloaders/atmega/ATmegaBOOT_168.c
+++ b/bootloaders/atmega/ATmegaBOOT_168.c
@@ -73,7 +73,7 @@
 
 /* the current avr-libc eeprom functions do not support the ATmega168 */
 /* own eeprom write/read functions are used instead */
-#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__)
+#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__) || !defined(__AVR_ATmega328__)
 #include <avr/eeprom.h>
 #endif
 
@@ -202,6 +202,11 @@
 #define SIG3	0x0F
 #define PAGE_SIZE	0x40U	//64 words
 
+#elif defined __AVR_ATmega328__
+#define SIG2	0x95
+#define SIG3	0x14
+#define PAGE_SIZE	0x40U	//64 words
+
 #elif defined __AVR_ATmega162__
 #define SIG2	0x94
 #define SIG3	0x04
@@ -367,7 +372,7 @@ int main(void)
 	UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
 	UCSRA = 0x00;
 	UCSRB = _BV(TXEN)|_BV(RXEN);	
-#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__)
 
 #ifdef DOUBLE_SPEED
 	UCSR0A = (1<<U2X0); //Double speed mode USART0
@@ -556,7 +561,7 @@ int main(void)
 			if (flags.eeprom) {		                //Write to EEPROM one byte at a time
 				address.word <<= 1;
 				for(w=0;w<length.word;w++) {
-#if defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__)
+#if defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 					while(EECR & (1<<EEPE));
 					EEAR = (uint16_t)(void *)address.word;
 					EEDR = buff[w];
@@ -677,7 +682,7 @@ int main(void)
 					 "rjmp	write_page	\n\t"
 					 "block_done:		\n\t"
 					 "clr	__zero_reg__	\n\t"	//restore zero register
-#if defined __AVR_ATmega168__  || __AVR_ATmega328P__ || __AVR_ATmega128__ || __AVR_ATmega1280__ || __AVR_ATmega1281__ 
+#if defined __AVR_ATmega168__  || __AVR_ATmega328P__ || __AVR_ATmega328__ || __AVR_ATmega128__ || __AVR_ATmega1280__ || __AVR_ATmega1281__ 
 					 : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"
 #else
 					 : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"
@@ -710,7 +715,7 @@ int main(void)
 			putch(0x14);
 			for (w=0;w < length.word;w++) {		        // Can handle odd and even lengths okay
 				if (flags.eeprom) {	                        // Byte access EEPROM read
-#if defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__)
+#if defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 					while(EECR & (1<<EEPE));
 					EEAR = (uint16_t)(void *)address.word;
 					EECR |= (1<<EERE);
@@ -926,7 +931,7 @@ void putch(char ch)
 		while (!(UCSR1A & _BV(UDRE1)));
 		UDR1 = ch;
 	}
-#elif defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__)
 	while (!(UCSR0A & _BV(UDRE0)));
 	UDR0 = ch;
 #else
@@ -964,7 +969,7 @@ char getch(void)
 		return UDR1;
 	}
 	return 0;
-#elif defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__)
 	uint32_t count = 0;
 	while(!(UCSR0A & _BV(RXC0))){
 		/* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/               
@@ -1001,7 +1006,7 @@ void getNch(uint8_t count)
 			while(!(UCSR1A & _BV(RXC1)));
 			UDR1;
 		}
-#elif defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__)
 		getch();
 #else
 		/* m8,16,32,169,8515,8535,163 */
diff --git a/bootloaders/atmega/Makefile b/bootloaders/atmega/Makefile
index 52e486b..efe92e6 100755
--- a/bootloaders/atmega/Makefile
+++ b/bootloaders/atmega/Makefile
@@ -50,7 +50,7 @@ STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
 OBJ        = $(PROGRAM).o
 OPTIMIZE   = -Os
 
-DEFS       = 
+DEFS       =
 LIBS       =
 
 CC         = avr-gcc
@@ -128,7 +128,7 @@ pro20_isp: isp
 
 diecimila: TARGET = diecimila
 diecimila: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1'
-diecimila: AVR_FREQ = 16000000L 
+diecimila: AVR_FREQ = 16000000L
 diecimila: $(PROGRAM)_diecimila.hex
 
 diecimila_isp: diecimila
@@ -153,7 +153,7 @@ ng_isp: isp
 atmega328: TARGET = atmega328
 atmega328: MCU_TARGET = atmega328p
 atmega328: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600
-atmega328: AVR_FREQ = 16000000L 
+atmega328: AVR_FREQ = 16000000L
 atmega328: LDSECTION  = --section-start=.text=0x7800
 atmega328: $(PROGRAM)_atmega328.hex
 
@@ -165,10 +165,25 @@ atmega328_isp: LFUSE = FF
 atmega328_isp: EFUSE = 05
 atmega328_isp: isp
 
+atmega328_notp: TARGET = atmega328_notp
+atmega328_notp: MCU_TARGET = atmega328
+atmega328_notp: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600
+atmega328_notp: AVR_FREQ = 16000000L
+atmega328_notp: LDSECTION  = --section-start=.text=0x7800
+atmega328_notp: $(PROGRAM)_atmega328_notp.hex
+
+atmega328_notp_isp: atmega328_notp
+atmega328_notp_isp: TARGET = atmega328
+atmega328_notp_isp: MCU_TARGET = atmega328
+atmega328_notp_isp: HFUSE = DA
+atmega328_notp_isp: LFUSE = FF
+atmega328_notp_isp: EFUSE = 05
+atmega328_notp_isp: isp
+
 atmega328_pro8: TARGET = atmega328_pro_8MHz
 atmega328_pro8: MCU_TARGET = atmega328p
 atmega328_pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED
-atmega328_pro8: AVR_FREQ = 8000000L 
+atmega328_pro8: AVR_FREQ = 8000000L
 atmega328_pro8: LDSECTION  = --section-start=.text=0x7800
 atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex
 
@@ -183,7 +198,7 @@ atmega328_pro8_isp: isp
 mega: TARGET = atmega1280
 mega: MCU_TARGET = atmega1280
 mega: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600
-mega: AVR_FREQ = 16000000L 
+mega: AVR_FREQ = 16000000L
 mega: LDSECTION  = --section-start=.text=0x1F000
 mega: $(PROGRAM)_atmega1280.hex
 
diff --git a/bootloaders/bt/ATmegaBOOT_168.c b/bootloaders/bt/ATmegaBOOT_168.c
index c73eefa..7ce2832 100644
--- a/bootloaders/bt/ATmegaBOOT_168.c
+++ b/bootloaders/bt/ATmegaBOOT_168.c
@@ -79,7 +79,7 @@
 
 /* the current avr-libc eeprom functions do not support the ATmega168 */
 /* own eeprom write/read functions are used instead */
-#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__)
+#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__) || !defined(__AVR_ATmega328__)
 #include <avr/eeprom.h>
 #endif
 
@@ -194,6 +194,11 @@
 #define SIG3	0x0F
 #define PAGE_SIZE	0x40U	//64 words
 
+#elif defined __AVR_ATmega328__
+#define SIG2	0x95
+#define SIG3	0x14
+#define PAGE_SIZE	0x40U	//64 words
+
 #elif defined __AVR_ATmega162__
 #define SIG2	0x94
 #define SIG3	0x04
@@ -335,7 +340,7 @@ int main(void)
     UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
     UCSRA = 0x00;
     UCSRB = _BV(TXEN)|_BV(RXEN);	
-#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 
 	UBRR0H = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1) >> 8;
 	UBRR0L = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1);
@@ -557,7 +562,7 @@ putch(0x0D);
 	    if (getch() == ' ') {
 		if (flags.eeprom) {		                //Write to EEPROM one byte at a time
 		    for(w=0;w<length.word;w++) {
-#if defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__)
+#if defined(__AVR_ATmega168__)  || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 			while(EECR & (1<<EEPE));
 			EEAR = (uint16_t)(void *)address.word;
 			EEDR = buff[w];
@@ -675,7 +680,7 @@ putch(0x0D);
 				 "rjmp	write_page	\n\t"
 				 "block_done:		\n\t"
 				 "clr	__zero_reg__	\n\t"	//restore zero register
-#if defined __AVR_ATmega168__  || __AVR_ATmega328P__
+#if defined __AVR_ATmega168__  || __AVR_ATmega328P__ || __AVR_ATmega_328__
 				 : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"
 #else
 				 : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"
@@ -707,7 +712,7 @@ putch(0x0D);
 		putch(0x14);
 		for (w=0;w < length.word;w++) {		        // Can handle odd and even lengths okay
 		    if (flags.eeprom) {	                        // Byte access EEPROM read
-#if defined __AVR_ATmega168__  || __AVR_ATmega328P__
+#if defined __AVR_ATmega168__  || __AVR_ATmega328P__ || __AVR_ATmega328__
 			while(EECR & (1<<EEPE));
 			EEAR = (uint16_t)(void *)address.word;
 			EECR |= (1<<EERE);
@@ -921,7 +926,7 @@ void putch(char ch)
 	while (!(UCSR1A & _BV(UDRE1)));
 	UDR1 = ch;
     }
-#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
     while (!(UCSR0A & _BV(UDRE0)));
     UDR0 = ch;
 #else
@@ -944,7 +949,7 @@ char getch(void)
 	return UDR1;
     }
     return 0;
-#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
     uint32_t count = 0;
     while(!(UCSR0A & _BV(RXC0))){
     	/* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/               
@@ -982,7 +987,7 @@ void getNch(uint8_t count)
 	    while(!(UCSR1A & _BV(RXC1)));
 	    UDR1;
 	}
-#elif (defined __AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+#elif (defined __AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 	while(!(UCSR0A & _BV(RXC0)));
 	UDR0;
 #else
diff --git a/bootloaders/optiboot/optiboot.c b/bootloaders/optiboot/optiboot.c
index 41545b7..bd3a1db 100644
--- a/bootloaders/optiboot/optiboot.c
+++ b/bootloaders/optiboot/optiboot.c
@@ -231,7 +231,7 @@ void appStart() __attribute__ ((naked));
 #if defined(__AVR_ATmega168__)
 #define RAMSTART (0x100)
 #define NRWWSTART (0x3800)
-#elif defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 #define RAMSTART (0x100)
 #define NRWWSTART (0x7000)
 #elif defined (__AVR_ATmega644P__)
diff --git a/bootloaders/optiboot/pin_defs.h b/bootloaders/optiboot/pin_defs.h
index 27d7772..61ce64e 100644
--- a/bootloaders/optiboot/pin_defs.h
+++ b/bootloaders/optiboot/pin_defs.h
@@ -1,4 +1,4 @@
-#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega88) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__)
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega88) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__)
 /* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */ 
 #define LED_DDR     DDRB
 #define LED_PORT    PORTB
diff --git a/bootloaders/stk500v2/avrinterruptnames.h b/bootloaders/stk500v2/avrinterruptnames.h
index f862f9a..e7e3ed9 100644
--- a/bootloaders/stk500v2/avrinterruptnames.h
+++ b/bootloaders/stk500v2/avrinterruptnames.h
@@ -327,8 +327,8 @@
 
 
 //**************************************************************************************************
-#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
-#pragma mark __AVR_ATmega168__ / __AVR_ATmega328P__
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
+#pragma mark __AVR_ATmega168__ / __AVR_ATmega328P__ / __AVR_ATmega328__
 
 #define	_INTERRUPT_NAMES_DEFINED_
 
@@ -496,8 +496,8 @@ PGM_P gInterruptNameTable[]	PROGMEM =
 
 
 //**************************************************************************************************
-#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644__ ) || defined(__AVR_ATmega644P__)
-#pragma mark __AVR_ATmega324P__  __AVR_ATmega644__ __AVR_ATmega644P__ 
+#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644__ ) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
+#pragma mark __AVR_ATmega324P__  __AVR_ATmega644__ __AVR_ATmega644P__ __AVR_ATmega1284P__
 
 #define	_INTERRUPT_NAMES_DEFINED_
 
-- 
cgit v1.2.3-18-g5258