arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2011-08-31	Moving serialEvent() calls from RX interrupts to main for() loop (after loop()).	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=584
2011-08-26	Moving write errors out of return value into separate API methods.	David A. Mellis
	write(), print(), println() now return size_t (and don't use negative values to signal errors). Print adds writeError() for checking for write errors, clearWriteError() to reset the flag to false, and a protected setWriteError() for signalling errors. http://code.google.com/p/arduino/issues/detail?id=598
2011-08-26	Changing from long to ssize_t (int) for write(), print(), println() return.	David A. Mellis

2011-08-23	write(), print(), and println() now return number of bytes written.	David A. Mellis
	The type is long, and negative values indicate errors. Needs more testing. http://code.google.com/p/arduino/issues/detail?id=551
2011-05-20	Fixing 300 baud communication for serial.	David A. Mellis
	Because UBBR is only 12 bits, we were overflowing it at 300 baud because of the use of the U2X bit. Now we turn off U2X if it would yield a UBBR value that would overflow. Note that this breaks 300 baud communication with the computer on the Uno and Mega 2560 because the 8U2 USB-serial firmware has this same bug (and previously they cancelled each other out). Since, however, it seems more likely that people will need to use 300 baud to communicate with other (legacy) hardware than with the computer, I'm making this change. Issue for 8U2 firmware bug: http://code.google.com/p/arduino/issues/detail?id=542 http://code.google.com/p/arduino/issues/detail?id=522
2011-05-12	Small optimization in HardwareSerial.	David A. Mellis
	begin(long) -> begin(unsigned long) Conflicts: hardware/arduino/cores/arduino/HardwareSerial.h
2011-05-07	Adding serialEvent(), serialEvent1(), etc.	David A. Mellis
	Called from within the serial receive interrupt. These are implemented as an empty weak function in the core that be overridden by the user's sketch. http://code.google.com/p/arduino/issues/detail?id=263
2011-05-07	Refactoring the UART0 / USART0 receive interrupt handler.	David A. Mellis

2011-05-07	Changing Serial.flush() to write outgoing data, not drop incoming data.	David A. Mellis
	This brings it in line with most other uses of flush(), both in and out of Arduino. http://code.google.com/p/arduino/issues/detail?id=497
2011-03-06	Flushing outgoing and incoming data in Serial.end().	David A. Mellis
	That is, waiting for outgoing data to transmit and dropping any received data.
2011-03-06	Fixing race condition in Serial write (Brian Cook).	David A. Mellis

2011-03-05	Implemented serial transmit buffering.	David A. Mellis
	Now Serial.write() places characters in the transmit buffer, and the data register empty interrupt reads and transmit them. Based loosely on the implementation here: ftp://wookey.org.uk/arduino. http://code.google.com/p/arduino/issues/detail?id=262
2011-03-01	Moving wiring.h contents into Arduino.h.	David A. Mellis

2010-11-11	Cast to encourage optimization of Serial ring buffer index calculations.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=391
2010-11-11	Changing baud rate calculation to always use double speed mode except for ↵	David A. Mellis
	57600 baud at 16 MHz. http://code.google.com/p/arduino/issues/detail?id=394
2010-10-17	Making HardwareSerial tests register-based, not CPU-based.	David A. Mellis
	Mark Sproul's patches, via Christian Maglie. http://code.google.com/p/arduino/issues/detail?id=315
2010-09-08	1280 -> 1280/2560.	David A. Mellis

2010-08-02	changing available() to return an int (because the Ethernet Client class or ↵	David A. Mellis
	another stream might need more than 255 bytes).
2010-07-04	Adding a peek() function to Stream and HardwareSerial (Serial).	David A. Mellis

2010-07-04	Adding support for printing Strings to the Print class.	David A. Mellis

2009-12-23	Adding Serial.end().	David A. Mellis

2009-11-21	Improving third-party hardware support:	David A. Mellis
	- moving back to multple cores per platform - using target instead of platform - moving per-board and per-programmer preferences out of Preferences.java and into a new Target class - adding a new "target" preference - support for platform:value values in board preferences for bootloader path and core - XXX: need to support platform:value syntax for board upload.using preferences.
2009-11-07	Moving things around.	David A. Mellis

2009-07-12	Adding improved baud rate calculation, including use (or not) of the U2X ↵	David A. Mellis
	bit. (Code from gabebear).
2009-07-12	Clearing the U2Xn bit in Serial.begin() (because it is set on the Pro / Pro ↵	David A. Mellis
	Mini 328). Fixing some indentation.
2009-06-01	First integration of the Arduino code in Processing 5503: PreProcessor and ↵	David A. Mellis
	Compiler have been integrated with changes to the Sketch. Compilation still has problems (Thread error on success, and can't handle non-pde files in a sketch). Modified the Mac OS X make.sh to copy the hardware, avr tools, and example over. Removing some of the antlr stuff. Disabling the Commander (command-line execution) for now. Added Library, LibraryManager, and Target. Added support for prefixed preferences (e.g. for boards and programmers).