Age | Commit message (Collapse) | Author | |
---|---|---|---|
2012-01-24 | Caterina now cleanly hands off operation to the sketch | Zach Eveland | |
had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation | |||
2011-12-18 | added asynchronous buffering of received CDC characters | Zach Eveland | |
This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp. Adds public accept() method to CDC. | |||
2011-11-09 | restored original non-interrupt-driven DiskLoader | Zach Eveland | |
Interrupt-driven version was a dead-end - too many bugs with that approach. | |||
2011-10-27 | changes in core and boards.txt to support new bootloader | Zach Eveland | |
old bootloader could fit in only 2 kB of flash. new version has to have a 4 kB block - jump-to address and boards.txt must reflect this. | |||
2011-09-08 | fixed bug where sketches over 28k caused subsequent auto-reset-and-upload ↵ | Zach Eveland | |
attempts to fail. fixed bug in reboot routine, changed fuses to select 1024-word bootloader size, disabled hardware boot enable. | |||
2011-09-06 | changed auto-reset trigger condition to fix auto-reset-and-upload for ↵ | Zach Eveland | |
Windows. now reboots when a port, opened at 1200 bps, is closed. | |||
2011-09-05 | changed baudrate for auto-reset-and-upload back to 1200 bps. specified ↵ | Zach Eveland | |
arduino protocol for Leonardo avrdude upload. | |||
2011-08-30 | on a CDC or HID write() error, call setWriteError(). better handling of ↵ | Zach Eveland | |
USB_Send errors in CDC. | |||
2011-08-30 | support for non-Leonardo boards is back! | Zach Eveland | |
2011-08-30 | CDC and HID write() routines now return non-void - brought in line with new ↵ | Zach Eveland | |
write behavior | |||
2011-08-27 | auto-upload-and-reset works now at 300 bps. patched avrdude for Mac to ↵ | Zach Eveland | |
support 300 bps connection, changed core and boards.txt to match | |||
2011-08-24 | bugfix - Serial.write() would try to send even if no CDC connection was open. | Zach Eveland | |
2011-08-24 | changed auto-reset method for upload: now triggered by opening port at 1200 bps | Zach Eveland | |
2011-08-16 | Temporary fix for auto-reset from IDE. Will reset chip when DTR is ↵ | Zach Eveland | |
asserted, no matter what CDC baud rate is selected. | |||
2011-08-14 | Serial via USB works | Zach Eveland | |
Integrated rest of Peter's USB implementation |