WiFi library to the new format

1 files changed, 0 insertions, 177 deletions

diff --git a/libraries/WiFi/examples/WiFiPachubeClientString/WiFiPachubeClientString.ino b/libraries/WiFi/examples/WiFiPachubeClientString/WiFiPachubeClientString.ino
deleted file mode 100644
index 243fe83..0000000
--- a/libraries/WiFi/examples/WiFiPachubeClientString/WiFiPachubeClientString.ino
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
-  Wifi Pachube sensor client with Strings
- 
- This sketch connects an analog sensor to Pachube (http://www.pachube.com)
- using a Arduino Wifi shield.
- 
- This example is written for a network using WPA encryption. For 
- WEP or WPA, change the Wifi.begin() call accordingly.
- 
- This example has been updated to use version 2.0 of the pachube.com API. 
- To make it work, create a feed with a datastream, and give it the ID
- sensor1. Or change the code below to match your feed.
- 
- This example uses the String library, which is part of the Arduino core from
- version 0019.  
- 
- Circuit:
- * Analog sensor attached to analog in 0
- * Wifi shield attached to pins 10, 11, 12, 13
- 
- created 16 Mar 2012
- modified 31 May 2012
- by Tom Igoe
- modified 8 Sept 2012
- by Scott Fitzgerald
- 
- This code is in the public domain.
- 
- */
-
-#include <SPI.h>
-#include <WiFi.h>
-
-#define APIKEY         "YOUR API KEY GOES HERE" // replace your pachube api key here
-#define FEEDID         00000                    // replace your feed ID
-#define USERAGENT      "My Arduino Project"     // user agent is the project name
-
-char ssid[] = "yourNetwork";      //  your network SSID (name) 
-char pass[] = "secretPassword";   // your network password
-
-int status = WL_IDLE_STATUS;
-
-// initialize the library instance:
-WiFiClient client;
-
-// if you don't want to use DNS (and reduce your sketch size)
-// use the numeric IP instead of the name for the server:
-//IPAddress server(216,52,233,121);      // numeric IP for api.pachube.com
-char server[] = "api.pachube.com";   // name address for pachube API
-
-unsigned long lastConnectionTime = 0;          // last time you connected to the server, in milliseconds
-boolean lastConnected = false;                 // state of the connection last time through the main loop
-const unsigned long postingInterval = 10*1000;  //delay between updates to pachube.com
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    // don't continue:
-    while(true);
-  } 
-  
-  // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
-    Serial.print("Attempting to connect to SSID: ");
-    Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
-    status = WiFi.begin(ssid, pass);
-
-    // wait 10 seconds for connection:
-    delay(10000);
-  } 
-  // you're connected now, so print out the status:
-  printWifiStatus();
-}
-
-void loop() {
-  // read the analog sensor:
-  int sensorReading = analogRead(A0);   
-  // convert the data to a String to send it:
-
-  String dataString = "sensor1,";
-  dataString += sensorReading;
-
-  // you can append multiple readings to this String if your
-  // pachube feed is set up to handle multiple values:
-  int otherSensorReading = analogRead(A1);
-  dataString += "\nsensor2,";
-  dataString += otherSensorReading;
-
-  // if there's incoming data from the net connection.
-  // send it out the serial port.  This is for debugging
-  // purposes only:
-  while (client.available()) {
-    char c = client.read();
-    Serial.print(c);
-  }
-
-  // if there's no net connection, but there was one last time
-  // through the loop, then stop the client:
-  if (!client.connected() && lastConnected) {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-
-  // if you're not connected, and ten seconds have passed since
-  // your last connection, then connect again and send data: 
-  if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
-    sendData(dataString);
-  }
-  // store the state of the connection for next time through
-  // the loop:
-  lastConnected = client.connected();
-}
-
-// this method makes a HTTP connection to the server:
-void sendData(String thisData) {
-  // if there's a successful connection:
-  if (client.connect(server, 80)) {
-    Serial.println("connecting...");
-    // send the HTTP PUT request:
-    client.print("PUT /v2/feeds/");
-    client.print(FEEDID);
-    client.println(".csv HTTP/1.1");
-    client.println("Host: api.pachube.com");
-    client.print("X-ApiKey: ");
-    client.println(APIKEY);
-    client.print("User-Agent: ");
-    client.println(USERAGENT);
-    client.print("Content-Length: ");
-    client.println(thisData.length());
-
-    // last pieces of the HTTP PUT request:
-    client.println("Content-Type: text/csv");
-    client.println("Connection: close");
-    client.println();
-
-    // here's the actual content of the PUT request:
-    client.println(thisData);
-  } 
-  else {
-    // if you couldn't make a connection:
-    Serial.println("connection failed");
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-  // note the time that the connection was made or attempted:
-  lastConnectionTime = millis();
-}
-
-
-void printWifiStatus() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print your WiFi shield's IP address:
-  IPAddress ip = WiFi.localIP();
-  Serial.print("IP Address: ");
-  Serial.println(ip);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.print(rssi);
-  Serial.println(" dBm");
-}
-
-