Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 110 deletions

diff --git a/libraries/GSM/examples/SendSMS/SendSMS.ino b/libraries/GSM/examples/SendSMS/SendSMS.ino
deleted file mode 100644
index 677442a..0000000
--- a/libraries/GSM/examples/SendSMS/SendSMS.ino
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- SMS sender
- 
- This sketch, for the Arduino GSM shield,sends an SMS message 
- you enter in the serial monitor. Connect your Arduino with the 
- GSM shield and SIM card, open the serial monitor, and wait for 
- the "READY" message to appear in the monitor. Next, type a 
- message to send and press "return". Make sure the serial 
- monitor is set to send a newline when you press return.
- 
- Circuit:
- * GSM shield 
- * SIM card that can send SMS
- 
- created 25 Feb 2012
- by Tom Igoe
- 
- This example is in the public domain.
- 
- http://arduino.cc/en/Tutorial/GSMExamplesSendSMS
- 
- */
-
-// Include the GSM library
-#include <GSM.h>
-
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess;
-GSM_SMS sms;
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  Serial.println("SMS Messages Sender");
-
-  // connection state
-  boolean notConnected = true;
-
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  Serial.println("GSM initialized");
-}
-
-void loop()
-{
-
-  Serial.print("Enter a mobile number: ");
-  char remoteNum[20];  // telephone number to send sms
-  readSerial(remoteNum);
-  Serial.println(remoteNum);
-    
-  // sms text
-  Serial.print("Now, enter SMS content: ");
-  char txtMsg[200];
-  readSerial(txtMsg);
-  Serial.println("SENDING");
-  Serial.println();
-  Serial.println("Message:");
-  Serial.println(txtMsg);
-  
-  // send the message
-  sms.beginSMS(remoteNum);
-  sms.print(txtMsg);
-  sms.endSMS(); 
-  Serial.println("\nCOMPLETE!\n");
-}
-
-/*
-  Read input serial
- */
-int readSerial(char result[])
-{
-  int i = 0;
-  while(1)
-  {
-    while (Serial.available() > 0)
-    {
-      char inChar = Serial.read();
-      if (inChar == '\n')
-      {
-        result[i] = '\0';
-        Serial.flush();
-        return 0;
-      }
-      if(inChar!='\r')
-      {
-        result[i] = inChar;
-        i++;
-      }
-    }
-  }
-}