Bridge library to the 1.5 format

1 files changed, 0 insertions, 121 deletions

diff --git a/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino b/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino
deleted file mode 100644
index 2149737..0000000
--- a/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
-  Temperature web interface
- 
- This example shows how to serve data from an analog input  
- via the Arduino Yún's built-in webserver using the Bridge library.
- 	
- The circuit:
- * TMP36 temperature sensor on analog pin A1
- * SD card attached to SD card slot of the Arduino Yún
- 
- Prepare your SD card with an empty folder in the SD root 
- named "arduino" and a subfolder of that named "www". 
- This will ensure that the Yún will create a link 
- to the SD to the "/mnt/sd" path.
- 
- In this sketch folder is a basic webpage and a copy of zepto.js, a 
- minimized version of jQuery.  When you upload your sketch, these files
- will be placed in the /arduino/www/TemperatureWebPanel folder on your SD card.
- 
- You can then go to http://arduino.local/sd/TemperatureWebPanel
- to see the output of this sketch.
- 
- You can remove the SD card while the Linux and the 
- sketch are running but be careful not to remove it while
- the system is writing to it.
- 
- created  6 July 2013
- by Tom Igoe
- 
- 
- This example code is in the public domain.
- 	 
- */
-#include <Bridge.h>
-#include <YunServer.h>
-#include <YunClient.h> 
-
-// Listen on default port 5555, the webserver on the Yun
-// will forward there all the HTTP requests for us.
-YunServer server;
-String startString;
-long hits = 0;
-
-void setup() {
-  Serial.begin(9600);
-
-  // Bridge startup
-  pinMode(13,OUTPUT);
-  digitalWrite(13, LOW);
-  Bridge.begin();
-  digitalWrite(13, HIGH);
-
-  // using A0 and A2 as vcc and gnd for the TMP36 sensor:
-  pinMode(A0, OUTPUT);
-  pinMode(A2, OUTPUT);
-  digitalWrite(A0, HIGH);
-  digitalWrite(A2, LOW);
-
-  // Listen for incoming connection only from localhost
-  // (no one from the external network could connect)
-  server.listenOnLocalhost();
-  server.begin();
-
-  // get the time that this sketch started:
-  Process startTime;
-  startTime.runShellCommand("date");
-  while(startTime.available()) {
-    char c = startTime.read();
-    startString += c;
-  }
-}
-
-void loop() {
-  // Get clients coming from server
-  YunClient client = server.accept();
-
-  // There is a new client?
-  if (client) {
-    // read the command
-    String command = client.readString();
-    command.trim();        //kill whitespace
-    Serial.println(command);
-    // is "temperature" command?
-    if (command == "temperature") {
-
-      // get the time from the server:
-      Process time;
-      time.runShellCommand("date");
-      String timeString = "";
-      while(time.available()) {
-        char c = time.read();
-        timeString += c;
-      }
-      Serial.println(timeString);
-      int sensorValue = analogRead(A1);
-      // convert the reading to millivolts:
-      float voltage = sensorValue *  (5000/ 1024); 
-      // convert the millivolts to temperature celsius:
-      float temperature = (voltage - 500)/10;
-      // print the temperature:
-      client.print("Current time on the Yún: ");
-      client.println(timeString);
-      client.print("<br>Current temperature: ");
-      client.print(temperature);
-      client.print(" degrees C");
-      client.print("<br>This sketch has been running since ");
-      client.print(startString);
-      client.print("<br>Hits so far: ");
-      client.print(hits);
-    }
-
-    // Close connection and free resources.
-    client.stop();
-    hits++;
-  }
-
-  delay(50); // Poll every 50ms
-}
-
-
-