Bridge library to the 1.5 format

1 files changed, 0 insertions, 443 deletions

diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino b/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino
deleted file mode 100644
index 6543935..0000000
--- a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
-  ControlBySMS
-
-  Demonstrates using an SMS message to a Twilio account to turn an LED
-  on the Yun board on and off using the Temboo Arduino Yun SDK.
-  Sending a SMS with the text "LED ON" to your Twilio phone number
-  will turn on the LED on the Yun.  Sending "LED OFF" will turn it off.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  Since this sketch uses Twilio to retrieve the SMS, you'll also need a valid 
-  Twilio account. You can create one for free at https://www.twilio.com.
- 
-  The sketch needs your Twilio Account SID and Auth Token you get when you 
-  register with Twilio.  Make sure to use the Account SID and Auth Token from 
-  your Twilio Dashboard (not your test credentials from the Dev Tools panel).
-
-  Normally, Twilio expects to contact a web site you provide to get a response
-  when an SMS message is received for your Twilio number.  In this case, we 
-  don't want to send any response (and we don't want to have to set up a web
-  site just to receive SMS messages.)  You can use a URL that Twilio provides
-  for this purpose.  When a message is received and sent to the Twilio "twimlets"
-  URL, it returns a code meaning "no response required."  To set this up:
-
-  1. Log in to your Twilio account and go to this URL:
-  
-      https://www.twilio.com/user/account/phone-numbers/incoming
-
-  2. Select the Twilio number you want to receive SMS messages at.
-
-  3. Put this URL in the "SMS Request URL" field:
-
-     http://twimlets.com/echo?Twiml=%3CResponse%3E%3C%2FResponse%3E
-
-     See this link to Twilio's FAQ for details:
-
-     https://www.twilio.com/help/faq/sms/how-can-i-receive-sms-messages-without-responding
-
-  4. Click the "Save Changes" button at the bottom of the page. 
-
-  Your account will now receive SMS messages, but won't send any responses.
-
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet.
-
-  Looking for another API? We've got over 100 in our Library!
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use #define statements to specify these values in a .h file.
-
-// the Account SID from your Twilio account
-const String TWILIO_ACCOUNT_SID = "xxxxxxxxxxxxxxxxxx";
-
-// the Auth Token from your Twilio account
-const String TWILIO_AUTH_TOKEN = "xxxxxxxxxxxxxxxxx";
-
-// only act on messages sent from this phone number. (e.g. 15415551212)
-const String FROM_PHONE_NUMBER = "xxxxxxxxxxx";
-
-// how often (in milliseconds) to check for new SMS messages.
-const unsigned long SMS_CHECK_PERIOD = 60000;
-
-// keep track of when we last checked for new messages
-// (initialize it to SMS_CHECK_PERIOD seconds ago so
-// we do the first check as soon as the sketch starts.)
-unsigned long lastSMSCheckTime = -SMS_CHECK_PERIOD;
-
-// keep track of the ID of the last SMS message we processed.
-// (we only need to process newer messages)
-String lastSid;
-
-// we'll be turning the LED built in to the Yun on and off 
-// to simulate controlling some device.  That LED is on pin 13.
-int LED_PIN = 13;
-
-int numRuns = 1;   // execution count, so this doesn't run forever
-int maxRuns = 10;   // the max number of times the Twitter HomeTimeline Choreo should run
-
-
-void setup() {
-  Serial.begin(9600);
-
-  // for debugging, wait until a serial console is connected
-  delay(4000);
-  while(!Serial);
-
-  // tell the board to treat the LED pin as an output.
-  pinMode(LED_PIN, OUTPUT);
-
-  // start with the LED off
-  digitalWrite(LED_PIN, LOW);
-
-  // initialize the connection to the Linino processor.
-  Bridge.begin();
-
-  // Twilio will report old SMS messages.  We want to 
-  // ignore any existing control messages when we start.
-  Serial.println("Ignoring any existing control messages...");
-  checkForMessages(true);
-
-}
-
-void loop()
-{
-
-  // get the number of milliseconds the CPU has been running.
-  unsigned long now = millis();
-
-  // see if it's time to check for new SMS messages.
-  if (now - lastSMSCheckTime >= SMS_CHECK_PERIOD) {
-    
-    // it's time to check for new messages
-    // save this time so we know when to check next
-    lastSMSCheckTime = now;
-    
-    if (numRuns <= maxRuns) {
-      Serial.println("Checking for new SMS messages - Run #" + String(numRuns++));
-      
-      // execute the choreo and don't ignore control messages. 
-      checkForMessages(false);
-    } else {
-      Serial.println("Already ran " + String(maxRuns) + " times.");
-    }
-  }
-}
-
-/*
-This function executes the Twilio > SMSMessages > ListMessages choreo
-and processes the results.
-
-If ignoreCommands is 'true', this function will read and process messages
-updating 'lastSid', but will not actually take any action on any commands 
-found.  This is so we can ignore any old control messages when we start.
-
-If ignoreCommands is 'false', control messages WILL be acted on.
-*/
-void checkForMessages(bool ignoreCommands) {
-
-  // we need a TembooChoreo object to send a Choreo request to Temboo
-  TembooChoreo ListMessagesChoreo;
-
-  ListMessagesChoreo.begin();
-  
-  // set Temboo account credentials
-  ListMessagesChoreo.setAccountName(TEMBOO_ACCOUNT);
-  ListMessagesChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-  ListMessagesChoreo.setAppKey(TEMBOO_APP_KEY);
-
-  // identify the Temboo Library choreo to run (Twilio > SMSMessages > ListMessages)
-  ListMessagesChoreo.setChoreo("/Library/Twilio/SMSMessages/ListMessages");
-
-  // set the choreo inputs
-  // see https://www.temboo.com/library/Library/Twilio/SMSMessages/ListMessages/ 
-  // for complete details about the inputs for this Choreo
-
-  // the first input is a your Twilio AccountSID
-  ListMessagesChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID);
-  
-  // next is your Twilio Auth Token
-  ListMessagesChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN);
-
-  // we only want to know about messages sent from our designated phone number
-  ListMessagesChoreo.addInput("From", FROM_PHONE_NUMBER);
-
-  // Twilio can return information about up to 1000 messages at a time.
-  // we're only interested in the 3 most recent ones.  Note that if 
-  // this account receives lots of messages in quick succession, 
-  // (more than 3 per minute in this case), we might miss some control
-  // messages.  But if we request too many messages, we might run out of 
-  // memory on the Arduino side of the Yun.
-  ListMessagesChoreo.addInput("PageSize", "3");
-
-  // We want the response in XML format to process with our 
-  // XPath output filters.
-  ListMessagesChoreo.addInput("ResponseFormat", "xml");
-
-  // we don't want everything from the output, just the 
-  // message IDs (the Sids) and the message texts
-  ListMessagesChoreo.addOutputFilter("sid", "Sid", "Response");
-  ListMessagesChoreo.addOutputFilter("text", "Body", "Response");
-
-  // tell the Choreo to run and wait for the results. The 
-  // return code (returnCode) will tell us whether the Temboo client 
-  // was able to send our request to the Temboo servers
-  unsigned int returnCode = ListMessagesChoreo.run();
-
-  // a return code of zero (0) means success
-  if (returnCode == 0) {
-
-    // Need a string to hold the list of message IDs.
-    String messageSids;  
-
-    // Need a string to hold the texts of the messages.
-    String messageTexts;
-
-    // when the choreo results are available, process them.
-    // the output filters we specified will return comma delimited
-    // lists containing the Sids and texts of the messages
-    // from our designated phone number.
-
-    while(ListMessagesChoreo.available()) {
-      
-      // output names are terminated with '\x1F' characters.
-      String name = ListMessagesChoreo.readStringUntil('\x1F');
-      name.trim();
-      //Serial.println(name);
-
-      // output values are terminated with '\x1E' characters.
-      String data = ListMessagesChoreo.readStringUntil('\x1E');
-      data.trim();
-      //Serial.println(data);
-
-      // assign the data to the appropriate string based on the name
-      if (name == "sid") {
-        messageSids = data;
-      } else if (name == "text") {
-        messageTexts = data;
-      }
-    }
-
-    // done reading output, close the Choreo to free up resources.
-    ListMessagesChoreo.close();
-    
-    // parse the comma delimited lists of messages and Sids 
-    processMessages(messageTexts, messageSids, ignoreCommands);
-
-  } else {
-    // a non-zero return code means there was an error
-    // read and print the error message
-    while(ListMessagesChoreo.available()) {
-      char c = ListMessagesChoreo.read();
-      Serial.print(c);
-    }
-  }
-}
-
-/* 
-This function processes the lists of message texts and Sids.
-If a message contains a comma as part of the 
-message text, that message will be enclosed in double quotes
-(") in the list.  Example:
-
-  A message,"Hey, now",Another message text
-
-If the message contains double quotes, it will be enclosed in
-double quotes AND the internal quotes will be doubled.  
-Example:
-
-  "Hi ""Sam"" the man", Led on
-
-NOTE! We are assuming that Twilio returns more recent messages
-first.  This isn't officially documented by Twilio, but we've 
-not seen any other case.
-
-'messageTexts' is a String containing a comma separated list of
-message texts with commas and quotes escaped as described above.
-
-'messageSids' is a String containing a comma separated list of 
-message Sids.  Sids should not contain embedded commas or quotes.
-
-'ignoreCommands' is a boolean. 'true' means and control messages 
-will not be acted upon.  'false' means control messages will be 
-acted upon in the usual way.
-*/
-void processMessages(String messageTexts, String messageSids, bool ignoreCommands) {
-
-  // proceed if we received at least one message
-  if (messageSids.length() > 0) {
-    int i = -1;
-    int sidsStart = 0;
-    int textsStart = 0;
-    String sid;
-    String text;
-    bool ledUpdated = false;
-
-    // go through the list until we run out of items
-    // or otherwise know we can stop
-    do {
-
-      // Output filter list items are separated by commas
-      // find the start of the next item in the list
-      i = messageSids.indexOf(',', sidsStart);
-      if (i >= 0) {
-        
-        //extract a single Sid from the list.
-        sid = messageSids.substring(sidsStart, i);
-        sidsStart = i + 1;
-
-        // find the start of the next text in the list.  
-        // Note that we have to be prepared to handle embedded
-        // quotes and commans in the message texts.  
-        // The standard Arduino String class doesn't handle
-        // this, so we have to write our own function to do it.
-        i = quotedIndexOf(messageTexts, ',', textsStart);
-        if (i >= 0) {
-
-          // extract a single message text from the list.
-          text = messageTexts.substring(textsStart, i);
-          textsStart = i + 1;
-
-          // process the Sid and text to see if it's a 
-          // control message.
-          ledUpdated = processMessage(sid, text, ignoreCommands);
-        }
-      } else {
-        
-        // the last item in the lists won't have a comma at the end,
-        // so we have to handle them specially.
-        // Since we know this is the last item, we can just
-        // take the rest of the string for the Sid and text.
-        sid = messageSids.substring(sidsStart);
-        text = messageTexts.substring(textsStart);
-
-        // process the last item.
-        ledUpdated = processMessage(sid, text, ignoreCommands);
-      }
-
-      // keep going until either we run out of list items
-      // or we run into a message we processed on a previous run.
-    } while ((i >=0) && (sid != lastSid));
-   
-    // print what we've found to the serial monitor, 
-    // just so we can see what's going on.
-    if (sid == lastSid) {
-      if (ledUpdated)
-        Serial.println("Control message processed.");
-      else
-        Serial.println("No new control messages received.");
-    } else {
-      Serial.println("No control messages received.");
-    }
-  } else {
-    Serial.println("No messages found");
-  }
-}
-
-/*
-This function knows how to tell if a message is a control message
-or not.  It also knows know to control whatever it is we're controlling
-(the state of the LED on pin 13 in this case.)
-
-A message with the text "LED ON" turns the LED on.
-A message with the text "LED OFF" turns the LED off.
-(Case is ignored.)
-
-If 'ignoreCommands' is true, the actions described above will NOT 
-take place.  
-
-It also updates the 'lastSid' global variable when 
-a control message is processed.
-
-It returns 'true' if the message was a control message, and
-'false' if it wasn't or if we've already processed this message.
-*/
-bool processMessage(String sid, String text, bool ignoreCommands) {
-  
-  // a flag to indicate whether this was a control message or not
-  bool ledUpdated = false;
-
-  // if we haven't already processed this message
-  if (sid != lastSid) {
-
-    if (text.equalsIgnoreCase("LED ON")) {
-      
-      if (!ignoreCommands) {
-        //turn on the LED
-        digitalWrite(LED_PIN, HIGH);
-        Serial.println("LED ON");
-      }
-      ledUpdated = true;
-    } else if (text.equalsIgnoreCase("LED OFF")) {
-      if (!ignoreCommands) {
-        //turn off the LED
-        digitalWrite(LED_PIN, LOW);
-        Serial.println("LED OFF");
-      }
-      ledUpdated = true;
-    }
-
-    // If the LED state was updated, remember the Sid if this message.
-    if (ledUpdated) 
-      lastSid = sid;
-  }
-  return ledUpdated;
-}
-
-/*
-This function finds the index of a delimiter character in a String,
-ignoring delimiters that appear inside double-quotes.
-*/
-int quotedIndexOf(String s, char delim, int start) {
-  bool inQuotes = false;
-  char c;
-  int index = -1;
-  const char QUOTE = '"';
-  do {
-    c = s[start++];
-    if (c == QUOTE)
-      inQuotes = !inQuotes;
-    else if (c == delim && !inQuotes)
-      index = --start;
-  } while ((c != '\0') && (index < 0));
-  return index;
-}
-
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can save it once, 
-  then just distribute the main .ino file without worrying that you forgot to delete your credentials.
-*/
-