diff options
author | Matthijs Kooijman <matthijs@stdin.nl> | 2013-04-18 21:34:00 +0200 |
---|---|---|
committer | Cristian Maglie <c.maglie@bug.st> | 2014-01-22 09:38:16 +0100 |
commit | dbe23685c27cb1467dc84140e4899a0bf8e23248 (patch) | |
tree | 58a78edb538adb629fa97abc9b70784c3c71cfbf /firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h | |
parent | fa8df58c93844800196453d738bf229a9b44618d (diff) |
Fix lockup when writing to HardwareSerial with interrupts disabled
When interrupts are disabled, writing to HardwareSerial could cause a
lockup. When the tx buffer is full, a busy-wait loop is used to wait for
the interrupt handler to free up a byte in the buffer. However, when
interrupts are disabled, this will of course never happen and the
Arduino will lock up. This often caused lockups when doing (big) debug
printing from an interrupt handler.
Additionally, calling flush() with interrupts disabled while
transmission was in progress would also cause a lockup.
When interrupts are disabled, the code now actively checks the UDRE
(UART Data Register Empty) and calls the interrupt handler to free up
room if the bit is set.
This can lead to delays in interrupt handlers when the serial buffer is
full, but a delay is of course always preferred to a lockup.
Closes: #672
References: #1147
Diffstat (limited to 'firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h')
0 files changed, 0 insertions, 0 deletions