Merged 1.0.5

1 files changed, 239 insertions, 0 deletions

diff --git a/cores/robot/CDC.cpp b/cores/robot/CDC.cpp
new file mode 100644
index 0000000..701e483
--- /dev/null
+++ b/cores/robot/CDC.cpp
@@ -0,0 +1,239 @@
+
+
+/* Copyright (c) 2011, Peter Barrett  
+**  
+** Permission to use, copy, modify, and/or distribute this software for  
+** any purpose with or without fee is hereby granted, provided that the  
+** above copyright notice and this permission notice appear in all copies.  
+** 
+** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL  
+** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED  
+** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR  
+** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES  
+** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,  
+** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
+** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS  
+** SOFTWARE.  
+*/
+
+#include "Platform.h"
+#include "USBAPI.h"
+#include <avr/wdt.h>
+
+#if defined(USBCON)
+#ifdef CDC_ENABLED
+
+#if (RAMEND < 1000)
+#define SERIAL_BUFFER_SIZE 16
+#else
+#define SERIAL_BUFFER_SIZE 64
+#endif
+
+struct ring_buffer
+{
+	unsigned char buffer[SERIAL_BUFFER_SIZE];
+	volatile int head;
+	volatile int tail;
+};
+
+ring_buffer cdc_rx_buffer = { { 0 }, 0, 0};
+
+typedef struct
+{
+	u32	dwDTERate;
+	u8	bCharFormat;
+	u8 	bParityType;
+	u8 	bDataBits;
+	u8	lineState;
+} LineInfo;
+
+static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 };
+
+#define WEAK __attribute__ ((weak))
+
+extern const CDCDescriptor _cdcInterface PROGMEM;
+const CDCDescriptor _cdcInterface =
+{
+	D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1),
+
+	//	CDC communication interface
+	D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0),
+	D_CDCCS(CDC_HEADER,0x10,0x01),								// Header (1.10 bcd)
+	D_CDCCS(CDC_CALL_MANAGEMENT,1,1),							// Device handles call management (not)
+	D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6),				// SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported
+	D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE),	// Communication interface is master, data interface is slave 0
+	D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40),
+
+	//	CDC data interface
+	D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0),
+	D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0),
+	D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0)
+};
+
+int WEAK CDC_GetInterface(u8* interfaceNum)
+{
+	interfaceNum[0] += 2;	// uses 2
+	return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface));
+}
+
+bool WEAK CDC_Setup(Setup& setup)
+{
+	u8 r = setup.bRequest;
+	u8 requestType = setup.bmRequestType;
+
+	if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType)
+	{
+		if (CDC_GET_LINE_CODING == r)
+		{
+			USB_SendControl(0,(void*)&_usbLineInfo,7);
+			return true;
+		}
+	}
+
+	if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType)
+	{
+		if (CDC_SET_LINE_CODING == r)
+		{
+			USB_RecvControl((void*)&_usbLineInfo,7);
+			return true;
+		}
+
+		if (CDC_SET_CONTROL_LINE_STATE == r)
+		{
+			_usbLineInfo.lineState = setup.wValueL;
+
+			// auto-reset into the bootloader is triggered when the port, already 
+			// open at 1200 bps, is closed.  this is the signal to start the watchdog
+			// with a relatively long period so it can finish housekeeping tasks
+			// like servicing endpoints before the sketch ends
+			if (1200 == _usbLineInfo.dwDTERate) {
+				// We check DTR state to determine if host port is open (bit 0 of lineState).
+				if ((_usbLineInfo.lineState & 0x01) == 0) {
+					*(uint16_t *)0x0800 = 0x7777;
+					wdt_enable(WDTO_120MS);
+				} else {
+					// Most OSs do some intermediate steps when configuring ports and DTR can
+					// twiggle more than once before stabilizing.
+					// To avoid spurious resets we set the watchdog to 250ms and eventually
+					// cancel if DTR goes back high.
+	
+					wdt_disable();
+					wdt_reset();
+					*(uint16_t *)0x0800 = 0x0;
+				}
+			}
+			return true;
+		}
+	}
+	return false;
+}
+
+
+int _serialPeek = -1;
+void Serial_::begin(uint16_t baud_count)
+{
+}
+
+void Serial_::end(void)
+{
+}
+
+void Serial_::accept(void) 
+{
+	ring_buffer *buffer = &cdc_rx_buffer;
+	int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE;
+	
+	// if we should be storing the received character into the location
+	// just before the tail (meaning that the head would advance to the
+	// current location of the tail), we're about to overflow the buffer
+	// and so we don't write the character or advance the head.
+
+	// while we have room to store a byte
+	while (i != buffer->tail) {
+		int c = USB_Recv(CDC_RX);
+		if (c == -1)
+			break;	// no more data
+		buffer->buffer[buffer->head] = c;
+		buffer->head = i;
+
+		i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE;
+	}
+}
+
+int Serial_::available(void)
+{
+	ring_buffer *buffer = &cdc_rx_buffer;
+	return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE;
+}
+
+int Serial_::peek(void)
+{
+	ring_buffer *buffer = &cdc_rx_buffer;
+	if (buffer->head == buffer->tail) {
+		return -1;
+	} else {
+		return buffer->buffer[buffer->tail];
+	}
+}
+
+int Serial_::read(void)
+{
+	ring_buffer *buffer = &cdc_rx_buffer;
+	// if the head isn't ahead of the tail, we don't have any characters
+	if (buffer->head == buffer->tail) {
+		return -1;
+	} else {
+		unsigned char c = buffer->buffer[buffer->tail];
+		buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE;
+		return c;
+	}	
+}
+
+void Serial_::flush(void)
+{
+	USB_Flush(CDC_TX);
+}
+
+size_t Serial_::write(uint8_t c)
+{
+	/* only try to send bytes if the high-level CDC connection itself 
+	 is open (not just the pipe) - the OS should set lineState when the port
+	 is opened and clear lineState when the port is closed.
+	 bytes sent before the user opens the connection or after
+	 the connection is closed are lost - just like with a UART. */
+	
+	// TODO - ZE - check behavior on different OSes and test what happens if an
+	// open connection isn't broken cleanly (cable is yanked out, host dies
+	// or locks up, or host virtual serial port hangs)
+	if (_usbLineInfo.lineState > 0)	{
+		int r = USB_Send(CDC_TX,&c,1);
+		if (r > 0) {
+			return r;
+		} else {
+			setWriteError();
+			return 0;
+		}
+	}
+	setWriteError();
+	return 0;
+}
+
+// This operator is a convenient way for a sketch to check whether the
+// port has actually been configured and opened by the host (as opposed
+// to just being connected to the host).  It can be used, for example, in 
+// setup() before printing to ensure that an application on the host is
+// actually ready to receive and display the data.
+// We add a short delay before returning to fix a bug observed by Federico
+// where the port is configured (lineState != 0) but not quite opened.
+Serial_::operator bool() {
+	bool result = false;
+	if (_usbLineInfo.lineState > 0) 
+		result = true;
+	delay(10);
+	return result;
+}
+
+Serial_ Serial;
+
+#endif
+#endif /* if defined(USBCON) */