Renaming core to targets.

1 files changed, 0 insertions, 169 deletions

diff --git a/core/arduino/pins_arduino.c b/core/arduino/pins_arduino.c
deleted file mode 100755
index 3ef07b6..0000000
--- a/core/arduino/pins_arduino.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
-  pins_arduino.c - pin definitions for the Arduino board
-  Part of Arduino / Wiring Lite
-
-  Copyright (c) 2005 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id$
-*/
-
-#include <avr/io.h>
-#include "wiring_private.h"
-#include "pins_arduino.h"
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA8 & 168 / ARDUINO
-//
-//                  +-\/-+
-//            PC6  1|    |28  PC5 (AI 5)
-//      (D 0) PD0  2|    |27  PC4 (AI 4)
-//      (D 1) PD1  3|    |26  PC3 (AI 3)
-//      (D 2) PD2  4|    |25  PC2 (AI 2)
-// PWM+ (D 3) PD3  5|    |24  PC1 (AI 1)
-//      (D 4) PD4  6|    |23  PC0 (AI 0)
-//            VCC  7|    |22  GND
-//            GND  8|    |21  AREF
-//            PB6  9|    |20  AVCC
-//            PB7 10|    |19  PB5 (D 13)
-// PWM+ (D 5) PD5 11|    |18  PB4 (D 12)
-// PWM+ (D 6) PD6 12|    |17  PB3 (D 11) PWM
-//      (D 7) PD7 13|    |16  PB2 (D 10) PWM
-//      (D 8) PB0 14|    |15  PB1 (D 9) PWM
-//                  +----+
-//
-// (PWM+ indicates the additional PWM pins on the ATmega168.)
-
-
-#define PB 2
-#define PC 3
-#define PD 4
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint8_t PROGMEM port_to_mode_PGM[] = {
-	NOT_A_PORT,
-	NOT_A_PORT,
-	&DDRB,
-	&DDRC,
-	&DDRD,
-};
-
-const uint8_t PROGMEM port_to_output_PGM[] = {
-	NOT_A_PORT,
-	NOT_A_PORT,
-	&PORTB,
-	&PORTC,
-	&PORTD,
-};
-
-const uint8_t PROGMEM port_to_input_PGM[] = {
-	NOT_A_PORT,
-	NOT_A_PORT,
-	&PINB,
-	&PINC,
-	&PIND,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-	PD, /* 0 */
-	PD,
-	PD,
-	PD,
-	PD,
-	PD,
-	PD,
-	PD,
-	PB, /* 8 */
-	PB,
-	PB,
-	PB,
-	PB,
-	PB,
-	PC, /* 14 */
-	PC,
-	PC,
-	PC,
-	PC,
-	PC,
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-	_BV(0), /* 0, port D */
-	_BV(1),
-	_BV(2),
-	_BV(3),
-	_BV(4),
-	_BV(5),
-	_BV(6),
-	_BV(7),
-	_BV(0), /* 8, port B */
-	_BV(1),
-	_BV(2),
-	_BV(3),
-	_BV(4),
-	_BV(5),
-	_BV(0), /* 14, port C */
-	_BV(1),
-	_BV(2),
-	_BV(3),
-	_BV(4),
-	_BV(5),
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-	NOT_ON_TIMER, /* 0 - port D */
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	// on the ATmega168, digital pin 3 has hardware pwm
-#if defined(__AVR_ATmega168__)
-	TIMER2B,
-#else
-	NOT_ON_TIMER,
-#endif
-	NOT_ON_TIMER,
-	// on the ATmega168, digital pins 5 and 6 have hardware pwm
-#if defined(__AVR_ATmega168__)
-	TIMER0B,
-	TIMER0A,
-#else
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-#endif
-	NOT_ON_TIMER,
-	NOT_ON_TIMER, /* 8 - port B */
-	TIMER1A,
-	TIMER1B,
-#if defined(__AVR_ATmega168__)
-	TIMER2A,
-#else
-	TIMER2,
-#endif
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER, /* 14 - port C */
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-};
-